Upload Button Icon Add office photos

GSP Crop Science

Compare button icon Compare button icon Compare

Filter interviews by

GSP Crop Science Interview Questions and Answers

Updated 12 Jul 2025
Popular Designations

26 Interview questions

A Production Supervisor was asked 5d ago
Q. What are endothermic and exothermic reactions?
Ans. 

Endothermic reactions absorb heat, while exothermic reactions release heat during the process.

  • Endothermic reactions require energy input, often in the form of heat.

  • Example: Photosynthesis, where plants absorb sunlight to convert CO2 and water into glucose.

  • Exothermic reactions release energy, usually as heat or light.

  • Example: Combustion of fuels, like burning wood or gasoline, which releases heat.

View all Production Supervisor interview questions
A Production Supervisor was asked 5d ago
Q. What is a scrubber vacuum system?
Ans. 

A scrubber vacuum system cleans air or liquids by removing contaminants using filtration and scrubbing techniques.

  • Used in industrial settings to control air pollution.

  • Involves a scrubber unit that removes particulates and gases.

  • Can be applied in wastewater treatment to purify effluents.

  • Examples include wet scrubbers for gas absorption and dry scrubbers for particulate removal.

View all Production Supervisor interview questions
A Senior Production Engineer was asked 4mo ago
Q. What are LEL, UEL, LD50, and LC50?
Ans. 

LEL stands for Lower Explosive Limit, UEL stands for Upper Explosive Limit, LD50 is the lethal dose for 50% of the population, LC50 is the lethal concentration for 50% of the population.

  • LEL is the lowest concentration of a gas or vapor in air that is capable of producing a flash of fire in presence of an ignition source.

  • UEL is the highest concentration of a gas or vapor in air that will burn or explode if an ignit...

View all Senior Production Engineer interview questions
An Executive was asked 4mo ago
Q. What is a confined space permit, and what are its requirements?
Ans. 

A confined space permit is a document that authorizes entry into a confined space and outlines safety requirements.

  • Confined space permits are required for entry into spaces that are not designed for continuous occupancy, have limited entry and exit points, and may contain hazards such as poor ventilation or toxic substances.

  • The permit typically includes information on the specific hazards present, required safety ...

View all Executive interview questions
An Executive was asked 4mo ago
Q. What are the different types of permits required in industries?
Ans. 

Permits required in industries include environmental permits, building permits, and operational permits.

  • Environmental permits are required to ensure compliance with regulations related to air quality, water pollution, waste management, etc.

  • Building permits are necessary for construction or renovation of facilities to ensure compliance with safety and zoning regulations.

  • Operational permits are needed for specific a...

View all Executive interview questions
A QC Chemist was asked
Q. Have you operated HPLC before?
Ans. 

Yes, I have operated HPLC before in previous roles.

  • Operated HPLC to analyze samples and generate data

  • Performed routine maintenance and troubleshooting on HPLC equipment

  • Interpreted chromatograms and reported results accurately

View all QC Chemist interview questions
A Production Supervisor was asked
Q. What is distillation?
Ans. 

Distillation is a process of separating components of a liquid mixture based on their different boiling points.

  • Distillation involves heating a liquid mixture to vaporize the more volatile components.

  • The vapor is then cooled and condensed back into a liquid, resulting in the separation of the components.

  • The component with the lower boiling point will vaporize first and be collected separately.

  • Distillation is common...

View all Production Supervisor interview questions
Are these interview questions helpful?
A Production Supervisor was asked
Q. What safety precautions were used before entering the plant?
Ans. 

Safety precautions before entering the plant included wearing personal protective equipment (PPE) and undergoing safety training.

  • Wearing appropriate PPE such as hard hats, safety glasses, gloves, and steel-toed boots

  • Undergoing safety training on plant hazards, emergency procedures, and proper use of equipment

  • Following specific entry procedures such as sign-in/sign-out protocols and safety checks

  • Participating in sa...

View all Production Supervisor interview questions
A Production Supervisor was asked
Q. What is the water pressure in a fire hydrant water tank?
Ans. 

The pressure of water in a fire hydrant water tank is typically around 7 kg.

  • The pressure in a fire hydrant water tank is measured in kilograms per square centimeter (kg/cm^2)

  • This pressure is necessary to ensure that water can be quickly and effectively sprayed onto a fire

  • The pressure may vary depending on the specific location and regulations

View all Production Supervisor interview questions
A Production Supervisor was asked
Q. What type of fire hydrant cylinder is used in chemical fires?
Ans. 

Mechanical foam cylinders are commonly used in chemical fires for their ability to quickly suppress flames by forming a blanket of foam.

  • Mechanical foam cylinders are effective in suppressing fires involving flammable liquids and chemicals.

  • The foam generated by these cylinders helps to smother the fire by cutting off the oxygen supply.

  • These cylinders are typically used in industrial settings where there is a higher...

View all Production Supervisor interview questions

GSP Crop Science Interview Experiences

25 interviews found

Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Jul 2024, where I was asked the following questions.

  • Q1. What is Vessel entry procedure and how we perform it?
  • Ans. 

    Vessel entry procedure ensures safety during confined space work, involving assessment, preparation, and monitoring.

    • Conduct a risk assessment to identify hazards before entry.

    • Obtain necessary permits, such as a confined space entry permit.

    • Ensure proper ventilation to prevent toxic gas accumulation.

    • Use personal protective equipment (PPE) like helmets and harnesses.

    • Assign a safety monitor outside the vessel to oversee th...

  • Answered by AI
  • Q2. What will you if we don't give you helper for work? How you do your work without helper?
  • Ans. 

    I would prioritize tasks, utilize tools effectively, and ensure safety while maintaining productivity without a helper.

    • Assess the workload: Identify critical tasks that need immediate attention.

    • Use technology: Leverage automation tools or machinery to assist in operations.

    • Implement safety protocols: Ensure all safety measures are followed to prevent accidents.

    • Organize work area: Keep tools and materials organized to mi...

  • Answered by AI
  • Q3. If helper denied to work,what will you do?
  • Ans. 

    Addressing a helper's refusal to work requires communication, understanding, and problem-solving skills to ensure productivity.

    • Engage in a calm conversation to understand their reasons for denial.

    • Offer support or assistance if they are facing challenges or concerns.

    • Discuss the importance of teamwork and how their role contributes to overall success.

    • If necessary, involve a supervisor to mediate and find a resolution.

  • Answered by AI
  • Q4. How do you expect (e.g. 5 LPA ) from us while your current ctc is (e.g. 3.2 LPA)? Your current company will take above 4 yesrs to reach 5 LPA and you expecting 5 LPA from us,how it is possible?
  • Ans. 

    I seek growth opportunities and believe my skills justify the expected salary increase.

    • I have gained significant skills and experience in my current role that can add immediate value to your team.

    • My current salary does not reflect my market value; industry standards for my role are higher.

    • I am looking for a position that aligns with my career goals and offers competitive compensation.

    • For example, I have successfully le...

  • Answered by AI
  • Q5. Why do you want to leave your current company even they have offered you a better sailary pakage?you want to direct jump for 5 LPA How it is possible?

Interview Preparation Tips

Interview preparation tips for other job seekers - I strictly advise to job seekers to select a better organisation don't join gsp. If you are jobless or you want to join olny gsp then ask a high sailary demad because the work culture is very bad and hr behaviour is so rude
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Very basic Maintenance related questions
  • Q2. Reactor, Pumps, Steam Ejector, vacuum Pumps

Interview Preparation Tips

Interview preparation tips for other job seekers - Average technical interview

Production Supervisor Interview Questions & Answers

user image alpesh kalsariya

posted on 9 Jul 2025

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Jun 2025, where I was asked the following questions.

  • Q1. What are endothermic and exothermic reactions?
  • Ans. 

    Endothermic reactions absorb heat, while exothermic reactions release heat during the process.

    • Endothermic reactions require energy input, often in the form of heat.

    • Example: Photosynthesis, where plants absorb sunlight to convert CO2 and water into glucose.

    • Exothermic reactions release energy, usually as heat or light.

    • Example: Combustion of fuels, like burning wood or gasoline, which releases heat.

  • Answered by AI
  • Q2. What is a scrubber vacuum system?
  • Ans. 

    A scrubber vacuum system cleans air or liquids by removing contaminants using filtration and scrubbing techniques.

    • Used in industrial settings to control air pollution.

    • Involves a scrubber unit that removes particulates and gases.

    • Can be applied in wastewater treatment to purify effluents.

    • Examples include wet scrubbers for gas absorption and dry scrubbers for particulate removal.

  • Answered by AI

QC Chemist Interview Questions & Answers

user image Anonymous

posted on 20 May 2024

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - One-on-one 

(3 Questions)

  • Q1. Definition of normality, morality, and molality.
  • Ans. 

    Normality, molarity, and molality are all concentration units used in chemistry.

    • Normality is the number of equivalents of a substance in a liter of solution.

    • Molarity is the number of moles of solute per liter of solution.

    • Molality is the number of moles of solute per kilogram of solvent.

  • Answered by AI
  • Q2. Have you operated HPLC before?
  • Ans. 

    Yes, I have operated HPLC before in previous roles.

    • Operated HPLC to analyze samples and generate data

    • Performed routine maintenance and troubleshooting on HPLC equipment

    • Interpreted chromatograms and reported results accurately

  • Answered by AI
  • Q3. What was your key duties in previous employment?
  • Ans. 

    In my previous role, I ensured product quality through rigorous testing and analysis, maintaining compliance with industry standards.

    • Conducted routine quality control tests on raw materials and finished products to ensure compliance with specifications.

    • Utilized analytical techniques such as HPLC and GC to analyze samples, ensuring accurate results for product release.

    • Maintained detailed records of testing procedures an...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for GSP Crop Science QC Chemist interview:
  • Solution Preparation
  • Molecular Weights
  • Laboratory Skills

Executive Interview Questions & Answers

user image sachin chaudhary

posted on 31 Dec 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Feb 2024.

Round 1 - Technical 

(3 Questions)

  • Q1. What are the different types of permits required in industries?
  • Ans. 

    Permits required in industries include environmental permits, building permits, and operational permits.

    • Environmental permits are required to ensure compliance with regulations related to air quality, water pollution, waste management, etc.

    • Building permits are necessary for construction or renovation of facilities to ensure compliance with safety and zoning regulations.

    • Operational permits are needed for specific activi...

  • Answered by AI
  • Q2. What is a confined space permit, and what are its requirements?
  • Ans. 

    A confined space permit is a document that authorizes entry into a confined space and outlines safety requirements.

    • Confined space permits are required for entry into spaces that are not designed for continuous occupancy, have limited entry and exit points, and may contain hazards such as poor ventilation or toxic substances.

    • The permit typically includes information on the specific hazards present, required safety equip...

  • Answered by AI
  • Q3. Unit process and operation
Round 2 - HR 

(2 Questions)

  • Q1. Salary discussion
  • Q2. Can you describe your family background?
  • Ans. 

    My family background is diverse and multicultural, with roots in various countries and traditions.

    • My parents are originally from different countries, which has influenced our family culture and traditions.

    • I have siblings who are spread out across the globe, leading to a wide range of perspectives and experiences within our family.

    • We often celebrate holidays and special occasions in unique ways that blend different cult...

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Dec 2023. There were 2 interview rounds.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Your previous company & your job profile?
  • Ans. 

    I worked at XYZ Company as a Quality Assurance Officer.

    • Conducted quality audits to ensure compliance with regulations

    • Developed and implemented quality control processes

    • Analyzed data to identify areas for improvement

    • Collaborated with cross-functional teams to address quality issues

  • Answered by AI
  • Q2. Your knowledge about interview and company profile ?
  • Ans. 

    I have researched the company's background and prepared for the interview.

    • Researched company history, values, products/services

    • Understand company culture and mission

    • Prepared questions to ask about the company during the interview

  • Answered by AI
Round 2 - Technical 

(1 Question)

  • Q1. Chemical compound basic knowledge?

Interview Preparation Tips

Interview preparation tips for other job seekers - Every all good experience.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Apr 2024. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. PH meter, Solubility,Karl Fisher, Chemical Structure, Density, Moisture,Hplc,Gc,Uv, Spectrometry,Ppm, Acidity.
Round 2 - HR 

(1 Question)

  • Q1. Salary Discussion,Education Background, Family Background,

Interview Preparation Tips

Topics to prepare for GSP Crop Science Quality Assurance Officer interview:
  • Chemistry
  • Organic Chemistry
  • Synthesis
Interview preparation tips for other job seekers - Prepare Basics of Chemistry.
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. What is LEL, uel , ld50 lc50
  • Ans. 

    LEL stands for Lower Explosive Limit, UEL stands for Upper Explosive Limit, LD50 is the lethal dose for 50% of the population, LC50 is the lethal concentration for 50% of the population.

    • LEL is the lowest concentration of a gas or vapor in air that is capable of producing a flash of fire in presence of an ignition source.

    • UEL is the highest concentration of a gas or vapor in air that will burn or explode if an ignition s...

  • Answered by AI
  • Q2. SAFETY PERMITS
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Oct 2023. There was 1 interview round.

Round 1 - Technical 

(8 Questions)

  • Q1. Unit process and operation
  • Q2. Boiling point of solvents.
  • Ans. 

    The boiling point of solvents varies depending on the specific solvent, with some common examples having boiling points ranging from room temperature to over 200 degrees Celsius.

    • Boiling point is the temperature at which a liquid turns into a gas.

    • Different solvents have different boiling points due to their molecular structures.

    • Common solvents like water have a boiling point of 100 degrees Celsius, while acetone has a b...

  • Answered by AI
  • Q3. Types of permit.?
  • Ans. 

    Types of permits include building permits, parking permits, and work permits.

    • Building permits are required for construction or renovation projects.

    • Parking permits are issued for designated parking areas.

    • Work permits are needed for certain types of employment, such as for minors.

    • Other types of permits include liquor licenses, gun permits, and environmental permits.

  • Answered by AI
  • Q4. Confined space permit details, o2 level, standby person etc.
  • Q5. Role of firewatch.
  • Ans. 

    Firewatch is responsible for monitoring and preventing fires in a specific area.

    • Monitoring designated area for signs of fire

    • Alerting authorities in case of fire

    • Ensuring safety protocols are followed

    • Using fire extinguishing equipment if necessary

  • Answered by AI
  • Q6. Role of Shift incharge/ supervisor
  • Ans. 

    Shift incharge/supervisor oversees operations, manages staff, ensures productivity and quality.

    • Responsible for managing and coordinating activities during their shift

    • Supervises staff to ensure tasks are completed efficiently and accurately

    • Addresses any issues or conflicts that arise during the shift

    • Ensures compliance with company policies and procedures

    • Reports to higher management on shift performance and any incidents

    • ...

  • Answered by AI
  • Q7. How will you get things done?
  • Ans. 

    I will prioritize tasks, delegate effectively, set clear goals, communicate openly, and adapt to changes.

    • Prioritize tasks based on importance and deadlines

    • Delegate tasks to team members with the right skills and resources

    • Set clear goals and milestones to track progress

    • Communicate openly with team members and stakeholders

    • Adapt to changes in priorities or circumstances

  • Answered by AI
  • Q8. Previous company experience, hazards of chemicals and safety measures.
  • Ans. 

    I have experience working with hazardous chemicals in my previous company and implementing safety measures to prevent accidents.

    • Implemented proper storage and handling procedures for hazardous chemicals

    • Conducted regular safety training sessions for employees on chemical hazards and safety protocols

    • Maintained updated safety data sheets for all chemicals used in the workplace

    • Ensured proper ventilation and personal protec...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Study above mentioned questions and you can pass easily.

Executive Interview Questions & Answers

user image Anonymous

posted on 7 Apr 2023

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Mass transfer operations ?
  • Q2. Distillation and its types ?
  • Ans. 

    Distillation is a process of separating components of a mixture based on their boiling points.

    • There are two main types of distillation: batch distillation and continuous distillation.

    • Batch distillation involves separating a mixture into its components in a single batch, while continuous distillation involves separating a mixture into its components over a continuous process.

    • Examples of distillation include the separati...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Make your self technically Strong and prepare well for any one mass transfer operations

Top trending discussions

View All
Interview Tips & Stories
1w (edited)
a team lead
Why are women still asked such personal questions in interview?
I recently went for an interview… and honestly, m still trying to process what just happened. Instead of being asked about my skills, experience, or how I could add value to the company… the questions took a totally unexpected turn. The interviewer started asking things like When are you getting married? Are you engaged? And m sure, if I had said I was married, the next question would’ve been How long have you been married? What does my personal life have to do with the job m applying for? This is where I felt the gender discrimination hit hard. These types of questions are so casually thrown at women during interviews but are they ever asked to men? No one asks male candidates if they’re planning a wedding or how old their kids are. So why is it okay to ask women? Can we please stop normalising this kind of behaviour in interviews? Our careers shouldn’t be judged by our relationship status. Period.
Got a question about GSP Crop Science?
Ask anonymously on communities.

GSP Crop Science Interview FAQs

How many rounds are there in GSP Crop Science interview?
GSP Crop Science interview process usually has 1-2 rounds. The most common rounds in the GSP Crop Science interview process are Resume Shortlist, Technical and One-on-one Round.
How to prepare for GSP Crop Science interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at GSP Crop Science. The most common topics and skills that interviewers at GSP Crop Science expect are Chemical, Agrochemicals, Pesticides, Technical and Operational Excellence.
What are the top questions asked in GSP Crop Science interview?

Some of the top questions asked at the GSP Crop Science interview -

  1. Types of valve's! How many type ejector use in Chemical industries? How to work...read more
  2. 1) What is distillation? 2)What are the types of pumps and principal? 3)what ...read more
  3. What is reactor , pump, distilestion , dry...read more
How long is the GSP Crop Science interview process?

The duration of GSP Crop Science interview process can vary, but typically it takes about less than 2 weeks to complete.

Tell us how to improve this page.

Overall Interview Experience Rating

4.2/5

based on 25 interview experiences

Difficulty level

Easy 18%
Moderate 73%
Hard 9%

Duration

Less than 2 weeks 73%
2-4 weeks 18%
More than 8 weeks 9%
View more

Interview Questions from Similar Companies

PI Industries Interview Questions
4.0
 • 119 Interviews
IFFCO Interview Questions
4.0
 • 43 Interviews
Rallis India Interview Questions
4.1
 • 42 Interviews
FMC Corporation Interview Questions
3.9
 • 36 Interviews
Bharat Rasayan Interview Questions
4.0
 • 30 Interviews
View all

GSP Crop Science Reviews and Ratings

based on 332 reviews

4.0/5

Rating in categories

3.8

Skill development

3.9

Work-life balance

3.4

Salary

3.8

Job security

3.7

Company culture

3.3

Promotions

3.8

Work satisfaction

Explore 332 Reviews and Ratings
Production Supervisor
150 salaries
unlock blur

₹1.7 L/yr - ₹4 L/yr

Executive
44 salaries
unlock blur

₹3.5 L/yr - ₹7 L/yr

Plant Operator
39 salaries
unlock blur

₹1.8 L/yr - ₹3.3 L/yr

Supervisor
34 salaries
unlock blur

₹2 L/yr - ₹3.8 L/yr

Shift Incharge
24 salaries
unlock blur

₹2.2 L/yr - ₹5.6 L/yr

Explore more salaries
Compare GSP Crop Science with

PI Industries

3.9
Compare

Deccan Fine Chemicals

3.7
Compare

Gharda Chemicals Limited

3.9
Compare

Rallis India

4.1
Compare
write
Share an Interview