Add office photos
Filter interviews by
EW INSPECTION AND NDT NDT Technician L2 Interview Questions, Process, and Tips
EW INSPECTION AND NDT NDT Technician L2 Interview Experiences
1 interview found
Rajee Rajesh
Selected
I was interviewed in Dec 2024.
(5 Questions)
- Q1. What is NDT? NDT is Non Destructive Testing and one object no destructive to bend, cutting,to find the quality is called NDT method
- Ans.
NDT stands for Non Destructive Testing, a method used to evaluate the properties of a material, component, or system without causing damage.
NDT techniques include ultrasonic testing, radiography, magnetic particle testing, and visual inspection.
NDT is commonly used in industries such as aerospace, automotive, construction, and manufacturing.
The goal of NDT is to detect defects or irregularities in materials or structur...
- Q2. What are NDT method? UT,MT,RT,RTFI,PT,VT,ET
- Ans.
NDT methods are non-destructive testing techniques used to evaluate the properties of a material, component, or system without causing damage.
Ultrasonic Testing (UT) - uses high-frequency sound waves to detect internal flaws
Magnetic Particle Testing (MT) - uses magnetic fields to detect surface and near-surface flaws
Radiographic Testing (RT) - uses X-rays or gamma rays to inspect the internal structure of a component
Ra...
- Q3. NDT method which is very correctly finding Defects? RT and UT methods..
- Ans.
RT and UT methods are very effective in finding defects in materials.
Radiographic Testing (RT) is effective in detecting internal defects such as cracks, voids, inclusions, and other discontinuities in materials by using X-rays or gamma rays.
Ultrasonic Testing (UT) is also very accurate in finding defects by sending high-frequency sound waves into the material and analyzing the reflected waves to identify flaws like cr...
- Q4. What is UT? Ultra Sonic Test is UT, Object to enter the ultrasound defect side the sound reflection to aquatic impetince method is called UT
- Ans.
UT stands for Ultrasonic Testing, a non-destructive testing method that uses high frequency sound waves to detect internal flaws in materials.
UT uses high frequency sound waves to penetrate materials and detect internal flaws
The sound waves are reflected back to a receiver when they encounter a discontinuity or defect
The time taken for the sound waves to return can indicate the size and location of the defect
UT is comm...
- Q5. What is a DAC? Distance Amplitude Correction DAC do the Non planer defect used
- Ans.
DAC stands for Distance Amplitude Correction, a technique used in ultrasonic testing to correct amplitude variations caused by distance.
DAC is used in ultrasonic testing to correct amplitude variations caused by distance between the transducer and the reflector.
It involves adjusting the signal amplitude based on the distance traveled by the ultrasonic wave.
DAC helps in ensuring accurate flaw detection and sizing in mat...
Top trending discussions
Interview questions from similar companies
Anonymous
Selected
I was interviewed in Dec 2024.
(2 Questions)
- Q1. Technical network cable
- Q2. About climping
(2 Questions)
- Q1. About hardware and software
- Q2. About desktop computer
Interview Preparation Tips
john pradhan pradhan
Selected
I applied via Walk-in and was interviewed in May 2024. There were 2 interview rounds.
(3 Questions)
- Q1. If there Hazzard is occur so what should we do first
- Ans.
The first thing to do in case of a hazard is to ensure the safety of yourself and others.
Assess the situation to determine the nature and extent of the hazard.
Alert others in the vicinity about the hazard.
Follow safety protocols and procedures to mitigate the hazard.
Contact emergency services if necessary.
Evacuate the area if instructed to do so.
- Q2. What should you do when their is no EV
- Q3. Also the DG suddenly stopped
(2 Questions)
- Q1. What should u do when dg fuel dosnot passess through a enjector
- Ans.
Check for clogs in the fuel line, inspect the injector for damage, clean or replace the injector if necessary.
Inspect the fuel line for any clogs or blockages
Check the injector for any damage or malfunction
Clean the injector using appropriate tools and techniques
If cleaning doesn't work, consider replacing the injector
Ensure proper fuel flow and pressure to the injector
- Q2. How van we know earth leacage
- Ans.
Earth leakage can be detected using a residual current device (RCD) or ground fault circuit interrupter (GFCI).
Earth leakage can be detected by measuring the difference in current between the live and neutral wires in a circuit.
A residual current device (RCD) or ground fault circuit interrupter (GFCI) can be used to detect earth leakage and quickly disconnect the power supply to prevent electric shock.
Regular testing o...
Selected
I applied via Referral and was interviewed in May 2024. There was 1 interview round.
Write code to fetch version of all devices and upgrade
Interview Preparation Tips
Leethcode practice
TCP IP basic
DHCP DNS PING Traceroute
(2 Questions)
- Q1. Introduction reference
- Q2. Qualifications reference
Selected
I applied via AmbitionBox and was interviewed in Dec 2023. There was 1 interview round.
(2 Questions)
- Q1. Computer and software
- Q2. Series of programs, data and instructions used in a computer's hardware to help the device operate and you complete tasks. Hardware is the physical components that comprise a computer, such as the graphics...
- Ans.
Software is a collection of programs, data, and instructions that enable a computer to perform tasks.
Software is the intangible part of a computer system.
It includes operating systems, applications, and utilities.
Examples of software include Microsoft Windows, Adobe Photoshop, and Google Chrome.
Skills evaluated in this interview
afsal kh
Easy questions, not much to say
(1 Question)
- Q1. General questions. salary discussions. nothing much
Selected
I applied via Walk-in and was interviewed in Aug 2023. There were 3 interview rounds.
(4 Questions)
- Q1. What technical is
- Ans.
Yes I am iti fitter and electrical work experience 10 years
- Q2. Power cut working stop
- Ans.
Power cut no working stop on invator working start
- Q3. Short sircut mcb work
- Ans.
No mcb work on short sircut so short sir cut working Power on
- Q4. Power cut woking on benk
(4 Questions)
- Q1. Benk work good is
- Q2. Work on benk technical
- Q3. Power cut benking work
- Q4. Jow do benk working
Interview Preparation Tips
(1 Question)
- Q1. Some technical questions related to your field, if experience than related to
Paras Singh
I applied via campus placement at National Institute of Technology (NIT), Raipur
It was good and hectic
Focus on dsa and puzzles
(1 Question)
- Q1. Graphs trees maps hash
(1 Question)
- Q1. Coding problems
EW INSPECTION AND NDT Interview FAQs
Some of the top questions asked at the EW INSPECTION AND NDT NDT Technician L2 interview -
Tell us how to improve this page.
Interview Questions for Popular Designations
- NDT Technician Interview Questions
- Technician Interview Questions
- Electrical Technician Interview Questions
- NDT Engineer Interview Questions
- Lab Technician Interview Questions
- Mechanical Technician Interview Questions
- NDT Inspector Interview Questions
- Instrumentation Technician Interview Questions
- Show more
EW INSPECTION AND NDT NDT Technician L2 Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
|
Inspection Engineer
5
salaries
|  ₹7.2 L/yr - ₹10.4 L/yr |
|
Planning Engineer
4
salaries
| ₹6.7 L/yr - ₹12 L/yr |
|
Assistant Site Engineer
3
salaries
| ₹1.5 L/yr - ₹1.5 L/yr |
|
Third Party Inspection Engineer
3
salaries
| ₹5.1 L/yr - ₹5.1 L/yr |
TCS
Accenture
Wipro
Cognizant
- Home >
- Interviews >
- EW INSPECTION AND NDT Interview Questions >
- EW INSPECTION AND NDT NDT Technician L2 Interview Questions
