Upload Button Icon Add office photos

Dalmia Bharat Cement

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Dalmia Bharat Cement Senior Technician Interview Questions and Answers

Updated 18 Mar 2024

Dalmia Bharat Cement Senior Technician Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(6 Questions)

  • Q1. How to hide lying maintenance mechanic jobs
  • Ans. 

    To hide lying maintenance mechanic jobs, one can falsify records, manipulate data, or cover up mistakes.

    • Falsify maintenance logs to show completed tasks that were not actually done

    • Manipulate equipment readings to make it appear that maintenance was performed

    • Cover up mistakes by quickly fixing issues before they are noticed

    • Provide false documentation or reports to show compliance with maintenance schedules

  • Answered by AI
  • Q2. Centrifugal pumps practically handing of the jobs Preventive maintenance jobs
  • Ans. Oil level checking &analyze the conditions >m Check the free rotation with hand >■ Check pump float axúial play &radial play with use dial cage >■ Check pump run out pump coupling side >Check coupling &coupling pushing conditions >■ Check the all festers tightening
  • Answered Anonymously
  • Q3. Major overhauling single &multistage centrifugal pumps
  • Ans. Knowledge pump dismantle &assemble &preparing tools and spears > Maintain dismantle clearance list & assemble clearance list >■ Shaft run out checking &shaft straight and correct the run out >a Shaft measurement for compare old &new shafts or fabricate new shaft>■ Assemble rotor and check rotor runout adjusting &corrections >■ Pump rotor assembly for dynamic balancing >■ Measurement wearing ring &replace the wea...
  • Answered Anonymously
  • Q4. Rotary pump type
  • Ans. External double helical gear pump >Internal gear pump Screw pump
  • Answered Anonymously
  • Q5. Rotary pump practically handled of major overhauling work
  • Ans. 

    Yes, I have practically handled major overhauling work on rotary pumps.

    • Performed disassembly and reassembly of rotary pumps for maintenance and repair

    • Replaced worn out parts such as seals, bearings, and impellers

    • Inspected and tested pump components to ensure proper functioning

    • Adjusted pump settings and alignments for optimal performance

    • Trained junior technicians on rotary pump overhauling procedures

  • Answered by AI
  • Q6. Mechanical seal practically handled of major overhauling work
  • Ans. >a The knowledge seal lapping for using diamond lapping liquid >a Face testing for dicrocromatic light >■ Check all parts condition >■ Seal assemble and check seal compression measurement by use the verniyer depth gauge >■ Seat ring assemble on the gland plate for use light duty press >■ Seal leakage check >■ Mate ring assemble retainer with use snap ring
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Thank

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Dec 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Star delta starter, induction motor speed torque characteristics, electrical mechanical topology
  • Q2. Switchgears types, transformer and motors

Interview Preparation Tips

Interview preparation tips for other job seekers - Maintenance is purely technical based. If you are fresher then the questions will be of entry level and for experience professionals the questions will be based on the area of work you at present in.

Interview Questionnaire 

1 Question

  • Q1. Fortinet firewall, vlan, vpn
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(3 Questions)

  • Q1. Reason for joining our company
  • Ans. 

    I am impressed by the company's commitment to innovation and employee development.

    • I am excited about the opportunities for growth and advancement within the company.

    • I admire the company's strong reputation in the industry.

    • I believe in the company's values and mission statement.

  • Answered by AI
  • Q2. Technical questions related to your core
  • Q3. How would you increase productivity.
  • Ans. 

    Increasing productivity can be achieved by setting clear goals, providing proper training, offering incentives, and promoting a positive work environment.

    • Set clear goals and expectations for employees to work towards.

    • Provide proper training and resources to help employees perform their tasks efficiently.

    • Offer incentives such as bonuses or rewards for meeting or exceeding productivity targets.

    • Promote a positive work env...

  • Answered by AI
Interview experience
4
Good
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Jan 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(1 Question)

  • Q1. Urs pesonal details and family BACKGROUND
Round 3 - Technical 

(1 Question)

  • Q1. Urs technical knowledge

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepare as you mentioned in yours resume that they will ask

I applied via Naukri.com and was interviewed before Feb 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Basic civil engineering questions, based on our experience.
Round 3 - HR 

(1 Question)

  • Q1. Why are you looking for a change?

Interview Preparation Tips

Interview preparation tips for other job seekers - Negotiate with HR properly, attend interviews boldly

I applied via Referral and was interviewed in Sep 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Cost of all operations in mining. Drilling, Blasting, loading, hauling, crushing, Royalty, Nmet, Dmft, Dozing etc How they will reduce.
  • Ans. 

    Cost reduction in mining operations through optimization and efficiency measures.

    • Implementing advanced technologies for drilling, blasting, and loading to reduce labor costs and increase efficiency.

    • Optimizing haul routes and using autonomous haulage systems to reduce fuel consumption and maintenance costs.

    • Improving crushing and grinding processes to reduce energy consumption and increase throughput.

    • Negotiating better r...

  • Answered by AI
  • Q2. Difference between Dth drilling and Top hammer Drilling.
  • Ans. 

    DTH drilling is used for deeper and larger holes while top hammer drilling is used for smaller and shallower holes.

    • DTH drilling uses a down-the-hole hammer that is powered by compressed air to drill deeper and larger holes.

    • Top hammer drilling uses a drill bit that is directly attached to the drill rod and is powered by a hydraulic or pneumatic rock drill.

    • DTH drilling is more efficient in hard rock formations while top ...

  • Answered by AI
Round 3 - Technical 

(2 Questions)

  • Q1. About you technical head unit head
  • Q2. Manufacturing head Difference between Dth Drilling and Top hammer Drilling And problem associate with Top hammer Drilling.
  • Ans. 

    DTH drilling is used for deeper and larger holes while top hammer drilling is used for smaller and shallower holes.

    • DTH drilling uses a pneumatic hammer that is located at the bottom of the drill string while top hammer drilling uses a hammer that is located at the top of the drill string.

    • DTH drilling is more efficient for deeper and larger holes as it can penetrate harder rock formations.

    • Top hammer drilling is more sui...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Abouts yourself
And all related working and operations questions whatever you are doing.

I applied via Shine and was interviewed before May 2021. There was 1 interview round.

Round 1 - One-on-one 

(3 Questions)

  • Q1. Tell me about yourself, current updates, family background, technical
  • Q2. Technical tax questions
  • Q3. Future inspiration and committement

Interview Preparation Tips

Interview preparation tips for other job seekers - always transparent and to the point answer

I applied via Naukri.com

Round 1 - Aptitude Test 

Aptiude test exam

Round 2 - Technical 

(1 Question)

  • Q1. Technical questions depends on your department
Round 3 - HR 

(2 Questions)

  • Q1. What are your salary expectations?
  • Q2. Share details of your previous job.

Interview Preparation Tips

Interview preparation tips for other job seekers - Best company to work and job security untill you get your retirement

I applied via Recruitment Consulltant and was interviewed in Mar 2022. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. All Electrical T Questions echnician
  • Q2. • LT/HTMotors,Feeders&itscontrols • Transformertesting • H.T/L.Tmotorinstallation/Replacement • Powerdistributionsystems PCC,MCC,Feedersetc.
  • Q3. Instrumentation • Mitters&switches,Pressure switches,DPswitches, • PressureGauges,RTD,Thermocouple,SolenoidValve, ZSS, BSS, etc.
  • Q4. Operation&Maintenanceof: LTMotors,BeltBucketElevator,ConveyorBelts,IDFan,RecirculationFan, AirRootBlowers, BagFilters, Bulkloadingsystem, KW)withpanel,LRS,HT/LTbreaker,IMCC,MCC,PCCmaintenance • Maintena...
  • Q5. Safety Questions all Electrical safety

Interview Preparation Tips

Interview preparation tips for other job seekers - “Be clear on what you want, why you want it and what qualifies you… Without clarity from the very start, virtually every stage that follows will be based on little more than a hunch — and that is an extremely fragile foundation for navigating a dynamic
Contribute & help others!
anonymous
You can choose to be anonymous

Dalmia Bharat Cement Interview FAQs

How many rounds are there in Dalmia Bharat Cement Senior Technician interview?
Dalmia Bharat Cement interview process usually has 1 rounds. The most common rounds in the Dalmia Bharat Cement interview process are Technical.
What are the top questions asked in Dalmia Bharat Cement Senior Technician interview?

Some of the top questions asked at the Dalmia Bharat Cement Senior Technician interview -

  1. How to hide lying maintenance mechanic j...read more
  2. Rotary pump practically handled of major overhauling w...read more
  3. Major overhauling single &multistage centrifugal pu...read more

Recently Viewed

PHOTOS

InsuranceDekho

3 office photos

LIST OF COMPANIES

Credit Bajaar

Overview

INTERVIEWS

Broadridge Financial Solutions

80 top interview questions

LIST OF COMPANIES

National Stock Exchange of India

Locations

LIST OF COMPANIES

Dalmia Bharat Cement

Locations

INTERVIEWS

Renault-Nissan

No Interviews

INTERVIEWS

Dalmia Bharat Cement

No Interviews

INTERVIEWS

NeoSOFT

No Interviews

INTERVIEWS

Optum Global Solutions

No Interviews

INTERVIEWS

Dalmia Bharat Cement

80 top interview questions

Tell us how to improve this page.

Dalmia Bharat Cement Senior Technician Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

UltraTech Cement Interview Questions
4.2
 • 575 Interviews
JK Cement Interview Questions
4.1
 • 255 Interviews
Grasim Industries Interview Questions
4.0
 • 205 Interviews
ACC Interview Questions
3.9
 • 190 Interviews
Shree Cement Interview Questions
3.8
 • 155 Interviews
Ambuja Cements Interview Questions
3.9
 • 109 Interviews
Star Cement Interview Questions
4.0
 • 64 Interviews
HIL Limited Interview Questions
4.1
 • 61 Interviews
View all
Dalmia Bharat Cement Senior Technician Salary
based on 6 salaries
₹3 L/yr - ₹4.2 L/yr
27% less than the average Senior Technician Salary in India
View more details

Dalmia Bharat Cement Senior Technician Reviews and Ratings

based on 3 reviews

3.8/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 3 Reviews and Ratings
Assistant Manager
398 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
297 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
295 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Sales Officer
229 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Technical Service Engineer
187 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Dalmia Bharat Cement with

UltraTech Cement

4.2
Compare

Ambuja Cements

3.9
Compare

ACC

3.9
Compare

Shree Cement

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent