Egis India Consulting Engineers Electrical GET Interview Questions and Answers

MCQs type written test

120 eligible freshers were distributed in groups of 8 each for GDs with all getting seperate topics.

Q1. Questions on Electricity Distribution Systems in general.
Add your answer
Q2. Question regarding my final year project
Add your answer

30 min test of core questions and some apptitude

Aptitude was a little bit easy. Keep your foundation strong.

Q1. Why do you want to join our company?
Add your answer
Q2. Are you ready to relocate anywhere?
Add your answer

Hard but medium not very easy but not so hard

Q1. M15 ratio? In construction
Ans. 
M15 ratio is the mix ratio of cement, sand, and aggregate in construction.
• M15 ratio is commonly used in construction for preparing concrete.

• It refers to the mix ratio of 1:2:4, which means 1 part cement, 2 parts sand, and 4 parts aggregate.

• This ratio is suitable for general construction purposes where high strength is not required.
Answered by AI
Add your answer
Q2. Initial setting time of rhc?
Ans. 
Initial setting time of rhc is the time taken for the cement paste to lose its plasticity and become rigid.
• Initial setting time is typically around 30 minutes for ordinary Portland cement.

• It is influenced by factors such as temperature, water-cement ratio, and type of cement used.

• Testing for initial setting time is done using the Vicat apparatus.
Answered by AI
Add your answer

Q1. Why should we hire you?
Add your answer
Q2. Why you want this job?
Add your answer

Normal SubPar Questions

Q1. Explain working of Transformer
Ans. 
A transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction.
• Transformers work on the principle of electromagnetic induction

• They have primary and secondary coils wound around a core

• Step-up transformers increase voltage while step-down transformers decrease voltage

• Efficiency of a transformer is determined by its core material and design
Answered by AI
Add your answer
Q2. Explain working of Synchronous Motor
Ans. 
Synchronous motor is a type of AC motor where the rotation of the shaft is synchronized with the frequency of the supply current.
• Synchronous motor has a rotor with electromagnets and stator with field windings.

• The rotor rotates at the same speed as the rotating magnetic field produced by the stator.

• It requires DC excitation to create a magnetic field in the rotor.

• Used in applications where constant speed is required, s
Answered by AI
Add your answer
Q3. Explain method of Torque Variation of Squirrel Cage Motor.
Ans. 
Torque variation in squirrel cage motors is achieved by changing the rotor resistance.
• Torque in squirrel cage motors can be varied by changing the rotor resistance.

• Increasing the rotor resistance will increase the torque produced by the motor.

• Decreasing the rotor resistance will decrease the torque produced by the motor.

• This method is commonly used in applications where variable torque is required, such as in fans or p
Answered by AI
Add your answer
Q4. Multiple questions on Slip of Induction Motor
Add your answer
Q5. Speed and Torque Variation Methods
Ans. 
Speed and torque variation methods are used in electrical systems to control the performance of motors.
• Speed variation methods include changing the frequency of the power supply or using variable speed drives.

• Torque variation methods involve adjusting the voltage or current supplied to the motor.

• Examples of speed variation methods include VFDs (Variable Frequency Drives) and soft starters.

• Examples of torque variation m...read more
Answered by AI
Add your answer

English and basic maths

Q1. Basics of electrical (which ever field you are from) working principle of machines, basic definition of resistance, is it good or bad ?
Add your answer
Q2. Definitions of resistance, machines
Ans. 
Resistance is the opposition to the flow of electric current, while machines are devices that convert energy from one form to another.
• Resistance is measured in ohms and is caused by the material and dimensions of a conductor.

• Machines include motors, generators, transformers, and other devices that use electrical energy to perform work.

• Resistance can be calculated using Ohm's Law: R = V/I, where R is resistance, V is vo
Answered by AI
Add your answer
Q3. Working principle of machines
Ans. 
Machines operate based on various principles such as electromagnetic, mechanical, thermal, and chemical principles.
• Machines convert one form of energy into another to perform work

• Electromagnetic machines use the principles of electricity and magnetism, like motors and generators

• Mechanical machines use moving parts to transfer and transform energy, like engines and gears

• Thermal machines use heat to generate power, like ...read more
Answered by AI
Add your answer
Q4. Challenges in electrical industry
Ans. 
Challenges in electrical industry include rapid technological advancements, safety concerns, and skilled labor shortage.
• Rapid technological advancements leading to constant need for upskilling and training

• Safety concerns related to electrical hazards and compliance with regulations

• Skilled labor shortage impacting project timelines and quality of work

• Integration of renewable energy sources and smart grid technologies
Answered by AI
Add your answer

Q1. About you, impromptu on any topic for 2 mins
Add your answer

Current affairs on farmers protest

Mathematics ang general aptitude

General aptitude as well as subject related question

Q1. Favourite subject questions
Add your answer