Add office photos
Filter interviews by
Ecstatic Engineering Consultants CAD Technician Interview Questions and Answers
Ecstatic Engineering Consultants CAD Technician Interview Experiences
1 interview found
Anonymous
Interview Questionnaire
4 Questions
- Q1. What is CTB?
- Ans.
CTB stands for Color Table File. It is a file format used in CAD software to define the colors and line weights of plotted objects.
CTB files are used in AutoCAD and other CAD software.
They define the color and line weight of plotted objects based on the assigned color index.
CTB files are often used in conjunction with DWG files to ensure consistent plotting.
They can be customized to create unique color schemes and line...
- Q2. Knowledge about CTB...
- Q3. Span arrangements of MNB, ROB,
- Ans.
MNB and ROB are bridge types with different span arrangements.
MNB (Multi-Beam Network) bridges typically have equal spans between beams.
ROB (Road Over Bridge) bridges can have varying span arrangements depending on the road and railway alignment.
Span arrangements for both bridge types can be determined based on factors such as traffic volume, load capacity, and site conditions.
- Q4. Type of girder
- Ans.
A girder is a large and horizontal support beam that is used in construction to support heavy loads.
Girders can be made of various materials such as steel, concrete, or wood.
The type of girder used depends on the load it needs to support and the span it needs to cover.
Examples of girder types include I-beams, box girders, and truss girders.
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Selected
I was interviewed in Dec 2024.
(2 Questions)
- Q1. Technical network cable
- Q2. About climping
(2 Questions)
- Q1. About hardware and software
- Q2. About desktop computer
Interview Preparation Tips
john pradhan pradhan
Selected
I applied via Walk-in and was interviewed in May 2024. There were 2 interview rounds.
(3 Questions)
- Q1. If there Hazzard is occur so what should we do first
- Ans.
The first thing to do in case of a hazard is to ensure the safety of yourself and others.
Assess the situation to determine the nature and extent of the hazard.
Alert others in the vicinity about the hazard.
Follow safety protocols and procedures to mitigate the hazard.
Contact emergency services if necessary.
Evacuate the area if instructed to do so.
- Q2. What should you do when their is no EV
- Q3. Also the DG suddenly stopped
(2 Questions)
- Q1. What should u do when dg fuel dosnot passess through a enjector
- Ans.
Check for clogs in the fuel line, inspect the injector for damage, clean or replace the injector if necessary.
Inspect the fuel line for any clogs or blockages
Check the injector for any damage or malfunction
Clean the injector using appropriate tools and techniques
If cleaning doesn't work, consider replacing the injector
Ensure proper fuel flow and pressure to the injector
- Q2. How van we know earth leacage
- Ans.
Earth leakage can be detected using a residual current device (RCD) or ground fault circuit interrupter (GFCI).
Earth leakage can be detected by measuring the difference in current between the live and neutral wires in a circuit.
A residual current device (RCD) or ground fault circuit interrupter (GFCI) can be used to detect earth leakage and quickly disconnect the power supply to prevent electric shock.
Regular testing o...
(2 Questions)
- Q1. Introduction reference
- Q2. Qualifications reference
Pramod Gouda
(1 Question)
- Q1. What is tolerance?
- Ans.
Tolerance in Auto CAD refers to the allowable deviation from a specified dimension.
Tolerance is the acceptable range of variation in a dimension or measurement.
It ensures that parts fit together properly during assembly.
Tolerance can be specified as a plus/minus value or a range of values.
For example, a hole may have a diameter of 10mm with a tolerance of +/- 0.1mm.
Tolerance helps ensure the functionality and quality o
Interview Preparation Tips
Selected
I applied via AmbitionBox and was interviewed in Dec 2023. There was 1 interview round.
(2 Questions)
- Q1. Computer and software
- Q2. Series of programs, data and instructions used in a computer's hardware to help the device operate and you complete tasks. Hardware is the physical components that comprise a computer, such as the graphics...
- Ans.
Software is a collection of programs, data, and instructions that enable a computer to perform tasks.
Software is the intangible part of a computer system.
It includes operating systems, applications, and utilities.
Examples of software include Microsoft Windows, Adobe Photoshop, and Google Chrome.
Skills evaluated in this interview
afsal kh
Easy questions, not much to say
(1 Question)
- Q1. General questions. salary discussions. nothing much
Selected
I applied via Walk-in and was interviewed in Aug 2023. There were 3 interview rounds.
(4 Questions)
- Q1. What technical is
- Ans.
Yes I am iti fitter and electrical work experience 10 years
- Q2. Power cut working stop
- Ans.
Power cut no working stop on invator working start
- Q3. Short sircut mcb work
- Ans.
No mcb work on short sircut so short sir cut working Power on
- Q4. Power cut woking on benk
(4 Questions)
- Q1. Benk work good is
- Q2. Work on benk technical
- Q3. Power cut benking work
- Q4. Jow do benk working
Interview Preparation Tips
Harish Kumar
Java, Sring Boot, JPA, Oracle, Java1.8
(4 Questions)
- Q1. NA, NA, NA, NA, Na
- Q2. NA, NA, NA, NA, NANanana
- Q3. Na, Na, Na, Na .,Na
- Q4. NANANANANN NANANA NA NA AN
(1 Question)
- Q1. Some technical questions related to your field, if experience than related to
Ecstatic Engineering Consultants Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
Interview Questions from Similar Companies
Ecstatic Engineering Consultants CAD Technician Reviews and Ratings
based on 1 review
Rating in categories
|
Bridge Design Engineer
7
salaries
|  ₹2.5 L/yr - ₹5 L/yr |
|
Mechanical Designer
3
salaries
| ₹2.8 L/yr - ₹2.8 L/yr |
|
Assistant Bridge Design Engineer
3
salaries
| ₹3 L/yr - ₹8 L/yr |
TCS
Accenture
Wipro
Cognizant
- Home >
- Interviews >
- Ecstatic Engineering Consultants Interview Questions >
- Ecstatic Engineering Consultants CAD Technician Interview Questions
