i
Gujarat Fluorochemicals
Filter interviews by
NPSH cavitation primary is the minimum pressure required to prevent cavitation in a pump.
NPSH stands for Net Positive Suction Head.
Cavitation is the formation of vapor bubbles in a liquid due to low pressure.
NPSH cavitation primary is the minimum pressure required to prevent the formation of vapor bubbles in a pump.
It is important to maintain NPSH cavitation primary to prevent damage to the pump and ensure efficient op...
Interlock is a safety mechanism that prevents two or more actions from occurring simultaneously.
Interlock ensures that a process or machine cannot be operated until certain conditions are met.
It is used to prevent accidents and damage to equipment.
Examples of interlocks include safety switches, emergency stop buttons, and lockout/tagout procedures.
Interlocks are commonly used in industrial settings, such as manufacturi...
LMTD stands for Logarithmic Mean Temperature Difference.
LMTD is a measure of the temperature difference between two fluids in a heat exchanger.
It is calculated using the logarithmic average of the temperature difference between the hot and cold fluids.
LMTD is used to determine the heat transfer rate in a heat exchanger.
It is an important parameter in the design and operation of heat exchangers.
For example, in a shell a...
Top trending discussions
I applied via Recruitment Consulltant and was interviewed in May 2024. There was 1 interview round.
DCS operation in a chemical plant involves monitoring and controlling various processes through a centralized control system.
DCS stands for Distributed Control System
Operators use DCS to monitor and control processes such as temperature, pressure, flow rates, and levels
DCS helps in optimizing plant operations, improving efficiency, and ensuring safety
Examples of DCS systems used in chemical plants include Honeywell Exp
Endpoints communicate with DCS through protocols like OPC, Modbus, Ethernet/IP, etc.
Endpoints send data to DCS using communication protocols like OPC (OLE for Process Control), Modbus, Ethernet/IP, etc.
DCS receives data from endpoints and sends control commands back using the same communication protocols.
Endpoints can be sensors, actuators, PLCs, HMIs, etc., connected to the DCS network.
Communication can be wired or wi
I applied via Walk-in and was interviewed in Nov 2023. There were 3 interview rounds.
Safety Quality 5S is maintained in our organization through regular audits, training, and employee involvement.
Regular audits are conducted to ensure compliance with safety standards and identify areas for improvement.
Training programs are provided to educate employees on safety protocols and best practices.
Employee involvement is encouraged through suggestions for improvement and participation in safety committees.
Exa...
I applied via Referral and was interviewed before Aug 2021. There was 1 interview round.
Paint is a liquid or paste material used to add color and protection to surfaces.
Paint is made up of pigments, binders, solvents, and additives.
Different types of paint include oil-based, water-based, and latex.
Paint can be used for decorative purposes or to protect surfaces from damage.
Paint can be applied using brushes, rollers, or sprayers.
Common paint finishes include matte, satin, and gloss.
1kl is equal to 1000 liters.
1kl = 1000 liters
kl stands for kiloliter
Used to measure volume of liquids
Solvents are liquids used to dissolve or dilute other substances. Paints are made up of pigments, binders, solvents, and additives.
Solvents are used to dissolve or dilute other substances in order to create a solution.
Paints are made up of pigments, binders, solvents, and additives.
Common solvents used in paint making include mineral spirits, turpentine, and acetone.
Solvents are important in paint making because they h...
Excel is a spreadsheet software used for data analysis and management. MSDS stands for Material Safety Data Sheet.
Excel is used for organizing and analyzing data in a tabular format
It allows users to perform calculations, create charts and graphs, and automate tasks
MSDS is a document that provides information about the properties and hazards of a chemical substance
It includes information on handling, storage, and emerg...
A discrepancy report is a document that highlights differences between two sets of data and identifies the reasons for the differences.
A discrepancy report is used to identify and resolve discrepancies between two sets of data.
It is important to include the reasons for the discrepancies in the report.
Examples of discrepancies include differences in inventory counts or financial statements.
The report should be clear and...
Industrial norms include safety standards that must be maintained to ensure workplace safety.
Safety standards are guidelines set by regulatory bodies to ensure safe working conditions.
Precautions include wearing appropriate personal protective equipment, following safety procedures, and reporting any hazards.
Examples of safety standards include OSHA in the US and ISO in Europe.
Safety standards cover areas such as elect...
I applied via Referral and was interviewed before Aug 2022. There were 2 interview rounds.
Safety is a top priority in plant operations to prevent accidents and ensure a secure work environment.
Safety protocols must be followed at all times
Regular safety training should be provided to all employees
Proper use of personal protective equipment (PPE) is essential
Emergency response plans should be in place and practiced regularly
I applied via Campus Placement and was interviewed in Jul 2022. There were 2 interview rounds.
Life work balance is the equilibrium between personal and professional life.
It is the ability to manage time and energy between work and personal life
It helps in reducing stress and burnout
Examples include spending time with family, pursuing hobbies, taking breaks from work
It varies for each individual and depends on their priorities and values
I applied via Recruitment Consulltant and was interviewed before Oct 2023. There were 2 interview rounds.
Operating plant involves monitoring and controlling various processes to ensure efficient production.
Monitor equipment and processes to ensure they are running smoothly
Adjust settings as needed to optimize production
Troubleshoot any issues that arise to minimize downtime
Follow safety protocols to ensure a safe working environment
Document all activities and maintain records for future reference
I remain calm, assess the situation, prioritize tasks, and take decisive action.
Remain calm and composed to think clearly
Assess the situation to understand the severity and potential risks
Prioritize tasks based on urgency and impact
Take decisive action to address the emergency effectively
I applied via Recruitment Consulltant and was interviewed in Jan 2024. There were 2 interview rounds.
Plant according tuition
Company in machinery accounting question
I applied via Company Website and was interviewed in Jan 2021. There was 1 interview round.
A work indication motor is a device that provides visual or auditory signals to indicate the status or progress of work.
Work indication motors use various mechanisms to generate signals, such as lights, sirens, or buzzers.
They are often used in industrial settings to alert workers about the completion of a task or the occurrence of an event.
For example, a work indication motor may be used in a manufacturing plant to si...
based on 1 interview
Interview experience
based on 6 reviews
Rating in categories
Assistant Supervisor
343
salaries
| ₹1.6 L/yr - ₹6.3 L/yr |
Senior Engineer
220
salaries
| ₹3.6 L/yr - ₹10 L/yr |
Engineer
201
salaries
| ₹3 L/yr - ₹7 L/yr |
Assistant Manager
160
salaries
| ₹5.2 L/yr - ₹15 L/yr |
Production Engineer
139
salaries
| ₹3 L/yr - ₹6.5 L/yr |
Pidilite Industries
Berger Paints
SRF
Kansai Nerolac Paints