Upload Button Icon Add office photos

CR Asia

Compare button icon Compare button icon Compare

Filter interviews by

CR Asia Mechanical Engineer Interview Questions and Answers

Updated 18 Oct 2021

CR Asia Mechanical Engineer Interview Experiences

1 interview found

I applied via Walk-in and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. What is responsibility of mechanical engineer

Interview Preparation Tips

Interview preparation tips for other job seekers - The responsibility of mechanical engineer to execute the job in safe manner and arrange the resources for a job and to coordinate the supervisor

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in May 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Mechanical Technician Questions
  • Q2. Engine and gearbox Questions

Interview Preparation Tips

Topics to prepare for Madina Group Mechanical Technician interview:
  • Mechanical Technician
Interview preparation tips for other job seekers - Any tips for mechanical Technician Questions and answers and gearbox and engine Questions and answers
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I was interviewed in Dec 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Engine relented question and preventive maintenance
  • Q2. Technical issue gear box

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice job seekers and help full , comfortable advice
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Newspaper Ad and was interviewed before Aug 2023. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. About heat exchangers
  • Q2. About columns and internals of columns
Round 2 - HR 

(2 Questions)

  • Q1. Discussion about Salary
  • Q2. About Future goals

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company

I applied via Newspaper Ad and was interviewed before Sep 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Question about exchanger
  • Q2. Exchanger colums vessals heaters
Round 3 - Technical 

(2 Questions)

  • Q1. Exchanger colums heaters vessals
  • Q2. Exchanger colums vessals heaters

Interview Preparation Tips

Topics to prepare for Arabian Industries Mechanical Supervisor interview:
  • Static works
  • Heat Exchangers
  • Colums
  • Vessals
  • Stainer
  • Filters
  • Heaters
Interview preparation tips for other job seekers - Good knowledge of exchanger colums
Vessals pump stainer filter

I applied via Recruitment Consultant and was interviewed before Jun 2019. There were 4 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. 1.Pump and compressor trouble shooting.
  • Q2. Safety watch roles and responsible
  • Q3. Blinding procedure
  • Q4. Pump alignment

Interview Preparation Tips

Interview preparation tips for other job seekers - If you know answer ,tell .if dont know the answer , say I don't know
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
No response

I applied via Approached by Company and was interviewed before Oct 2023. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. What's your experience: OIL AND GAS FIELD
  • Ans. 

    I have 5 years of experience working in the oil and gas field, specializing in maintenance and troubleshooting of equipment.

    • Experience in maintenance and troubleshooting of equipment in oil and gas field

    • Knowledge of safety protocols and regulations in the industry

    • Familiarity with various tools and technologies used in the field

    • Worked on projects involving drilling, extraction, and transportation of oil and gas

    • Collabora...

  • Answered by AI
  • Q2. What's your role: MECHANICAL TECHNICIAN STATIC AND ROTATING JOB AS A FOREMAN ROLE QATAR GAS NORTH
  • Ans. 

    As a Mechanical Technician Static and Rotating Foreman at Qatar Gas North, my role involves overseeing maintenance and repair of static and rotating equipment to ensure smooth operations.

    • Oversee maintenance and repair of static and rotating equipment

    • Ensure smooth operations of equipment

    • Supervise a team of technicians

    • Implement safety procedures and protocols

    • Coordinate with other departments for maintenance schedules

  • Answered by AI
  • Q3. 21 YEARS.MECHANICAL TECHNICIAN STATIC AND ROTATING JOB PERMIT RECEIVER PERFORMING PARTY IN QATAR GAS NORTH
  • Q4. MechanicalTechnicianSTATIC
  • Q5. Mechanical technician static

Interview Preparation Tips

Interview preparation tips for other job seekers - Make sure that you reach to the recruiter personalize your message.
Make sure. You are open to workis on
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(11 Questions)

  • Q1. What is centrifugal pump?
  • Ans. 

    A centrifugal pump is a mechanical device used to transport fluids by converting rotational kinetic energy into hydrodynamic energy.

    • Centrifugal pumps are commonly used in various industries, including oil and gas, water treatment, and HVAC systems.

    • They work by using an impeller to rotate and create a centrifugal force, which pushes the fluid towards the pump outlet.

    • The fluid enters the pump through the suction inlet an...

  • Answered by AI
  • Q2. How many types of valve? What are they?
  • Ans. 

    There are several types of valves used in mechanical systems.

    • Gate valve: used to control the flow of fluid by lifting or lowering a gate

    • Ball valve: uses a ball to control the flow of fluid

    • Butterfly valve: uses a disc to control the flow of fluid

    • Check valve: allows fluid to flow in one direction only

    • Globe valve: controls flow by raising or lowering a plug

    • Needle valve: uses a long, tapered needle to control flow

    • Diaphragm...

  • Answered by AI
  • Q3. Write about ball valve?
  • Ans. 

    A ball valve is a type of valve that uses a ball-shaped disc to control the flow of fluid through a pipe.

    • Ball valves are commonly used in industrial applications for their durability and reliability.

    • They have a simple design, consisting of a ball with a hole in the middle that can be rotated to control the flow of fluid.

    • Ball valves can be either full port or reduced port, depending on the size of the ball and the hole.

    • ...

  • Answered by AI
  • Q4. What is shell and tube heat exchanger?
  • Ans. 

    A shell and tube heat exchanger is a device used to transfer heat between two fluids.

    • Consists of a shell (outer vessel) and tubes (inner vessels)

    • One fluid flows through the tubes while the other flows around the tubes in the shell

    • Heat is transferred from one fluid to the other through the tube walls

    • Commonly used in industries such as power generation, chemical processing, and HVAC

    • Example: Cooling water in a power plant

  • Answered by AI
  • Q5. How many types of heat exchanger? What are they?
  • Ans. 

    There are several types of heat exchangers, including shell and tube, plate and frame, and finned tube.

    • Shell and tube heat exchangers are the most common type and consist of a shell with tubes inside.

    • Plate and frame heat exchangers use thin plates to transfer heat between fluids.

    • Finned tube heat exchangers have tubes with fins attached to increase surface area for heat transfer.

    • Other types include spiral, double pipe, ...

  • Answered by AI
  • Q6. What is that full form of PPE?
  • Ans. 

    PPE stands for Personal Protective Equipment.

    • PPE is equipment worn to minimize exposure to hazards that may cause serious workplace injuries or illnesses.

    • Examples of PPE include safety glasses, gloves, hard hats, respirators, and safety shoes.

    • PPE should be selected based on the specific hazards present in the workplace.

    • Employers are responsible for providing PPE to their employees and ensuring that it is properly maint...

  • Answered by AI
  • Q7. What is axial flow pump?
  • Ans. 

    An axial flow pump is a type of pump that uses an impeller to create fluid flow parallel to the pump shaft.

    • Axial flow pumps are commonly used in applications where large volumes of fluid need to be moved at low to medium pressures.

    • They are often used in irrigation systems, drainage systems, and cooling systems.

    • The impeller of an axial flow pump has blades that resemble a propeller, which helps in generating the axial f...

  • Answered by AI
  • Q8. Write about check valve?
  • Ans. 

    A check valve is a mechanical device that allows fluid to flow in one direction only.

    • Check valves are commonly used in plumbing systems to prevent backflow of water.

    • They are also used in hydraulic systems to prevent reverse flow of fluid.

    • Check valves can be classified into different types such as swing check valves, lift check valves, and ball check valves.

    • These valves work by using a disc or a ball that opens and clos...

  • Answered by AI
  • Q9. Shortly explain about positive displacement pump?
  • Ans. 

    Positive displacement pump is a type of pump that moves fluid by trapping a fixed amount of it and then forcing it into the discharge pipe.

    • Positive displacement pumps operate by trapping a specific volume of fluid and then forcing it into the discharge pipe.

    • These pumps are capable of generating high pressures and are used in various industries such as oil and gas, chemical, and food processing.

    • Examples of positive disp...

  • Answered by AI
  • Q10. What is globe valve?
  • Ans. 

    A globe valve is a type of valve used to regulate or stop the flow of fluid in a pipeline.

    • It has a spherical body with an internal baffle that directs the flow of fluid.

    • The valve can be opened or closed by rotating the stem.

    • It provides a tight seal when closed, preventing leakage.

    • Globe valves are commonly used in applications where throttling or regulating flow is required.

    • They are often found in water systems, steam s

  • Answered by AI
  • Q11. What is PPE ? Give it explain?
  • Ans. 

    PPE stands for Personal Protective Equipment. It refers to protective clothing, helmets, goggles, or other equipment designed to protect the wearer's body from injury or infection.

    • PPE is used in various industries to protect workers from hazards.

    • Examples of PPE include safety glasses, gloves, hard hats, respirators, and earplugs.

    • PPE should be selected based on the specific hazards present in the workplace.

    • Proper traini...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Learning clear about to our course subject. Work to hard learn all levels.

I applied via Recruitment Consultant and was interviewed before Jun 2019. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. 1. During confined space job , what is the role of safety watch ? 2. Alignment method of pump and motor. 3. Different type of Gasket , valves using in plant. 4. Compressor type and trouble shooting of rec...
  • Ans. 

    Answering questions related to confined space job, alignment of pump and motor, types of gaskets and valves, and troubleshooting reciprocating compressor.

    • Safety watch is responsible for monitoring the workers inside the confined space and ensuring their safety.

    • Alignment of pump and motor can be done using dial indicators or laser alignment tools.

    • Different types of gaskets include spiral wound, ring joint, and sheet gas...

  • Answered by AI

I applied via Recruitment Consulltant and was interviewed in Feb 2022. There were 3 interview rounds.

Round 1 - One-on-one 

(4 Questions)

  • Q1. Oil and gas,petrochemical
  • Q2. Static and rotary ect
  • Q3. Static and rotating ect,
  • Q4. Permit ,sefty ,technical also
Round 2 - Assignment 
Round 3 - Technical 

(2 Questions)

  • Q1. Pump,compressor,turbine ,gear box also
  • Q2. Heat exchanger,vessal ,fin fan ,column also

Interview Preparation Tips

Topics to prepare for Madina Group Mechanical Maintenance Supervisor interview:
  • Mechanical Maintenance
  • Oil and gas
  • Petrochemical
  • Diploma
Interview preparation tips for other job seekers - Microsoft is also good, dont tension

Tell us how to improve this page.

CR Asia Mechanical Engineer Interview Process

based on 2 interviews

Interview experience

5
  
Excellent
View more
CR Asia Mechanical Engineer Salary
based on 56 salaries
₹2.3 L/yr - ₹6 L/yr
15% less than the average Mechanical Engineer Salary in India
View more details

CR Asia Mechanical Engineer Reviews and Ratings

based on 7 reviews

4.0/5

Rating in categories

4.0

Skill development

3.9

Work-life balance

3.4

Salary

3.8

Job security

3.9

Company culture

4.0

Promotions

4.1

Work satisfaction

Explore 7 Reviews and Ratings
Mechanical Engineer
56 salaries
unlock blur

₹2.3 L/yr - ₹6 L/yr

Project Engineer
33 salaries
unlock blur

₹2.4 L/yr - ₹9.2 L/yr

QA QC Engineer
31 salaries
unlock blur

₹2 L/yr - ₹8.2 L/yr

Safety Officer
30 salaries
unlock blur

₹3.5 L/yr - ₹7.6 L/yr

Maintenance Engineer
21 salaries
unlock blur

₹3 L/yr - ₹6.2 L/yr

Explore more salaries
Compare CR Asia with

L&T Construction

4.0
Compare

Tata Projects

4.2
Compare

Shapoorji Pallonji Group

4.1
Compare

Hindustan Construction Company

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview