Filter interviews by
I applied via Naukri.com and was interviewed in Jul 2022. There were 2 interview rounds.
3-2-1 principle is a rule of thumb for backup and disaster recovery.
3 copies of data should be kept
2 copies should be stored on different storage media
1 copy should be stored offsite
Example: Keeping one copy on a local hard drive, one on a cloud storage, and one on an external hard drive stored in a different location.
Example: In case of a fire or flood, the offsite copy ensures data recovery.
1st and 3rd angle projection methods are used in engineering drawing to show the object from different perspectives.
1st angle projection is commonly used in Europe and Asia while 3rd angle projection is used in North America.
1st angle projection shows the object as if it is in front of the plane of projection while 3rd angle projection shows the object as if it is behind the plane of projection.
The choice of projection...
Formula to calculate density in Fluid Mechanics.
Density = Mass / Volume
Units of density are kg/m^3 or lb/ft^3
Density of water at 4°C is 1000 kg/m^3 or 62.4 lb/ft^3
Top trending discussions
posted on 24 Oct 2024
I applied via campus placement at MAEER's MIT College of Engineering, Pune and was interviewed in Apr 2024. There were 4 interview rounds.
Behavioural and aptitude-related questions/tests/games.
NAND gate is a digital logic gate that produces an output only when both inputs are low.
NAND gate is a fundamental building block in digital electronics.
It is the opposite of an AND gate, as it produces a low output when both inputs are high.
The output of a NAND gate is high (1) when any of the inputs are low (0).
NAND gates are commonly used in logic circuits, such as in computers and microcontrollers.
posted on 22 Oct 2024
I applied via LinkedIn and was interviewed in Sep 2024. There were 2 interview rounds.
All questions are good along with tricky
My final year project is a mobile application for tracking and managing personal finances.
Developing a user-friendly interface for inputting expenses and income
Implementing data visualization tools to track spending habits
Incorporating budgeting features to help users manage their finances effectively
posted on 22 Feb 2024
I applied via Campus Placement
I applied via Walk-in and was interviewed in Sep 2023. There was 1 interview round.
posted on 26 Dec 2022
I applied via Campus Placement
Mechanical Core Questions with simple aptitude questions
Industry relevant topic like IoT, EV
Points must be technical and from an engineer perspective.
Isometric part can be converted to 2D drawing with GD&T.
Isometric drawing shows the 3D view of the part, while 2D drawing shows the top, front, and side views.
GD&T (Geometric Dimensioning and Tolerancing) is used to specify the dimensions and tolerances of the part.
To convert isometric part to 2D drawing with GD&T, first create the top, front, and side views, then add the dimensions and tolerances using GD&T symbols.
Ex...
posted on 6 Jul 2023
I applied via campus placement at Shivaji University, Kolhapur and was interviewed in Aug 2022. There were 3 interview rounds.
Normal technical test based upon your majors
Design failure methods are techniques used to identify and prevent potential failures in engineering designs.
Failure Mode and Effects Analysis (FMEA) - systematic approach to identifying and preventing potential failure modes
Fault Tree Analysis (FTA) - graphical representation of potential failure modes and their causes
Root Cause Analysis (RCA) - method for identifying the underlying cause of a failure
Design of Experim...
posted on 21 Nov 2022
I applied via LinkedIn and was interviewed in Oct 2022. There were 3 interview rounds.
Design of a spring involves determining its parameters based on the application requirements.
The type of spring (compression, tension, torsion) must be chosen based on the application
The material of the spring must be selected based on the required strength and durability
The wire diameter, coil diameter, and number of coils must be determined based on the required spring rate and deflection
The ends of the spring must b...
posted on 18 Nov 2024
I applied via campus placement at College of Engineering ( Formerly Pune Instiute of Enginering and Technology ), Pune and was interviewed in May 2024. There were 3 interview rounds.
2 section one is domain related and other is gamified .
Some of the top questions asked at the FAITH AUTOMATION SYSTEMS & TOOLING Graduate Engineer Trainee (Get) interview -
Project Manager
18
salaries
| ₹7.5 L/yr - ₹16 L/yr |
Senior Design Engineer
18
salaries
| ₹4.2 L/yr - ₹9.5 L/yr |
Engineer
13
salaries
| ₹3 L/yr - ₹5.2 L/yr |
Senior Engineer
13
salaries
| ₹3 L/yr - ₹8.2 L/yr |
Simulator Engineer
10
salaries
| ₹2.5 L/yr - ₹9.1 L/yr |
BHEL
TCS
Larsen & Toubro Limited
Siemens