Upload Button Icon Add office photos

Filter interviews by

Giridhan Metal DCS Engineer Interview Questions and Answers

Updated 1 Sep 2023

Giridhan Metal DCS Engineer Interview Experiences

1 interview found

DCS Engineer Interview Questions & Answers

user image Anonymous

posted on 1 Sep 2023

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Sep 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Safety valve, coc, dmp, loi, bed material
Round 3 - One-on-one 

(1 Question)

  • Q1. Salary negotiation, low salary

Interview questions from similar companies

I applied via Naukri.com and was interviewed in Nov 2019. There were 3 interview rounds.

Interview Questionnaire 

8 Questions

  • Q1. About your professional & family details
  • Q2. Is there any previous experience about coke oven plants & steel industry
  • Q3. If you have the previous experience about those plant then they will ask u question regarding those plant systems.
  • Q4. Tell me two most Appreciateable job you have done and two mistakes with the findings from that mistake.
  • Q5. About PCS7 software knowledge & siemens plc automation related details
  • Q6. Field instruments related questions, like control valves, transmitters, analyzers etc.
  • Q7. How to calibrate a control valve
  • Ans. 

    Control valve calibration involves adjusting the valve to ensure it operates within specified parameters.

    • Determine the valve's operating range and desired set points

    • Use a calibration bench or in-line calibration equipment to adjust the valve's position and response time

    • Verify the valve's performance using a flow meter or pressure gauge

    • Document the calibration process and results for future reference

  • Answered by AI
  • Q8. Pcs7 server client systems

Interview Preparation Tips

Interview preparation tips for other job seekers - I given interview for the post of Automation & Instrument engineer. So the most interviews are related to technical instruments and PLC automation.
HR round is very general discussion, No Group discussion held.
Overall you have a good interviewing experience if you have a sound technical skills in your field.
Interview has two part
1. Telephonic interview with general details & basic technical question related to that post.
2. On site interview with details discussion & technical & HR discussion.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2024. There were 2 interview rounds.

Round 1 - HR 

(3 Questions)

  • Q1. How many years experience in field survey?
  • Ans. 

    I have 8 years of experience in field surveying.

    • I have 8 years of experience in conducting field surveys for various projects.

    • I am proficient in using surveying equipment such as total stations and GPS devices.

    • I have experience in analyzing survey data and creating detailed reports.

    • I have worked on projects ranging from land development to infrastructure construction.

  • Answered by AI
  • Q2. Do you have any Knowledge in DGPS and Total Station
  • Ans. 

    Yes, I have knowledge in DGPS and Total Station.

    • I have experience using DGPS for precise positioning in surveying and mapping.

    • I am familiar with Total Station equipment for measuring angles and distances in surveying.

    • I have used both DGPS and Total Station in various engineering projects.

    • I am proficient in data collection and analysis using DGPS and Total Station technology.

  • Answered by AI
  • Q3. What is your current CTC per month and year
  • Ans. 

    My current CTC per month is $10,000 and per year is $120,000.

    • Current CTC per month: $10,000

    • Current CTC per year: $120,000

  • Answered by AI
Round 2 - Technical 

(8 Questions)

  • Q1. What is the Definition of Topography Survey ? And Explain it!
  • Ans. 

    Topography survey is a detailed mapping of the natural and man-made features of a piece of land.

    • Topography survey involves measuring and mapping the elevation, contours, and features of a land area.

    • It helps in understanding the terrain, drainage patterns, and existing structures on the land.

    • Topography surveys are essential for construction projects, land development, and environmental assessments.

    • Surveyors use speciali...

  • Answered by AI
  • Q2. What is RL?
  • Ans. 

    RL stands for Reinforcement Learning, a type of machine learning where an agent learns to make decisions by interacting with an environment.

    • RL involves an agent learning to take actions in an environment to maximize some notion of cumulative reward.

    • It is based on the idea of trial and error learning, where the agent learns from the consequences of its actions.

    • Examples of RL algorithms include Q-Learning, Deep Q Network

  • Answered by AI
  • Q3. How to prepare google KMZ file? And Explain it!
  • Ans. 

    A KMZ file is a compressed version of a KML file used for displaying geographic data in Google Earth.

    • Create or download a KML file with geographic data

    • Compress the KML file using a tool like 7-Zip or WinZip

    • Change the file extension from .zip to .kmz

    • Open the KMZ file in Google Earth to view the geographic data

  • Answered by AI
  • Q4. What is the Traverse?
  • Ans. 

    The Traverse is a method used in surveying and navigation to move through an area by taking a series of connected measurements and directions.

    • Traverse involves measuring distances and angles between points to create a connected path.

    • It is commonly used in land surveying, construction, and navigation.

    • Traverse can be closed or open depending on whether it returns to the starting point.

    • Example: A land surveyor uses a trav

  • Answered by AI
  • Q5. How to distribute an error in any Point?
  • Ans. 

    Error distribution in a point can be achieved by considering the uncertainty in measurements and applying statistical methods.

    • Consider the uncertainty in measurements to determine the range of possible values for the point.

    • Apply statistical methods such as standard deviation to distribute the error around the point.

    • Use error propagation techniques to calculate the overall error in the point based on the errors in indiv

  • Answered by AI
  • Q6. How to work the Total Station? And how to layout any area by Total Station it explain!
  • Ans. 

    Total Station is a surveying instrument used for measuring angles and distances to accurately layout areas.

    • Set up the Total Station at a known point with a clear line of sight to the area to be surveyed.

    • Calibrate the instrument by leveling it and inputting the necessary parameters such as height and angle.

    • Measure distances and angles to various points in the area to create a detailed map or layout.

    • Use the data collecte...

  • Answered by AI
  • Q7. How many years experience in Total Station, Auto level,Digital level, and Theodolite, and Digital Theodolite?
  • Ans. 

    I have 8 years of experience in Total Station, Auto level, Digital level, Theodolite, and Digital Theodolite.

    • 8 years experience in Total Station, Auto level, Digital level, Theodolite, and Digital Theodolite.

    • Proficient in using all mentioned surveying instruments.

    • Experience in conducting precise measurements for various projects.

    • Skilled in data collection and analysis using these instruments.

  • Answered by AI
  • Q8. What is difference in Dumpy level, auto level, and digital level?
  • Ans. 

    Dumpy level, auto level, and digital level are all types of surveying instruments used for measuring horizontal and vertical levels.

    • Dumpy level is a basic surveying instrument with a telescope and bubble level for measuring horizontal and vertical angles.

    • Auto level is a more advanced version of a dumpy level that automatically adjusts the line of sight to be horizontal.

    • Digital level is a modern surveying instrument tha...

  • Answered by AI

I applied via Approached by Company and was interviewed before May 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. All about area related work
Round 3 - HR 

(1 Question)

  • Q1. Package finalizing and house allotment process

Interview Preparation Tips

Interview preparation tips for other job seekers - Good to go for freshers, its most trusted brand in steel making, but work hours may vary depending on your area of working
Interview experience
4
Good
Difficulty level
Hard
Process Duration
4-6 weeks
Result
Selected Selected
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. 1) What about work experience. 2) what's quality of maintenance engg. 3) What is your idea of a successful maintenance team. 4) servo valve working principle. And difference between servo valve and propor...
Round 3 - HR 

(1 Question)

  • Q1. Normal questions like 1) why do you want to this job. 2) salary expectations. 3) why should we hire you .....etc
Round 4 - Group Discussion 

6 members are there one topic provided how to take action following topics.
1) what is relation between mechanical and electrical systems.
2) work from home pros and cons.
3) Covid 19 impacts on steel sector.
4) For one month charge of mechanical maintenance GM how to handle it.

Interview Preparation Tips

Interview preparation tips for other job seekers - In interview time selecte your strong zone.that is full knowledge about this equipment, systems etc.
Updated new technologies in maintenance department.
Improve communication skills. Adoption culture at company fellowship.

I applied via Naukri.com

Round 1 - Technical 

(2 Questions)

  • Q1. TECHNICAL FOR MECHATRONICS
  • Q2. Tell me about your supported

Interview Preparation Tips

Interview preparation tips for other job seekers - I had done B.tch Electrical and Electronic Engineering with 6 years experience in Material Handling & Heavy Earthmoving Hydraulics Equipment Maintenance & Troubleshooting Machinery like Hydraulic Truck , Hydraulic Excavators, Loader, Forklift reach truck, (Like, Komatsu, Toyota & CAT), Commissioning, planning for the Major Overhauling Hydraulic Excavator, Hydraulic Loder, Hydraulic Forklift & All Electrical types Work )
Working at Toyota material handling coustomer handling 2 month and till working.
Working at Larsen & toubro Ltd Deputed to Larsen & Toubro construction mining equipment business Repair And Product Support .
5 years 10months hand on experience in preventive & breakdown of machines ,
Technical well sound undertaking repair, maintenance, testing of earthmoving equipments L&T komatsu Ltd.
Assembly & Disassembly of all komatsu machines & Engine.
Heaving troubleshooting experience of all following L&T products .All model of L&T 72ck ,L&T90ck,300ck.
Engines:-
SAA6D170E-3,SAA6D170E-5,SAA4D95L-3, S6D95L-1,SAA6D102E-1,SAA6D114-1,
SAA6D125-3,SAA6D-3.
Excavator:-
PC130,PC200,PC210,PC300,PC450-7,PC600,PC1250_8R,
Heaving all komatsu engine repairs assembly, Disassembly.
GRADER :- GD511A-1.
Hydraulic DAMPERS :-HD 465-7EO,HD785,HD465-7R
SCANIA ENGINE :-P410
Wheel LOADERS :-WA800-3EO,WA900-3EO
TRANSMISSION :-D155A-5,GD511A-1.
FINAL DRIVE :-D475-3.
Dozer : D155A-6, D4758A-5,D65,D85,D275,

I applied via Walk-in and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Good working good thinking best work is worhship.

Interview Preparation Tips

Interview preparation tips for other job seekers - Good working and good thinking the best .

Interview Questionnaire 

1 Question

  • Q1. Regarding Working Area whole interview

Interview Preparation Tips

Interview preparation tips for other job seekers - Be perfect with your working knowledge & Be confident always 😊
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jul 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Only for our work experience questions asked.
Round 3 - HR 

(1 Question)

  • Q1. Hr round check our confidence and current working salary nigotiation

Interview Preparation Tips

Interview preparation tips for other job seekers - Do not have a over confidence dureton on interview time.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. General technical questions
Round 3 - Group Discussion 

Social responsibility and culture related topic

Round 4 - One-on-one 

(2 Questions)

  • Q1. Family Details were asked by interviewer.
  • Q2. Passion and like and dislikes were asked

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident

Giridhan Metal Interview FAQs

How many rounds are there in Giridhan Metal DCS Engineer interview?
Giridhan Metal interview process usually has 3 rounds. The most common rounds in the Giridhan Metal interview process are Resume Shortlist, Technical and One-on-one Round.

Tell us how to improve this page.

Giridhan Metal DCS Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.4k Interviews
Accenture Interview Questions
3.8
 • 8.1k Interviews
Infosys Interview Questions
3.6
 • 7.5k Interviews
Wipro Interview Questions
3.7
 • 5.6k Interviews
Cognizant Interview Questions
3.8
 • 5.6k Interviews
Amazon Interview Questions
4.1
 • 5k Interviews
Capgemini Interview Questions
3.7
 • 4.8k Interviews
Tech Mahindra Interview Questions
3.5
 • 3.8k Interviews
HCLTech Interview Questions
3.5
 • 3.8k Interviews
Genpact Interview Questions
3.8
 • 3.1k Interviews
View all
Giridhan Metal DCS Engineer Salary
based on 4 salaries
₹4 L/yr - ₹4.6 L/yr
9% less than the average DCS Engineer Salary in India
View more details

Giridhan Metal DCS Engineer Reviews and Ratings

based on 2 reviews

3.6/5

Rating in categories

3.6

Skill development

3.6

Work-life balance

2.6

Salary

4.5

Job security

3.6

Company culture

2.6

Promotions

3.6

Work satisfaction

Explore 2 Reviews and Ratings
Assistant Manager
21 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
18 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
16 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
14 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Officer
8 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Giridhan Metal with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Hindalco Industries

4.2
Compare

Vedanta Limited

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview