Upload Button Icon Add office photos

Filter interviews by

Flash Viven Machining Technologies Quality Inspector Interview Questions and Answers

Updated 7 Apr 2022

Flash Viven Machining Technologies Quality Inspector Interview Experiences

1 interview found

I applied via Approached by Company

Round 1 - HR 

(1 Question)

  • Q1. My self employed related
Round 2 - Technical 

(1 Question)

  • Q1. 7 qc tools and equipment
Round 3 - Technical 

(1 Question)

  • Q1. Quality in process customer
  • Ans. 

    Quality in process customer refers to ensuring that the customer's needs and expectations are met during the production process.

    • Regular communication with the customer to understand their requirements

    • Implementing quality control measures to ensure the product meets customer specifications

    • Conducting customer satisfaction surveys to gather feedback

    • Addressing any customer complaints or concerns promptly

    • Continuous improvem...

  • Answered by AI
Round 4 - Group Discussion 

Company related

Interview Preparation Tips

Interview preparation tips for other job seekers - Quality inspector and final assembly checking bajaj company gears parts

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed in Apr 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Question about stress strain diagram

Interview Preparation Tips

Interview preparation tips for other job seekers - draw the drawing and explain

I applied via Recruitment Consulltant and was interviewed before Jun 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Quality 

(1 Question)

  • Q1. What is Quality, what is 7Qc tools, what is 8QB , what is 7 sefty fundamental, what is 7 golden Rule, what is 5S.
  • Ans. 

    Quality is meeting or exceeding customer expectations. 7QC tools, 8D, 7 safety fundamentals, 7 golden rules, and 5S are quality improvement methodologies.

    • 7QC tools are a set of problem-solving tools used to improve quality. Examples include Pareto charts, fishbone diagrams, and control charts.

    • 8D is a problem-solving methodology used to identify, correct, and prevent problems. It involves eight steps, including defining...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Faurecia Quality Inspector interview:
  • Quality
Interview preparation tips for other job seekers - Good behaviour, respect the all senior person, mutual understanding, always Work in harmony. Work diligently.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Sep 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Relatee to department Safety Quality inspection , audits, setupapproval Etc
Round 3 - One-on-one 

(2 Questions)

  • Q1. Quality related
  • Ans. I attempt all questions with cofidently
  • Answered Anonymously
  • Q2. 7 qc tools, 5 core tools, measuring intruments, etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Never nervous in interview
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview before Mar 2024, where I was asked the following questions.

  • Q1. As a fresher they about yourself
  • Q2. And qualification
Round 1 - One-on-one 

(1 Question)

  • Q1. Company experience and other details

Interview Preparation Tips

Interview preparation tips for other job seekers - Grup discussion for any times????????????????????????????????????????
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Nov 2024. There were 2 interview rounds.

Round 1 - HR 

(3 Questions)

  • Q1. What is the 5S methodology?
  • Ans. 

    5S methodology is a systematic approach to workplace organization and standardization.

    • Sort: Separate necessary items from unnecessary items and remove clutter.

    • Set in Order: Organize necessary items in a logical and efficient manner.

    • Shine: Clean and maintain the work area to ensure safety and efficiency.

    • Standardize: Establish and maintain standards for organization and cleanliness.

    • Sustain: Implement practices to sustain

  • Answered by AI
  • Q2. What is quality control?
  • Ans. 

    Quality control is a process used to ensure that products or services meet specified requirements and standards.

    • Quality control involves monitoring and inspecting products or services to identify defects or deviations from standards.

    • It includes implementing corrective actions to address any issues found during the inspection process.

    • Quality control aims to improve processes and prevent defects from occurring in the fut...

  • Answered by AI
  • Q3. Why are Quality infection
  • Ans. 

    Quality inspections are necessary to ensure products meet standards and specifications.

    • Quality inspections help identify defects and prevent faulty products from reaching customers

    • They ensure products meet regulatory requirements and industry standards

    • Quality inspections help maintain consistency and reliability in products

    • They can also help improve processes and identify areas for enhancement

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. What is the concept of Kaizen?
  • Ans. 

    Kaizen is a Japanese business philosophy of continuous improvement involving all employees.

    • Kaizen focuses on making small, incremental changes to processes in order to improve efficiency and quality.

    • It involves all employees in the organization, from top management to frontline workers, in identifying and implementing improvements.

    • Kaizen emphasizes the importance of standardizing processes and then continuously improvi...

  • Answered by AI
  • Q2. What is the difference between Quality Assurance (QA) and Quality Control (QC)?
  • Ans. 

    QA focuses on preventing defects in the production process, while QC focuses on identifying defects in the final product.

    • QA is process oriented, focusing on preventing defects by setting up processes and standards.

    • QC is product oriented, focusing on identifying defects in the final product through inspections and testing.

    • QA involves activities like process design, training, and audits to ensure quality standards are me...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for DENSO Quality Inspector interview:
  • 2 Years
Interview preparation tips for other job seekers - This job is very important for my career as it contributes significantly to my overall development.

I applied via Company Website and was interviewed in Feb 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. What are your salary expectations?
  • Q2. Tell me about yourself.

Interview Preparation Tips

Topics to prepare for Faurecia Quality Inspector interview:
  • Diploma
  • Quality Inspection
Interview preparation tips for other job seekers - Name : Vinod
Mob no : XXXXX
Experience : 1year
Worked in : Indo-Mim Pvt Ltd Hoskote Banglore
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
Not Selected

I applied via Walk-in and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(4 Questions)

  • Q1. What is Your name ?
  • Q2. Tell me about your qualification ?
  • Q3. Ever worked Before if yes where and which company ?
  • Q4. Have you any techanical skill ?

Interview Preparation Tips

Topics to prepare for CIE Automotive Quality Inspector interview:
  • AutoCAD
  • Solid Works
Interview preparation tips for other job seekers - Always Having dressing sense. increasing your confident with your body action and speaking

I applied via Recruitment Consultant and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. GD&T symbols & explanation
  • Ans. 

    GD&T symbols are used to specify geometric tolerances on engineering drawings.

    • GD&T stands for Geometric Dimensioning and Tolerancing

    • It is a system of symbols used to specify the allowable variation in form and size of features on a part

    • Examples of GD&T symbols include: flatness, perpendicularity, concentricity, and position

    • GD&T is important for ensuring parts are manufactured to the correct specifications and fit toget

  • Answered by AI
  • Q2. How to check true position on CMM
  • Ans. 

    True position on CMM can be checked using a combination of software and hardware tools.

    • Use a calibrated probe to measure the feature location

    • Compare the measured location with the nominal location

    • Calculate the deviation and compare it with the tolerance

    • Use software tools like GD&T to analyze the results

    • Ensure the CMM is calibrated and the probe is in good condition

  • Answered by AI
  • Q3. What is FMEA
  • Ans. 

    FMEA stands for Failure Mode and Effects Analysis. It is a systematic approach to identify and prevent potential failures in a process or product.

    • FMEA is used to identify potential failures in a process or product and their effects on the system.

    • It involves analyzing the likelihood of failure, severity of the consequences, and the ability to detect the failure before it occurs.

    • FMEA is commonly used in industries such a...

  • Answered by AI
  • Q4. How to do instrument selection
  • Ans. 

    Instrument selection involves identifying the appropriate tools and equipment for a specific task or process.

    • Identify the purpose of the instrument

    • Consider the accuracy and precision required

    • Evaluate the cost and availability

    • Ensure the instrument is compatible with other equipment

    • Consider the maintenance and calibration requirements

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Always have good knowledge for the things that you have added in your resume. Do not put anything that you don't know about.

Skills evaluated in this interview

Flash Viven Machining Technologies Interview FAQs

How many rounds are there in Flash Viven Machining Technologies Quality Inspector interview?
Flash Viven Machining Technologies interview process usually has 4 rounds. The most common rounds in the Flash Viven Machining Technologies interview process are Technical, HR and Group Discussion.
What are the top questions asked in Flash Viven Machining Technologies Quality Inspector interview?

Some of the top questions asked at the Flash Viven Machining Technologies Quality Inspector interview -

  1. Quality in process custo...read more
  2. 7 qc tools and equipm...read more

Tell us how to improve this page.

Flash Viven Machining Technologies Quality Inspector Salary
based on 17 salaries
₹1.4 L/yr - ₹3 L/yr
9% less than the average Quality Inspector Salary in India
View more details

Flash Viven Machining Technologies Quality Inspector Reviews and Ratings

based on 4 reviews

4.7/5

Rating in categories

4.3

Skill development

4.4

Work-life balance

4.4

Salary

3.8

Job security

4.9

Company culture

3.8

Promotions

3.8

Work satisfaction

Explore 4 Reviews and Ratings
Junior Engineer
148 salaries
unlock blur

₹1.8 L/yr - ₹4 L/yr

Quality Engineer
88 salaries
unlock blur

₹1.7 L/yr - ₹4.4 L/yr

Engineer
56 salaries
unlock blur

₹2.4 L/yr - ₹4.5 L/yr

Engineer Trainee
54 salaries
unlock blur

₹1.5 L/yr - ₹3.1 L/yr

Production Engineer
48 salaries
unlock blur

₹1.8 L/yr - ₹4.6 L/yr

Explore more salaries
Compare Flash Viven Machining Technologies with

JK Tyres

3.6
Compare

Faurecia

3.9
Compare

Hitachi Astemo

4.1
Compare

Valeo

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview