GMDC Computer Operator Interview Questions and Answers

Q1. What tools are you using for purchase
Ans. 
I use various tools for purchase such as procurement software, vendor management systems, and e-procurement platforms.
• Procurement software

• Vendor management systems

• E-procurement platforms
Answered by AI
Add your answer
Q2. Brife introduction of your role
Ans. 
As an Associate, my role involves supporting senior team members, conducting research, analyzing data, and assisting with project management.
• Supporting senior team members in various tasks

• Conducting research and gathering data for projects

• Analyzing data to provide insights and recommendations

• Assisting with project management tasks such as scheduling and coordination
Answered by AI
Add your answer

Q1. Introduction, Last work experience
Add your answer
Q2. How much you except in salary
Add your answer

Q1. 1) overhauling of maintenance. 2) what is the function of cooling tower.
Ans. 
A cooling tower is a device used to remove heat from a building or industrial process.
• The function of a cooling tower is to cool down water or other fluids by extracting heat from them.

• Cooling towers are commonly used in HVAC systems, power plants, and industrial processes.

• They work by evaporating a small portion of the water, which removes heat and cools down the remaining water.

• The cooled water is then circulated bac...read more
Answered by AI
View 4 more answers
Q2. How to dismental of boiler feed pump
Ans. 
To dismantle a boiler feed pump, follow these steps
• Isolate the pump from the power source and drain the water from the system

• Remove the coupling and motor from the pump

• Disconnect the suction and discharge piping from the pump

• Remove the bolts and nuts that hold the pump casing together

• Lift the casing off the pump and remove the impeller and shaft

• Inspect and clean all parts before reassembling or replacing
Answered by AI
View 1 more answer

Basic Maths, Science & Gk

Indian economy - 10 min

Q1. Difference between vs Refrigeration
Ans. 
Air conditioning is the process of altering the properties of air to make it more comfortable, while refrigeration is the process of removing heat from a space or substance.
• Air conditioning is used to cool and dehumidify indoor air for comfort.

• Refrigeration is used to preserve food, medicine, and other perishable items.

• Air conditioning uses a refrigerant to absorb heat from indoor air and release it outside.

• Refrigerati...read more
Answered by AI
Add your answer
Q2. Thermodynamics cycle.
Add your answer
Q3. Material properties and usage in the real world
Ans. 
Material properties and usage are crucial in determining the performance and durability of products in the real world.
• Material properties such as strength, durability, and conductivity are important considerations in product design and development.

• Different materials have different properties and are suited for different applications. For example, steel is strong and durable, making it ideal for construction and manufa...read more
Answered by AI
Add your answer
Q4. Heat conduction vs Raidation
Ans. 
Heat conduction is the transfer of heat through a material, while radiation is the transfer of heat through electromagnetic waves.
• Heat conduction occurs in solids and liquids, while radiation can occur in vacuum or through transparent media.

• Heat conduction is slower than radiation.

• Examples of heat conduction include touching a hot stove or holding a warm cup of coffee, while examples of radiation include feeling the wa...read more
Answered by AI
Add your answer

Q1. Are you willing to relocate
Add your answer
Q2. What is ur Expected CTC
Ans. 
My expected CTC is in line with industry standards and commensurate with my experience and skills.
• My expected CTC is based on my current salary, industry standards, and the responsibilities of the role.

• I have researched the market and have a realistic expectation for my salary.

• I am open to negotiation based on the overall compensation package.

• I am looking for a fair and competitive salary that reflects my experience an...read more
Answered by AI
Add your answer

Discussion about Industry vs agriculture

Q1. About Projects and pumps
Add your answer
Q2. About Wagon tipper and mechanism
Add your answer

Easy technical and aptitude questions. They follow examveda.

Peer pressure boon or bane

Q1. What is Bayer process
Ans. 
The Bayer process is a method for refining bauxite into alumina, which is the precursor to aluminum production.
• The Bayer process involves crushing and grinding bauxite ore, then mixing it with sodium hydroxide at high temperatures to dissolve the alumina content.

• The resulting solution is filtered to remove impurities, then cooled and seeded to promote the precipitation of pure alumina hydrate.

• The alumina hydrate is the...read more
Answered by AI
Add your answer
Q2. What, according to you, most important dimensionless number and why
Ans. 
The most important dimensionless number is the Reynolds number, as it determines the flow regime of a fluid and is crucial in fluid dynamics.
• Reynolds number is used to predict flow patterns in different fluid flow situations

• It is defined as the ratio of inertial forces to viscous forces in a fluid flow

• Reynolds number helps in determining whether the flow is laminar, turbulent, or transitional

• It is widely used in engine...read more
Answered by AI
Add your answer
Q3. One equation that correlates HT and Fluid flow
Ans. 
The equation that correlates HT and fluid flow is the Darcy-Weisbach equation.
• The Darcy-Weisbach equation relates the head loss due to friction in a pipe to the velocity and diameter of the pipe, as well as the friction factor.

• It is commonly used in fluid mechanics and hydraulic engineering to calculate pressure drop in pipes.

• The equation is expressed as: hL = f * (L/D) * (V^2/2g), where hL is the head loss, f is the f...read more
Answered by AI
Add your answer
Q4. Systems in thermodynamics
Ans. 
Systems in thermodynamics refer to the specific region of space or a quantity of matter under study.
• A system can be open, closed, or isolated based on the exchange of matter and energy with its surroundings.

• Examples of systems include a gas in a container, a piston-cylinder assembly, or a steam turbine.

• Thermodynamic properties such as temperature, pressure, and volume are used to describe the state of a system.

• The firs...read more
Answered by AI
Add your answer
Q5. What is dry steam and wet steam
Ans. 
Dry steam has low moisture content and high temperature, while wet steam has high moisture content and lower temperature.
• Dry steam is produced when water is heated to its boiling point and vaporizes without any liquid water droplets present.

• Wet steam contains water droplets suspended in the steam, resulting in a lower temperature compared to dry steam.

• Dry steam is commonly used in steam turbines for power generation, w...read more
Answered by AI
Add your answer

The aptitude test is conducted.

In a discussion on a specific topic, there is a group of five people present for the group discussion.

Q1. What is a transformer?
Ans. 
A transformer is an electrical device that transfers electrical energy between circuits through electromagnetic induction.
• Transforms voltage levels: Increases (step-up) or decreases (step-down) voltage.

• Used in power distribution: Essential for transmitting electricity over long distances.

• Consists of primary and secondary coils: Energy is transferred through magnetic fields.

• Example: A step-down transformer reduces 220V
Answered by AI
Add your answer

1st round of interview was Aptitude test for 1 hr and topics were mostly logical analysis and quants

Topic was development of technology in India how it is going to affect

Q1. Define what is hooks law
Ans. 
Hook's law states that the force needed to extend or compress a spring by a certain distance is proportional to that distance.
• Force needed to extend or compress a spring is directly proportional to the displacement

• The formula for Hook's law is F = kx, where F is the force, k is the spring constant, and x is the displacement

• It is used to calculate the behavior of springs, elastic materials, and other systems under stres
Answered by AI
Add your answer
Q2. What is pearlite material
Ans. 
Pearlite is a two-phased lamellar structure composed of alternating layers of ferrite and cementite in carbon steel.
• Pearlite forms when austenite transforms during the cooling process of steel

• It is a common microstructure in carbon steels

• Pearlite provides strength and hardness to the steel

• It is often used in engineering applications for its desirable properties
Answered by AI
Add your answer
Q3. What is the composition of steel
Ans. 
Steel is primarily composed of iron and carbon, with small amounts of other elements like manganese, phosphorus, sulfur, and silicon.
• Steel is mainly made up of iron and carbon

• Carbon content typically ranges from 0.2% to 2.1%

• Other elements like manganese, phosphorus, sulfur, and silicon are also present in small amounts

• Alloying elements like nickel, chromium, and molybdenum can be added to enhance specific properties
Answered by AI
Add your answer
Q4. Tell me about yourself
Add your answer
Q5. Which subject do you like most
Add your answer