AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Danieli Corus Quality Engineer Interview Questions, Process, and Tips
Danieli Corus Quality Engineer Interview Experiences
1 interview found
Anonymous
Selected
I applied via LinkedIn and was interviewed before Oct 2022. There were 4 interview rounds.
(4 Questions)
- Q1. Explain about your profile and yourself
- Q2. What is your strength and weakness
- Q3. Why we should hire you
- Q4. What makes you feel getting hired
(7 Questions)
- Q1. Questions related to metallurgy like solidification of grey iron.
- Q2. Effect of changing different elements such as Si, Carbon , Cr etc in grey iron or sg iron on mechanical properties
- Ans.
Changing elements like Si, Carbon, Cr in grey iron or sg iron can significantly impact mechanical properties.
Increasing Silicon content can improve fluidity and machinability but decrease strength
Increasing Carbon content can increase hardness and wear resistance
Adding Chromium can improve corrosion resistance and strength
Changing elements must be carefully balanced to achieve desired mechanical properties
- Q3. Effect of process parameters on mechanical properties
- Ans.
Process parameters such as temperature, pressure, and time can significantly impact the mechanical properties of a material.
Temperature: Higher temperatures can increase ductility but decrease strength.
Pressure: Higher pressure can improve density and strength.
Time: Longer processing times can lead to better homogeneity and mechanical properties.
Example: Heat treatment of steel involves specific temperature and time pa...
- Q4. Types of Defects in castings
- Ans.
Types of defects in castings include shrinkage, porosity, cold shuts, misruns, and inclusions.
Shrinkage: caused by inadequate feeding of molten metal during solidification, resulting in voids or cavities in the casting
Porosity: caused by trapped gases in the molten metal, leading to small holes or bubbles in the casting
Cold shuts: occur when two portions of the casting do not fully fuse together during solidification
Mi...
- Q5. What factors lead to increase or decrease of mechanical properties like tensile in grey iron
- Ans.
Factors affecting mechanical properties like tensile in grey iron include composition, microstructure, heat treatment, and casting process.
Composition of grey iron, including the amount of carbon and silicon, affects its mechanical properties.
Microstructure, such as graphite morphology and matrix structure, plays a significant role in determining tensile strength.
Heat treatment can alter the mechanical properties of gr...
- Q6. How to decide the Carbon equivalent
- Ans.
Carbon equivalent is determined by calculating the combined effect of different alloying elements on the hardenability of steel.
Calculate the carbon equivalent using the formula: CE = C + (Mn/6) + (Cr + Mo + V)/5 + (Ni + Cu)/15
Higher carbon equivalent indicates higher hardenability and potential for cracking during welding
Lower carbon equivalent is preferred for better weldability and toughness
Carbon equivalent is impo...
- Q7. Distinguishing between nitrogen pinhole or hydrogen pinholes
- Ans.
Nitrogen pinholes are typically smaller and more numerous compared to hydrogen pinholes.
Nitrogen pinholes are usually smaller in size and more numerous than hydrogen pinholes.
Hydrogen pinholes are larger in size and less frequent than nitrogen pinholes.
Nitrogen pinholes are commonly found in aluminum castings, while hydrogen pinholes are more common in steel castings.
(1 Question)
- Q1. Salary and negotiation
Interview Preparation Tips
Interview questions from similar companies
Interview Questionnaire
1 Question
- Q1. Mostly they checking your presence in interview and asking about your experience for particular field and background.
(5 Questions)
- Q1. Embedded C questions
- Q2. Watchdog Timer, I2C, SPI, UART
- Q3. Design State Machine
- Q4. Mix Sound Driver
- Q5. Renesas related
Interview Preparation Tips
Parthiban Srinivasan
Selected
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There were 3 interview rounds.
(3 Questions)
- Q1. Bootloader related UDS services
- Q2. HSM and flash driver
- Q3. Startup code sequence
- Ans.
Startup code sequence refers to the order in which code is executed when a program is launched.
Startup code sequence typically involves initializing variables, setting up memory, and executing any necessary setup functions.
Examples of startup code sequence include setting up hardware registers in embedded systems, initializing global variables in C programs, and loading configuration files in web applications.
(3 Questions)
- Q1. Are you ready to work on weekends
- Ans.
Yes, I am willing to work on weekends if necessary to meet project deadlines or address urgent issues.
I understand that sometimes working on weekends may be required in order to meet project deadlines or address urgent issues.
I am committed to delivering high-quality work and am willing to put in extra hours when needed.
I am flexible with my schedule and can adjust my plans to accommodate weekend work if necessary.
- Q2. How will you manage conflicts within the team
- Ans.
I will address conflicts by promoting open communication, active listening, and facilitating constructive discussions.
Encourage open communication among team members to address conflicts early on
Practice active listening to understand all perspectives involved
Facilitate constructive discussions to find mutually beneficial solutions
Establish clear team norms and guidelines for conflict resolution
Seek input from team mem...
- Q3. Why are you switching jobs
- Ans.
Seeking new challenges and opportunities for growth in a more innovative and dynamic environment.
Looking for new challenges and opportunities for growth
Interested in working in a more innovative and dynamic environment
Seeking career advancement and professional development
(2 Questions)
- Q1. Salary negotiation and Notice period
- Q2. Why are you switching
- Ans.
Seeking new challenges and opportunities for growth in a different environment.
Looking for new challenges and opportunities for growth
Interested in working with different technologies or industries
Seeking a better work-life balance or company culture
Wanting to expand skill set or take on more responsibilities
Relocation to a new area
I applied via Company Website and was interviewed in Feb 2021. There were 4 interview rounds.
Interview Questionnaire
5 Questions
- Q1. What is 5S?
- Ans.
5S is a workplace organization method that aims to improve efficiency and productivity by eliminating waste and optimizing workflow.
Sort - separate necessary items from unnecessary ones
Set in order - arrange necessary items in a logical and efficient manner
Shine - clean and maintain the workplace
Standardize - establish procedures and guidelines for maintaining the 5S system
Sustain - continuously improve and maintain th...
- Q2. What is 7QC Tool ?
- Ans.
7QC Tool is a set of 7 quality control tools used for process improvement and problem-solving.
The tools are: Pareto Chart, Cause-and-Effect Diagram, Check Sheet, Control Chart, Histogram, Scatter Diagram, and Flow Chart.
They help in identifying and analyzing problems, and finding solutions.
For example, a Pareto Chart can be used to identify the most frequent problems in a process, while a Cause-and-Effect Diagram can h...
- Q3. What is Kizen ?
- Ans.
Kaizen is a Japanese term for continuous improvement.
Kaizen involves making small, incremental changes to improve processes and systems.
It is a key principle of Lean manufacturing and Six Sigma methodologies.
Kaizen encourages employee involvement and empowerment in the improvement process.
Examples of Kaizen include reducing waste, improving efficiency, and enhancing quality.
Kaizen is a long-term approach to improvement
- Q4. About yourself.
- Q5. Previous work related Question.
Interview Preparation Tips
I applied via Recruitment Consulltant and was interviewed in Mar 2022. There were 2 interview rounds.
(1 Question)
- Q1. Basics of Multi Threading
Data structures and Algorithms
Interview Preparation Tips
Selected
I applied via Referral and was interviewed before Feb 2022. There were 4 interview rounds.
Discussion about Basic Information
(1 Question)
- Q1. I was applying for CAD engineer so asking about CAD commands and telecommunications. Prepare with your skills.
(1 Question)
- Q1. Discussion about Work experience, CTC, work Location.
Interview Preparation Tips
I applied via Company Website and was interviewed in Jan 2022. There were 3 interview rounds.
(2 Questions)
- Q1. What is mean by testing
- Ans.
Testing is the process of evaluating a system or component to determine if it satisfies specified requirements.
Testing is done to identify defects or errors in software or hardware.
It involves executing a system or component with the intent of finding bugs or verifying its functionality.
Testing can be performed at various levels such as unit testing, integration testing, system testing, and acceptance testing.
Different...
- Q2. Why we are doing testing
- Ans.
Testing is done to ensure that the software meets the requirements and is of high quality.
To identify defects and errors in the software
To ensure that the software meets the specified requirements
To improve the quality of the software
To increase customer satisfaction
To reduce the risk of software failure
To ensure that the software is reliable and secure
(5 Questions)
- Q1. What are your salary expectations?
- Q2. What is your family background?
- Q3. Share details of your previous job.
- Q4. What are your strengths and weaknesses?
- Q5. Tell me about yourself.
Interview Preparation Tips
Skills evaluated in this interview
I applied via Referral and was interviewed in Nov 2020. There were 4 interview rounds.
Interview Questionnaire
1 Question
- Q1. MPLS, OSPF, BGP, ISIS
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Sep 2020. There were 4 interview rounds.
Interview Questionnaire
2 Questions
- Q1. How to integrate the sites or the integration steps?
- Ans.
Integration of sites involves identifying the systems to be integrated, defining the data flow, and implementing the integration process.
Identify the systems to be integrated
Define the data flow between the systems
Choose the appropriate integration method (API, ETL, etc.)
Develop and test the integration process
Deploy the integration process and monitor for errors
Ensure data security and compliance
Provide ongoing suppor
- Q2. What vlan?
- Ans.
VLAN stands for Virtual Local Area Network and is used to logically separate a network into smaller segments.
VLANs are used to improve network performance and security.
They allow for better network management and easier troubleshooting.
VLANs can be configured on switches and routers.
Examples of VLANs include separating guest and employee networks or separating different departments within a company.
Interview Preparation Tips
Skills evaluated in this interview
Danieli Corus Interview FAQs
Some of the top questions asked at the Danieli Corus Quality Engineer interview -
Tell us how to improve this page.
Interview Questions for Popular Designations
- Quality Inspector Interview Questions
- Senior Quality Engineer Interview Questions
- Quality Controller Interview Questions
- Quality Assurance Interview Questions
- Quality Manager Interview Questions
- Quality Executive Interview Questions
- Quality Assurance Officer Interview Questions
- Executive Quality Assurance Interview Questions
- Show more
Danieli Corus Quality Engineer Interview Process
based on 1 interview
Interview experience
Quality Engineer Interview Questions from Similar Companies
Danieli Corus Quality Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Deputy Manager
9
salaries
|  ₹11 L/yr - ₹20 L/yr |
|
Manager
8
salaries
| ₹12 L/yr - ₹17 L/yr |
|
Assistant Manager
7
salaries
| ₹8.5 L/yr - ₹11 L/yr |
|
Document Controller
5
salaries
| ₹3.8 L/yr - ₹6.6 L/yr |
|
Mechanical Engineer
5
salaries
| ₹3.5 L/yr - ₹6.5 L/yr |
Huawei Technologies
Indorama
Marelli
Enco Engineers Combine
- Home >
- Interviews >
- Danieli Corus Interview Questions >
- Danieli Corus Quality Engineer Interview Questions
