Upload Button Icon Add office photos

Filter interviews by

Esteem Projects Quality Inspection Trainee Interview Questions and Answers

Updated 1 May 2023

Esteem Projects Quality Inspection Trainee Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. What are the basics of polymers?
  • Ans. 

    Polymers are large molecules made up of repeating units called monomers.

    • Polymers can be natural or synthetic

    • Examples of natural polymers include proteins, DNA, and cellulose

    • Examples of synthetic polymers include plastics, nylon, and rubber

    • Polymers have unique properties such as flexibility, strength, and durability

    • Polymerization is the process of joining monomers together to form a polymer

  • Answered by AI
  • Q2. What is your field of interest

Interview Preparation Tips

Interview preparation tips for other job seekers - Be always prepared

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Jul 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Drawing Reading
  • Q2. What is GD And T in drawing
  • Ans. 

    GD&T stands for Geometric Dimensioning and Tolerancing, a system for defining and communicating engineering tolerances on drawings.

    • GD&T is a symbolic language used on engineering drawings to specify the allowable variations in form, size, and orientation of features.

    • It uses symbols, such as squares, circles, and triangles, to define the tolerance zones for features on a part.

    • GD&T helps ensure that parts are manufacture...

  • Answered by AI

I applied via Placement agency and was interviewed in Dec 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Some questions from QMS. Some questions from inprocess machining inspection
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Jan 2023. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. Introduction and core job responsibilities in current organisation.
  • Q2. Expectation Salary
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Jun 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Basic introduction about yourself and previous company
Round 3 - Technical 

(1 Question)

  • Q1. Technical questions from qa and last work in previous company

I applied via Other and was interviewed in Mar 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. HR: Can you join at Pune? Do you know AutoCad? Our interviewer is not available today (after fixing date and time, and after reaching Pune for an interview).
  • Ans. To HR: Yes, can join at Pune. I dont know autocad, its already clear in my CV, hope you saw it. Pl. advise, who will conduct in absense of the interviewer.
  • Answered by RAJ
  • Q2. Another Interviewer (quite junior to me): We will forward your CV to our management and will inform you (waiting since 6 months).

Interview Preparation Tips

Interview preparation tips for other job seekers - I don't know how such companies get ISO certifications, where HR manages from mails only, no formal email, improper guidance.
The interviewer was absent on the particular day, no written, verbal information about it. No guilt feelings. Another guy quite 15 years junior to me conducted the formal interview.
Neither HR nor any responsible authority goes thro any CV, without knowing details of the candidate prior to calling the candidate, and ask questions, which reflects quite pathetic culture of the organisation.
Example:
1. I am not Engineering graduate, still they call and tell, you are not from engineering discipline.
2. I don't know Autocad and not even mentioned in my CV, still they ask, do you know Autocad? What to do with such guys, to laugh at or cry?
3. No value of time, no respect for the candidate, I reached well in time at 11.30 a.m., all the way from Mumbai. I was kept waited till 3.30 p.m. Later I had to tell them, when will the interview be taken? Ohh, that time they realised, they have called a guy for interview, and simply say, our interviewer is absent today... again, to laugh or cry?
On a serious note, interviewers are company representatives, should value others and their time too, it should be well organised. Perfection does not come by getting ISO certification, it should be inherent in the company culture.

I applied via Naukri.com and was interviewed in Apr 2021. There were 3 interview rounds.

Interview Questionnaire 

6 Questions

  • Q1. About you and your family
  • Q2. What your responsibility your current company
  • Q3. GD&T , Kaizen
  • Q4. 7Qc tools ,poka- toka ,5S ,PPAP ,SPC
  • Q5. What is Quality ?
  • Ans. 

    Quality is the degree of excellence of a product or service that meets or exceeds customer expectations.

    • Quality is meeting or exceeding customer expectations

    • It involves consistency, reliability, and durability

    • Quality can be measured through various metrics such as defect rate, customer satisfaction, and on-time delivery

    • Quality is a continuous process that involves identifying and addressing defects and improving proces...

  • Answered by AI
  • Q6. What is Layout ?
  • Ans. 

    Layout refers to the arrangement of elements on a page or screen.

    • Layout is important in design to ensure visual hierarchy and readability.

    • It involves organizing elements such as text, images, and whitespace.

    • Examples of layout include website design, magazine spreads, and product packaging.

    • Good layout should be aesthetically pleasing and functional.

    • Layout can also refer to the physical arrangement of components in a cir

  • Answered by AI

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(3 Questions)

  • Q1. Introduction of yourself
  • Q2. Daily work routine & Responsibility
  • Q3. Technical questions regarding Job profile

Interview Preparation Tips

Interview preparation tips for other job seekers - Currently they are not not taking employees on company payroll they offering one year contractual employment which is extendable if your performance are good or as per company requirements.

I applied via Recruitment Consultant and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Previous company work experience
  • Q2. Plans in next 5 years
  • Ans. 

    I plan to continue developing my technical skills and taking on leadership roles within the company.

    • Pursue advanced technical certifications

    • Lead cross-functional teams on complex projects

    • Mentor junior engineers

    • Explore opportunities for innovation and process improvement

    • Collaborate with senior management to set strategic goals

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was ok. But the local management is horrible. Don't join expecting MNC standard.Even a startup might be better than this company. It's a family owned business by the manager. Not MNC
Interview experience
3
Average
Difficulty level
-
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Sep 2023.

Round 1 - Aptitude Test 

Some basic questions related to mechanical engineering syllabus

Round 2 - Technical 

(1 Question)

  • Q1. Basic questions like difference between two stroke and four stroke engine etc

Esteem Projects Interview FAQs

How many rounds are there in Esteem Projects Quality Inspection Trainee interview?
Esteem Projects interview process usually has 2 rounds. The most common rounds in the Esteem Projects interview process are Resume Shortlist and One-on-one Round.

Tell us how to improve this page.

Esteem Projects Quality Inspection Trainee Interview Process

based on 1 interview

Interview experience

3
  
Average
View more

Interview Questions from Similar Companies

Europa Locks Interview Questions
3.6
 • 20 Interviews
PMT Machines Interview Questions
3.3
 • 19 Interviews
Trelleborg Interview Questions
3.9
 • 18 Interviews
MITA Interview Questions
3.7
 • 14 Interviews
D.B ENGINEERING Interview Questions
4.2
 • 11 Interviews
View all
Mechanical Engineer
19 salaries
unlock blur

₹3.3 L/yr - ₹6 L/yr

Production Engineer
8 salaries
unlock blur

₹3 L/yr - ₹4.1 L/yr

Project Engineer
8 salaries
unlock blur

₹6.4 L/yr - ₹8.9 L/yr

Senior Engineer Mechanical
7 salaries
unlock blur

₹6.5 L/yr - ₹7.2 L/yr

Design Engineer
7 salaries
unlock blur

₹3 L/yr - ₹6 L/yr

Explore more salaries
Compare Esteem Projects with

Europa Locks

3.6
Compare

Trelleborg

4.0
Compare

Case New-Holland Construction Equipment India

4.0
Compare

Tokai Rubber Auto Parts India

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview