Upload Button Icon Add office photos

Filter interviews by

Desai Electronics Mechanical Engg. Design Interview Questions and Answers

Updated 27 Sep 2021

Desai Electronics Mechanical Engg. Design Interview Experiences

1 interview found

Interview Questionnaire 

1 Question

  • Q1. About creo 4.0 questions were asked

Interview Preparation Tips

Interview preparation tips for other job seekers - It's lasted for 2 hours in which they asked me for 3d modeling and pI was done and later they selected me on the basis of my performance

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Apr 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. Make sheet metal drawing in solid works & auto cad software
  • Ans. 

    Sheet metal drawings can be created in SolidWorks and AutoCAD software.

    • Start by creating a 2D sketch of the sheet metal part in either software.

    • Use tools like extrude, cut, and bend to create the 3D model of the part.

    • Add dimensions, tolerances, and annotations to the drawing for manufacturing.

    • Export the drawing in the required file format for fabrication.

    • Check for any errors or interferences before finalizing the desig

  • Answered by AI
  • Q2. 1 & 3rd angle projection
  • Q3. List count for Vernier caliper
  • Ans. 

    The count for Vernier caliper is the number of divisions on the Vernier scale that coincide with the main scale divisions.

    • The count for Vernier caliper is typically 10 or 20 divisions on the Vernier scale.

    • The count is used to improve the precision of measurements by allowing for readings between the main scale divisions.

    • For example, if the count is 10, each division on the Vernier scale represents 0.1 mm on the main sc

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic knowledge for software like Auto cad & Solid Edge
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Apr 2024. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Explain about all over engineering journey.
  • Ans. 

    My engineering journey has been filled with challenges, growth, and exciting opportunities.

    • Started with a strong foundation in math and science

    • Studied mechanical engineering in college, learning about design principles and materials

    • Gained hands-on experience through internships and projects

    • Continued learning and adapting to new technologies and industry trends

    • Currently applying my skills in a professional setting, work

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. Details about family background?
Round 3 - Design Test 

(1 Question)

  • Q1. 2 product provide which has design in AutoCAD 2d and solidwork.

Interview Preparation Tips

Interview preparation tips for other job seekers - Mainly focus about your design skills
Round 1 - Technical 

(1 Question)

  • Q1. Java data structure related question

Interview Preparation Tips

Interview preparation tips for other job seekers - prepare algorithm and basic java question
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Basics of Opps virtual functions , destructor
  • Q2. Basics of MFC and its structure
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Feb 2023. There were 2 interview rounds.

Round 1 - Technical 

(4 Questions)

  • Q1. Related to power electronics
  • Q2. What is rectifier
  • Ans. 

    A rectifier is an electrical device that converts alternating current (AC) to direct current (DC).

    • Rectifiers are commonly used in power supplies to convert AC voltage to DC voltage.

    • They are made up of diodes, which allow current to flow in only one direction.

    • Rectifiers can be half-wave or full-wave, depending on the number of diodes used.

    • Examples of rectifiers include bridge rectifiers, vacuum tube rectifiers, and soli

  • Answered by AI
  • Q3. What is scr and how it work
  • Ans. 

    SCR stands for Selective Catalytic Reduction. It is a technology used to reduce nitrogen oxide emissions from diesel engines.

    • SCR is a process that uses a catalyst to convert nitrogen oxides (NOx) into nitrogen (N2) and water (H2O).

    • It involves injecting a urea-based solution, known as diesel exhaust fluid (DEF), into the exhaust stream.

    • The DEF reacts with the NOx in the presence of the catalyst, breaking it down into ha...

  • Answered by AI
  • Q4. What is ups and it work
Round 2 - HR 

(1 Question)

  • Q1. General question

Interview Preparation Tips

Interview preparation tips for other job seekers - Ok to work but facilities are zero

Skills evaluated in this interview

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Total questions - 5
Quantitative, Logical Reasoning and English

Interview experience
1
Bad
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Jun 2024. There was 1 interview round.

Round 1 - Coding Test 

.net coding and pseudo coding

Interview Preparation Tips

Interview preparation tips for other job seekers - Many invisible terms and conditions and repeated questions.
Asking questions and new conditions without any hesitation how other experienced person will react.
Like asking to reject current offer, 2 years bond for senior role???.
I was thinking to drop the process, but hopefully red signal came from their end.
It feels same work environment of Chinese, Japanese and Taiwan companies, like strict hours, 5 Days office etc.
Not sure they aware of AI copilot, which does 80% of coding in few minutes, manual software development and man power will be gone soon.
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Apr 2023. There were 3 interview rounds.

Round 1 - Technical 

(4 Questions)

  • Q1. Teamcenter Architecture?
  • Q2. Dispatcher function?
  • Ans. 

    Dispatcher function is responsible for managing and coordinating tasks or requests within a system.

    • Coordinates tasks or requests to appropriate resources

    • Prioritizes tasks based on urgency or importance

    • Tracks progress and updates stakeholders

    • Handles incoming requests and assigns them to available resources

    • Examples: task scheduler in an operating system, job dispatcher in a computing cluster

  • Answered by AI
  • Q3. Steps of cloning?
  • Ans. 

    Cloning involves the process of creating a genetically identical copy of an organism.

    • Isolate the DNA from the organism to be cloned

    • Insert the DNA into a vector, such as a plasmid

    • Introduce the vector into a host cell, such as a bacteria or yeast

    • Allow the host cell to replicate, creating multiple copies of the DNA

    • Grow the host cell into a full organism with the same genetic makeup as the original

  • Answered by AI
  • Q4. Workflow designer?
Round 2 - Technical 

(2 Questions)

  • Q1. Area of expertise?
  • Q2. Steps to resolve a problem?
  • Ans. 

    Identify, analyze, brainstorm solutions, implement, evaluate, and document.

    • Identify the problem by gathering information and understanding the root cause.

    • Analyze the problem to determine the best course of action.

    • Brainstorm potential solutions with team members or stakeholders.

    • Implement the chosen solution and monitor its effectiveness.

    • Evaluate the outcome to ensure the problem is resolved and document the process for

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. Ready to reallocate?
  • Ans. 

    Yes, I am ready to reallocate for the right opportunity.

    • I am open to relocating for the right job opportunity that aligns with my career goals.

    • I have experience moving for previous roles and am comfortable with the process.

    • I understand the benefits of relocating, such as new experiences and career growth.

  • Answered by AI
  • Q2. Salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Read your resume well.

Skills evaluated in this interview

Software Developer Interview Questions & Answers

Tektronix user image Bhargav Jayanth Natekar

posted on 24 Mar 2023

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Sep 2022. There were 4 interview rounds.

Round 1 - Coding Test 

Basics of electronics and two coding questions

Round 2 - Technical 

(1 Question)

  • Q1. Basic of DSA,OS,OOPS
Round 3 - Technical 

(1 Question)

  • Q1. About ur projects and basic knowledge
Round 4 - HR 

(1 Question)

  • Q1. About family and general discussions

Interview Preparation Tips

Interview preparation tips for other job seekers - Just get to know about companys product and study basic electronics to impress them

Tell us how to improve this page.

Production Engineer
12 salaries
unlock blur

₹1.5 L/yr - ₹4 L/yr

Electrical Maintenance Engineer
9 salaries
unlock blur

₹2.8 L/yr - ₹3.5 L/yr

Maintenance Engineer
9 salaries
unlock blur

₹1.8 L/yr - ₹4 L/yr

Electronics Maintenance Engineer
7 salaries
unlock blur

₹2.5 L/yr - ₹3.2 L/yr

Design Engineer
7 salaries
unlock blur

₹1.8 L/yr - ₹3.5 L/yr

Explore more salaries
Compare Desai Electronics with

JBS Enterprises

3.2
Compare

Essae Digitronics

3.9
Compare

La-Gajjar Machineries

4.0
Compare

East India Technologies

2.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview