Upload Button Icon Add office photos

Filter interviews by

Godrej Agrovet Production Engineer Interview Questions and Answers

Updated 11 Dec 2023

Godrej Agrovet Production Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jun 2023. There were 6 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Very Difficult and not like a MCQ it's theory exam

Round 3 - Group Discussion 

Intresting topics like entertainment

Round 4 - Technical 

(3 Questions)

  • Q1. All basics of chemical engineering and final Mega project
  • Q2. What about chemical engineering
  • Q3. Explain modes of Heat Transfer
  • Ans. 

    Heat can be transferred through conduction, convection, and radiation.

    • Conduction: Heat transfer through direct contact between objects or substances.

    • Convection: Heat transfer through the movement of fluids or gases.

    • Radiation: Heat transfer through electromagnetic waves, without the need for a medium.

    • Examples: Touching a hot pan (conduction), boiling water (convection), feeling the warmth of the sun (radiation).

  • Answered by AI
Round 5 - HR 

(1 Question)

  • Q1. About your family and interests and so many things
Round 6 - Assignment 

One more Goderej Test. it's very very Difficult and lack of time 30 questions and 30 minutes only they gives

Interview Preparation Tips

Interview preparation tips for other job seekers - very good experience and mostly good knowledge people company they gives Apportunity to work hear

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Jul 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. How to design heat exchanger?
  • Ans. 

    Designing a heat exchanger involves determining heat transfer requirements, selecting appropriate materials, and optimizing the design for efficiency.

    • Determine heat transfer requirements based on the fluids involved, flow rates, and temperature differentials.

    • Select appropriate materials based on the compatibility with the fluids, operating temperatures, and pressure requirements.

    • Optimize the design for efficiency by co...

  • Answered by AI
  • Q2. What is enthalphy?
  • Ans. 

    Enthalpy is a thermodynamic property that represents the total energy of a system, including internal energy and the amount of energy required to create or release the system.

    • Enthalpy is denoted by the symbol H and is expressed in units of energy (such as Joules or calories).

    • It is defined as H = U + PV, where U is the internal energy of the system, P is the pressure, and V is the volume.

    • Enthalpy change (ΔH) is commonly...

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Mar 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. General Questions regarding family, future plans etc
Round 3 - Technical 

(1 Question)

  • Q1. TPM, 5S, Process Excellence
Round 4 - One-on-one 

(1 Question)

  • Q1. TPM, Kaizen, JH, KK, 5S, filling operation

Interview Preparation Tips

Interview preparation tips for other job seekers - As I was from beverage industry, they asked me all filling machine related questions
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Jul 2019. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. Tell me about yourself
  • Ans. 

    Experienced Production Engineer with a background in mechanical engineering and a passion for optimizing manufacturing processes.

    • Bachelor's degree in Mechanical Engineering

    • 5+ years of experience in production engineering

    • Proficient in CAD software and process optimization techniques

    • Led a team to successfully implement lean manufacturing principles, resulting in a 20% increase in production efficiency

  • Answered by AI

Interview Questionnaire 

2 Questions

  • Q1. In one cum RCC, how many labors are required?
  • Ans. 

    The number of labors required in a cum RCC depends on various factors such as project size, complexity, and timeline.

    • The number of labors required in a cum RCC can vary depending on the size of the project. Larger projects may require more labors.

    • The complexity of the project also plays a role in determining the number of labors needed. More complex projects may require additional skilled labors.

    • The timeline of the pro...

  • Answered by AI
  • Q2. In ground level there is 3, below ground level there is 4, above ground level and at height there are 5 to 6 labors required.

Interview Questionnaire 

1 Question

  • Q1. Why are you leave current organization

I applied via Referral and was interviewed before Apr 2020. There were 6 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. How would your execute your job respinsibilities and meet the KRA's
  • Q2. Where do your Britannia as a competitor

Interview Preparation Tips

Interview preparation tips for other job seekers - Firstly, be confident and specific about what you say and try to back your statements with data if the job profile is for sales. Make sure you speak about the achievements if your best practise is incorporated.

I applied via Recruitment Consultant and was interviewed in Mar 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Difference between organic chemistry and inorganic chemistry?
  • Ans. 

    Organic chemistry deals with carbon-based compounds while inorganic chemistry deals with non-carbon-based compounds.

    • Organic chemistry involves the study of hydrocarbons, alcohols, carbohydrates, proteins, and nucleic acids.

    • Inorganic chemistry involves the study of metals, minerals, and non-carbon-based compounds like water, salts, and acids.

    • Organic compounds are generally covalently bonded while inorganic compounds can...

  • Answered by AI
  • Q2. Asked about various pump

Interview Preparation Tips

Interview preparation tips for other job seekers - You should export in things which you have mentioned in your resume. Ready to work at any area irrespective of your experience.

I applied via Walk-in and was interviewed before Jun 2020. There were 3 interview rounds.

Interview Questionnaire 

8 Questions

  • Q1. What is refulx ratio, and explain?
  • Ans. 

    Reflux ratio is the ratio of the amount of reflux to the amount of distillate in a distillation column.

    • Reflux ratio is an important parameter in distillation processes.

    • It is defined as the ratio of the amount of liquid returned to the column as reflux to the amount of liquid removed as distillate.

    • A high reflux ratio results in a higher purity of the distillate, but also requires more energy to maintain.

    • Reflux ratio can...

  • Answered by AI
  • Q2. R=f/d
  • Ans. 

    R=f/d is the formula for calculating resistance.

    • R is the resistance of the material

    • f is the force applied to the material

    • d is the distance over which the force is applied

    • The formula is commonly used in physics and engineering

    • Example: calculating the resistance of a wire

  • Answered by AI
  • Q3. What is loop ? And explain
  • Ans. 

    A loop is a programming construct that repeats a set of instructions until a specific condition is met.

    • Loops are used to automate repetitive tasks.

    • There are three types of loops: for, while, and do-while.

    • For loop is used when the number of iterations is known.

    • While loop is used when the number of iterations is unknown.

    • Do-while loop is used when the loop must execute at least once.

    • Example: for(int i=0; i<10; i++) { //co

  • Answered by AI
  • Q4. Open loop , close loop, case cade loop, split rang controlar,
  • Q5. What is f/o and F/c? Explain
  • Ans. 

    F/o and F/c are aviation terms used to refer to the first officer and flight crew respectively.

    • F/o stands for first officer, who is the second-in-command of the aircraft and assists the captain in flying the plane.

    • F/c stands for flight crew, which includes all the members of the crew who are responsible for the safety and comfort of the passengers.

    • The first officer is also known as the co-pilot and is responsible for m...

  • Answered by AI
  • Q6. Faild to open and faild to closed
  • Q7. Previous company plant what is responsibility
  • Q8. Distillation column work
  • Ans. 

    Distillation column is used to separate components of a mixture based on their boiling points.

    • It works on the principle of vapor-liquid equilibrium.

    • The mixture is heated and vaporized in the column.

    • The vapor rises and condenses at different heights based on their boiling points.

    • The condensed liquid is collected in trays or plates.

    • The separated components are then collected from different trays.

    • It is commonly used in th

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

Interview Questionnaire 

4 Questions

  • Q1. What is normality?
  • Ans. 

    Normality refers to the state of being normal or typical.

    • Normality is a statistical concept used to describe the distribution of data.

    • It is often represented by a bell-shaped curve, with the majority of data falling within one standard deviation of the mean.

    • Normality is important in quality control and process improvement, as deviations from normality can indicate problems in a system.

    • In chemistry, normality refers to ...

  • Answered by AI
  • Q2. Definatiin of ph?
  • Ans. 

    pH is a measure of the acidity or basicity of a solution.

    • pH stands for 'potential of hydrogen'

    • It is measured on a scale of 0-14

    • A pH of 7 is neutral, below 7 is acidic, and above 7 is basic

    • pH is important in many industries, including agriculture, medicine, and manufacturing

  • Answered by AI
  • Q3. How to prepare molar naoh solution?
  • Ans. 

    To prepare molar NaOH solution, dissolve the required amount of NaOH in distilled water and adjust the volume to the desired concentration.

    • Calculate the required amount of NaOH using the formula: mass = molarity x volume x molecular weight

    • Weigh the calculated amount of NaOH using a balance

    • Dissolve the NaOH in distilled water in a volumetric flask

    • Add distilled water to the flask to reach the desired volume

    • Mix the soluti

  • Answered by AI
  • Q4. What is reflux ratio?
  • Ans. 

    Reflux ratio is the ratio of the liquid reflux to the distillate produced in a distillation column.

    • It is an important parameter in distillation processes.

    • It determines the efficiency of the distillation column.

    • A higher reflux ratio results in a higher purity of the distillate.

    • Reflux ratio can be adjusted by changing the amount of reflux liquid or the distillate flow rate.

    • It is calculated as the ratio of the reflux liqu

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview of tata rallis is very though

Godrej Agrovet Interview FAQs

How many rounds are there in Godrej Agrovet Production Engineer interview?
Godrej Agrovet interview process usually has 6 rounds. The most common rounds in the Godrej Agrovet interview process are Resume Shortlist, Aptitude Test and Group Discussion.
What are the top questions asked in Godrej Agrovet Production Engineer interview?

Some of the top questions asked at the Godrej Agrovet Production Engineer interview -

  1. Explain modes of Heat Trans...read more
  2. all basics of chemical engineering and final Mega proj...read more
  3. what about chemical engineer...read more

Tell us how to improve this page.

Godrej Agrovet Production Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

UPL Interview Questions
4.1
 • 174 Interviews
Britannia Interview Questions
4.0
 • 164 Interviews
Syngenta Interview Questions
4.2
 • 67 Interviews
Rallis India Interview Questions
4.2
 • 38 Interviews
KRBL Interview Questions
4.0
 • 26 Interviews
Nuziveedu Seeds Interview Questions
4.0
 • 26 Interviews
View all
Godrej Agrovet Production Engineer Salary
based on 4 salaries
₹3.5 L/yr - ₹5.5 L/yr
17% more than the average Production Engineer Salary in India
View more details

Godrej Agrovet Production Engineer Reviews and Ratings

based on 3 reviews

4.6/5

Rating in categories

3.7

Skill development

4.8

Work-life balance

4.1

Salary

4.8

Job security

3.5

Company culture

3.5

Promotions

4.1

Work satisfaction

Explore 3 Reviews and Ratings
Sales Officer
112 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Officer
83 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Officer
66 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
60 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Officer
50 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Godrej Agrovet with

Venky's

3.7
Compare

Avanti Feeds

4.3
Compare

Prabhat Dairy

3.9
Compare

Rallis India

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview