Filter interviews by
Clear (1)
I applied via Campus Placement and was interviewed in Feb 2023. There were 3 interview rounds.
Top trending discussions
I appeared for an interview in Nov 2020.
posted on 24 Jul 2021
Fuselage station refers to a specific location on an aircraft's fuselage.
Fuselage station is a measurement of distance along the fuselage, typically measured in inches or millimeters.
It is used as a reference point for various components and systems on the aircraft.
For example, an aircraft's doors, windows, wings, and tail are all located at specific fuselage stations.
Fuselage station 0 is usually defined as the refere...
Butt line is not a commonly used term. It could refer to the line where the buttocks meet the thighs.
Butt line is not a medical term.
It could refer to the line where the buttocks meet the thighs.
It is not a commonly used term and may have different interpretations depending on the context.
Water line refers to the pipe or tubing that carries water from the main supply to a building or property.
Water line is an essential component of a plumbing system.
It can be made of various materials such as copper, PVC, or galvanized steel.
The size of the water line depends on the water demand of the building or property.
Water lines can be underground or above ground.
A water line break or leak can cause significant da
The question is unclear and seems to contain errors.
The question may be referring to 'fast angle' and 'third angle projection' in technical drawing.
Fast angle refers to a type of projection where the object is viewed from an angle that is not perpendicular to any of its faces.
Third angle projection is a method of drawing 3D objects in which the object is placed in a box with three sides and projected onto a plane.
Witho...
A rivet is a metal fastener used to join two or more pieces of material together permanently.
Rivets are commonly used in construction, automotive, and aerospace industries.
They are inserted into pre-drilled holes and then deformed to hold the materials together.
Rivets can be made of various materials including aluminum, steel, and copper.
They are often used in place of screws or bolts when a permanent joint is required...
The number of cutting angles in a reamer varies depending on the type and size of the reamer.
The number of cutting angles can range from 2 to 6.
The cutting angles are designed to remove material from the workpiece as the reamer rotates.
The cutting angles can be straight or spiral, and can be symmetrical or asymmetrical.
The number and angle of the cutting edges can affect the surface finish and accuracy of the hole.
Exam...
Drill bits can have various cutting angles depending on their purpose and material.
The most common cutting angle for general purpose drill bits is 118 degrees.
Drill bits for harder materials like metal may have a sharper angle of 135 degrees.
Masonry drill bits have a flatter angle of 90 degrees to prevent cracking of the material.
The cutting angle affects the efficiency and precision of the drilling process.
Drill bits are made by various manufacturers using different materials and designs.
Drill bits can be made from high-speed steel, cobalt, carbide, or diamond.
Manufacturers include DeWalt, Bosch, Milwaukee, and Irwin.
The design of the drill bit can vary depending on the intended use, such as twist bits, spade bits, or hole saws.
The number of cutting files depends on the project requirements and design complexity.
The number of cutting files can range from a few to hundreds or even thousands.
It also depends on the type of cutting machine being used.
For example, a laser cutting machine may require different files than a CNC router.
The number of cutting files can also vary based on the material being cut and its thickness.
It is important to have ...
I applied via Campus Placement and was interviewed in Oct 2017. There were 3 interview rounds.
I applied via Campus Placement and was interviewed in Dec 2016. There were 4 interview rounds.
posted on 4 Dec 2016
I applied via Campus Placement and was interviewed in Dec 2016. There were 7 interview rounds.
The interview covered topics on stress and fatigue, including plane stress, S-N curve, and technical problems with a product.
Plane stress refers to a state where stress is only present in two dimensions, while plane stress condition is when stress is present in all three dimensions.
S-N curve is a graph that shows the relationship between stress and the number of cycles to failure.
High cycle fatigue occurs when a materi...
Rolls-Royce is a British multinational engineering company that designs, manufactures, and services power systems for aviation and other industries.
Rolls-Royce is facing financial challenges due to the COVID-19 pandemic.
As an engineer, I can bring innovative solutions to improve efficiency and reduce costs.
Rolls-Royce customers include airlines, defense organizations, and energy companies.
I recently faced a challenge o...
I appeared for an interview before Oct 2020.
I applied via Walk-in and was interviewed before Apr 2021. There were 2 interview rounds.
I applied via LinkedIn and was interviewed in Dec 2021. There were 4 interview rounds.
I applied via Job Portal
based on 1 interview
Interview experience
based on 6 reviews
Rating in categories
Junior Engineer
141
salaries
| ₹2.4 L/yr - ₹4.6 L/yr |
Lead Engineer
48
salaries
| ₹12 L/yr - ₹23 L/yr |
Trainee
47
salaries
| ₹1.5 L/yr - ₹3 L/yr |
Assistant Engineer
46
salaries
| ₹3.4 L/yr - ₹5.5 L/yr |
Enterprise Application Engineer
35
salaries
| ₹8.9 L/yr - ₹15 L/yr |
Rolls-Royce
Pratt & Whitney
Honeywell Aerospace
Safran Aircraft Engines