Upload Button Icon Add office photos

Eversendai

Compare button icon Compare button icon Compare

Filter interviews by

Eversendai Post Graduate Engineer Trainee [pget] Interview Questions and Answers

Updated 16 Jul 2022

Eversendai Post Graduate Engineer Trainee [pget] Interview Experiences

1 interview found

Round 1 - Technical 

(1 Question)

  • Q1. Questions were asked from the information written in on the resume

Interview Preparation Tips

Interview preparation tips for other job seekers - Make sure you know everything that written on your resume

Interview questions from similar companies

I applied via Campus Placement and was interviewed in Aug 2022. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. What is comprehensive strength of OPC Ans- comprehensive strength is ranging between 33-53 MPa at 28 days ,22-27 MPa at 7days , 16-27 MPa at 3 days of curing after casting
  • Ans. 

    Comprehensive strength of OPC ranges from 33-53 MPa at 28 days of curing after casting.

    • OPC has high compressive strength due to its chemical composition

    • It is commonly used in construction for its durability and strength

    • The strength of OPC increases with time and proper curing

    • Compressive strength is measured in MPa

    • OPC has a comprehensive strength ranging from 33-53 MPa at 28 days of curing after casting

  • Answered by AI
  • Q2. What is the waters absorption capacity of Coarse Aggregate Ans- 0.5-1 Percent
  • Ans. 

    The water absorption capacity of coarse aggregate is 0.5-1%.

    • Water absorption capacity is the amount of water that can be absorbed by the aggregate.

    • Coarse aggregates are larger than 4.75mm in size.

    • Water absorption capacity affects the strength and durability of concrete.

    • Examples of coarse aggregates include gravel, crushed stone, and slag.

  • Answered by AI
  • Q3. What is the width of highway (for 1line) Ans-3.75 m
  • Ans. 

    The width of a highway for one line is typically 3.75 meters.

    • The width of a highway can vary depending on the number of lanes and the location.

    • In the US, the standard width for a single lane highway is 3.7 meters.

    • In Europe, the standard width for a single lane highway is 3.5 meters.

    • The width of a highway is important for safety and traffic flow.

    • Wider highways can accommodate more traffic and reduce congestion.

  • Answered by AI
  • Q4. What is the special gravity of soil Ans -The specific gravity of soil particles lie within the range of 2.65-2.85
  • Ans. 

    The specific gravity of soil particles is the ratio of the weight of a given volume of soil to the weight of an equal volume of distilled water.

    • Specific gravity is an important property of soil that helps in determining its suitability for various engineering applications.

    • It is used to calculate the void ratio, porosity, and degree of saturation of soil.

    • The specific gravity of soil particles is affected by factors such...

  • Answered by AI
  • Q5. What are the most used type of support Ans- 1 Roller 2 pinned 3 fixed
  • Ans. 

    The most used types of support are roller, pinned, and fixed.

    • Roller supports allow for movement in one direction while restricting movement in other directions.

    • Pinned supports allow for rotation at the joint but restrict translation.

    • Fixed supports restrict both rotation and translation.

    • The type of support used depends on the specific engineering application.

    • For example, roller supports are commonly used in bridges to a...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Take care of yourself
Follow up on application
Focus on the employer need
Customize your resume and cover letter

I applied via Campus Placement and was interviewed in Nov 2021. There were 3 interview rounds.

Round 1 - Aptitude Test 

It was easy, just basic apti and technical

Round 2 - Technical 

(1 Question)

  • Q1. They asked basic Mechanical engineering questions and about project s
Round 3 - Extempore 

(1 Question)

  • Q1. They asked to share your views about Covid impact on economy of India and world. Then they did counter questions on my views.

Interview Preparation Tips

Interview preparation tips for other job seekers - Recruitment process is good but slow in online mode.

I applied via Campus Placement and was interviewed in Oct 2021. There were 2 interview rounds.

Round 1 - HR 

(3 Questions)

  • Q1. What is your family background?
  • Q2. Tell me about yourself.
  • Q3. Are you willing to relocate?Aren't you interested in Ph.d after M.tech
  • Ans. Yes.Willing to relocate anywhere.I believe masters is an ample sufficient higher education to get into industry and I feel I gained sufficient knowledge in my masters and looking forward to apply the knowledge in industry.
  • Answered Anonymously
Round 2 - Technical 

(1 Question)

  • Q1. As I mentioned in resume I attended various short term courses they asked me about what I learnt in short term courses.I mentioned spectroscopy.I was immediately asked if it's possible to find out gasses d...
  • Ans. My answer is yes it's possible using mass electroscopy
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - All you need to clear interview is some basics and good communicable english.Apart from these a person must be confident and should have belief in himself so that other who are interviewing him can believe him

I was interviewed in Aug 2020.

Interview Questionnaire 

1 Question

  • Q1. Technically, troubleshooting

Interview Preparation Tips

Interview preparation tips for other job seekers - Be practical and tech knowledge love your work

Interview Questionnaire 

1 Question

  • Q1. Technical questions related to inventory,scm and stock management

Interview Preparation Tips

Round: Resume Shortlist
Experience: Experience and key skills

I was interviewed before Jul 2016.

Interview Preparation Tips

Round: Resume Shortlist
Experience: Face to Face interview me
Tips: He asked me why did coming here i told this is a big company growth is here

Skills: Talking Ability

Interview Questionnaire 

1 Question

  • Q1. About Yourself

Interview Preparation Tips

Round: Test
Experience: Test level was medium, as i also sat for mahindra, i found L&T test was harder than mahindra!
Tips: Just study RS agarwal

Round: Group Discussion
Experience: It was easy for me, coz i was aware about tips of GD
Tips: Be the leader, if possibleTalk in between, even if u dont know topic much
Duration: 20 minutes

Round: Interview
Experience: This question was damn easy for me, coz i can talk more based on my activities & resume
Tips: Dont hesitate, stay calm & describe yourself, but not family background

General Tips: Be yourself, no technical knowledge is required(depends on panel u get)
Skill Tips: ""
College Name: IIT Roorkee
Motivation: To get placed!

I applied via PLACEMENT

Interview Preparation Tips

Round: Technical Interview
Experience: Good detailed interview in terms of technical knowledge
Tips: Should be thorough with the projects you have done during the course

General Tips: be confident of what you put in your resume
Technical knowledge regarding projects undertaken during engineering should be sound
Be confident
Skills: Communication, Thinking capability, knowledge applying capability
College Name: V.E.S Institute Of Technology
Motivation: Opportunity to work in a renowned and core technical company
Funny Moments: We consider the interview panelists to be as tough as our viva externals. Interviewers are mostly on your side(contrary to viva professors :P)

I was interviewed before Sep 2016.

Interview Questionnaire 

1 Question

  • Q1. Ocampo, basic electronics and C

Interview Preparation Tips

Round: Test
Duration: 1 hour
Total Questions: 50

Skills: Embedded Systems, C Programming
College Name: Sahyadri college of engineering

Eversendai Interview FAQs

How many rounds are there in Eversendai Post Graduate Engineer Trainee [pget] interview?
Eversendai interview process usually has 1 rounds. The most common rounds in the Eversendai interview process are Technical.

Tell us how to improve this page.

Interview Questions from Similar Companies

Tata Group Interview Questions
4.2
 • 358 Interviews
Saint-Gobain Interview Questions
4.0
 • 172 Interviews
AECOM Interview Questions
4.2
 • 115 Interviews
BHEL Interview Questions
4.1
 • 113 Interviews
Worley Interview Questions
4.1
 • 111 Interviews
AtkinsRealis Interview Questions
4.0
 • 87 Interviews
View all
Assistant Engineer
61 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
55 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
45 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
38 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

HSE Engineer
29 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Eversendai with

Larsen & Toubro Limited

4.0
Compare

Tata Group

4.2
Compare

BHEL

4.1
Compare

Reliance Industries

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview