Upload Button Icon Add office photos

Deepak Phenolics

Compare button icon Compare button icon Compare

Filter interviews by

Deepak Phenolics Apprenticeship Trainee Interview Questions and Answers

Updated 14 Feb 2024

Deepak Phenolics Apprenticeship Trainee Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Feb 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What are the different types of compressors
  • Ans. 

    There are several types of compressors including reciprocating, rotary, centrifugal, and axial compressors.

    • Reciprocating compressors use a piston to compress the gas.

    • Rotary compressors use rotating impellers or screws to compress the gas.

    • Centrifugal compressors use a rotating impeller to accelerate the gas and then convert the kinetic energy into pressure.

    • Axial compressors use a series of rotating and stationary blades...

  • Answered by AI
  • Q2. What is the role of a crank shaft
  • Ans. 

    The crankshaft is a mechanical component in an engine that converts the reciprocating motion of the pistons into rotational motion.

    • The crankshaft is located in the engine block and is connected to the pistons via connecting rods.

    • As the pistons move up and down, the connecting rods transfer this motion to the crankshaft.

    • The crankshaft then converts this linear motion into rotational motion, which is used to drive other ...

  • Answered by AI
  • Q3. What do you understand by the word Entropy
  • Ans. 

    Entropy is a measure of disorder or randomness in a system.

    • Entropy is a concept in thermodynamics and information theory.

    • In thermodynamics, entropy is a measure of the unavailability of a system's energy to do work.

    • Entropy increases in isolated systems over time, leading to a state of maximum disorder or equilibrium.

    • In information theory, entropy is a measure of the uncertainty or randomness in a set of data.

    • For exampl...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - be thorough with the basics of your field of study

Interview questions from similar companies

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. Where do you see yourself in 5 years?
  • Q2. What are your strengths and weaknesses?
  • Q3. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - He confident and being honest.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Technical for 1 hour

Round 2 - One-on-one 

(1 Question)

  • Q1. Bernoulli's equation and its interpretation.
  • Ans. 

    Bernoulli's equation relates the pressure, velocity, and elevation of a fluid in a steady flow.

    • Describes the conservation of energy in a fluid flow system

    • Equation: P + 0.5 * rho * v^2 + rho * g * h = constant

    • Pressure, velocity, and elevation terms are related in the equation

    • Used in various engineering applications such as fluid dynamics and aerodynamics

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Oct 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Basics of instrumentation, control system, field instrumentation, job role
Round 3 - Technical 

(1 Question)

  • Q1. Overall plant proceess, job role, manpower handling and budget
Round 4 - HR 

(1 Question)

  • Q1. Family background and reason for chamge
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(4 Questions)

  • Q1. What Is GMAW ?
  • Ans. 

    GMAW stands for Gas Metal Arc Welding, a welding process that uses a continuous solid wire electrode and shielding gas to create a weld.

    • Uses a continuous solid wire electrode

    • Requires a shielding gas to protect the weld from atmospheric contamination

    • Commonly used in industries like automotive, construction, and manufacturing

  • Answered by AI
  • Q2. What are different between MIG & MAG ?
  • Ans. 

    MIG stands for Metal Inert Gas welding, while MAG stands for Metal Active Gas welding. The main difference lies in the type of shielding gas used.

    • MIG welding uses inert gases like argon or helium to shield the weld pool from atmospheric contamination, while MAG welding uses active gases like carbon dioxide or a mixture of gases.

    • MIG welding is typically used for non-ferrous metals like aluminum, while MAG welding is mor...

  • Answered by AI
  • Q3. What is WPS Procee ?
  • Ans. 

    WPS Procee is a welding procedure specification that outlines the details of a specific welding process.

    • WPS Procee includes information such as welding materials, welding parameters, preheat and post-weld heat treatment requirements.

    • It is essential for ensuring consistency and quality in welding operations.

    • WPS Procee is often required in industries such as construction, manufacturing, and oil & gas.

    • Example: A WPS Proce...

  • Answered by AI
  • Q4. What is PQR Process ?
  • Ans. 

    PQR Process is a procedure used in welding to qualify the welding procedure specification.

    • PQR stands for Procedure Qualification Record.

    • It involves testing and documenting the variables used during the welding process.

    • The purpose is to ensure that the welding procedure will produce the desired quality of welds.

    • PQR Process is essential for ensuring the integrity and strength of welded joints.

    • Examples of variables tested...

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. Tell about yourself.
  • Ans. 

    Experienced Senior Engineer with a strong background in software development and project management.

    • Over 10 years of experience in software engineering

    • Proficient in multiple programming languages such as Java, Python, and C++

    • Led successful projects from conception to completion, resulting in increased efficiency and cost savings

    • Strong problem-solving skills and ability to work well in a team environment

  • Answered by AI
  • Q2. Why you want to switch your job .
  • Ans. 

    Seeking new challenges and opportunities for growth.

    • Looking for a new environment to learn and develop new skills.

    • Interested in working on different projects to broaden my experience.

    • Seeking a company with better career advancement opportunities.

    • Want to explore new technologies and methodologies in the industry.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep attached with naukri.com .

I applied via Walk-in

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. What is your family background?
  • Q2. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - Best knowledgeable strike interview
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Apr 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Previous company work related

I applied via Referral and was interviewed before Jan 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Types of valves, mechanical seal, steam trap
  • Ans. 

    Types of valves, mechanical seal, steam trap

    • Types of valves: gate valve, globe valve, ball valve, butterfly valve

    • Mechanical seal: used to prevent leakage in pumps and other rotating equipment

    • Steam trap: used to remove condensate and non-condensable gases from steam systems

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep basics clear of mechanical engineering

I applied via Naukri.com and was interviewed in Jan 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. Types of material of reactor
  • Ans. 

    Reactors can be made of various materials depending on the application and requirements.

    • Common materials include stainless steel, carbon steel, and titanium.

    • Reactor linings can be made of glass, ceramic, or polymer materials.

    • Materials must be chosen based on factors such as temperature, pressure, and chemical compatibility.

    • Reactor materials must also be able to withstand corrosion and erosion over time.

    • Materials used i...

  • Answered by AI
  • Q2. Remove to change reactor new sheel
  • Ans. 

    The question is unclear and lacks context.

    • Please provide more information about the reactor and the new shell.

    • What is the reason for removing the old shell?

    • What tools and equipment are required for the job?

    • What safety precautions need to be taken?

    • Are there any specific procedures or guidelines to follow?

    • Consult with experts and refer to manuals before attempting the task.

  • Answered by AI
  • Q3. Types of vessels entry
  • Ans. 

    There are three types of vessels entry: Confined Space Entry, Hot Work Entry, and Cold Work Entry.

    • Confined Space Entry involves entering a space that is enclosed and has limited access points.

    • Hot Work Entry involves entering a space where welding, cutting, or other heat-producing activities are being performed.

    • Cold Work Entry involves entering a space where maintenance or repair work is being done that does not involve...

  • Answered by AI
  • Q4. Types of blowers and full form of pm
  • Ans. 

    Blowers can be classified into centrifugal, positive displacement, and regenerative types. PM stands for Preventive Maintenance.

    • Centrifugal blowers use centrifugal force to increase air pressure

    • Positive displacement blowers use a mechanical means to trap and transport air

    • Regenerative blowers use a rotating impeller to create air flow

    • PM is a maintenance strategy that involves regular inspections and repairs to prevent e

  • Answered by AI
  • Q5. Types of empelr and no oil
  • Ans. 

    Empelr and no oil are not common terms in maintenance engineering. Please provide more context.

    • Please provide more information or context for the terms empelr and no oil.

    • Without context, it is difficult to provide a meaningful answer.

    • It is possible that these terms are specific to a certain industry or company.

    • Please clarify the question so that a proper answer can be given.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good..job seekers and company i
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Nov 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Tell me about yourself , what is your biggest strength, how should I consider you for this post
  • Ans. 

    I am a motivated and dedicated individual with strong problem-solving skills and a passion for learning.

    • Strong problem-solving skills

    • Motivated and dedicated

    • Passionate about learning

    • Quick learner

    • Excellent communication skills

    • Team player

  • Answered by AI
Round 3 - Technical 

(4 Questions)

  • Q1. What is mass transfer
  • Ans. 

    Mass transfer is the movement of substances from one place to another due to a concentration gradient.

    • Mass transfer involves the transfer of mass or substances, such as molecules or ions, from one phase to another.

    • It occurs due to a difference in concentration or partial pressure between the two phases.

    • Examples of mass transfer include the diffusion of gases in air, the movement of solutes in a liquid, and the evaporat...

  • Answered by AI
  • Q2. What are centrifugal pumps
  • Ans. 

    Centrifugal pumps are devices that use centrifugal force to move fluids through a system.

    • Centrifugal pumps are commonly used in industries such as oil and gas, water treatment, and chemical processing.

    • They consist of an impeller that rotates to create centrifugal force, which pushes the fluid towards the pump outlet.

    • The fluid enters the pump through the suction inlet and is accelerated by the impeller.

    • The kinetic energ...

  • Answered by AI
  • Q3. What is vaccum distillation
  • Ans. 

    Vaccum distillation is a process that separates liquids based on their boiling points under reduced pressure.

    • Vaccum distillation is used to purify liquids with high boiling points or heat-sensitive compounds.

    • It involves heating the liquid in a distillation flask under reduced pressure to lower its boiling point.

    • The reduced pressure allows the liquid to vaporize at a lower temperature, preventing thermal degradation.

    • The...

  • Answered by AI
  • Q4. What is ventury
  • Ans. 

    A venturi is a device used to measure the flow rate of a fluid by creating a pressure difference.

    • A venturi consists of a narrow throat section and wider inlet and outlet sections.

    • As fluid flows through the venturi, its velocity increases in the narrow throat, causing a decrease in pressure.

    • The pressure difference is measured and used to calculate the flow rate of the fluid.

    • Venturis are commonly used in industries such ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just focus on basic aspects of chemical engineering. And go through the distillation part.

Deepak Phenolics Interview FAQs

How many rounds are there in Deepak Phenolics Apprenticeship Trainee interview?
Deepak Phenolics interview process usually has 1 rounds. The most common rounds in the Deepak Phenolics interview process are Technical.
What are the top questions asked in Deepak Phenolics Apprenticeship Trainee interview?

Some of the top questions asked at the Deepak Phenolics Apprenticeship Trainee interview -

  1. what are the different types of compress...read more
  2. what do you understand by the word Entr...read more
  3. what is the role of a crank sh...read more

Tell us how to improve this page.

Deepak Phenolics Apprenticeship Trainee Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

UPL Interview Questions
4.1
 • 174 Interviews
DCM Shriram Interview Questions
4.2
 • 86 Interviews
Atul Interview Questions
3.9
 • 83 Interviews
BASF Interview Questions
4.4
 • 31 Interviews
Air Liquide Interview Questions
3.7
 • 22 Interviews
View all

Deepak Phenolics Apprenticeship Trainee Reviews and Ratings

based on 2 reviews

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 2 Reviews and Ratings
Senior Executive
114 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
92 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive
91 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Field Executive
37 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
34 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Deepak Phenolics with

Hindustan Organic Chemicals

3.9
Compare

Thirumalai Chemicals

4.0
Compare

Gujarat Alkalies & Chemicals

4.5
Compare

DCM Shriram

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview