Filter interviews by
Clear (1)
I applied via Walk-in and was interviewed in Nov 2022. There were 2 interview rounds.
Flow rate is the amount of fluid passing through a point per unit time, while volumetric rate is the volume of fluid passing through a point per unit time.
Flow rate is measured in units like liters per minute, while volumetric rate is measured in units like cubic meters per hour.
Flow rate is dependent on the area of the pipe or channel, while volumetric rate is not.
For example, a flow rate of 10 liters per minute means...
The mass flow meter should be calibrated by a qualified technician using a traceable standard.
Calibration should be performed by a qualified technician with experience in calibrating mass flow meters.
The calibration should be performed using a traceable standard, such as a NIST-traceable calibration device.
The calibration should be performed at regular intervals to ensure accurate readings.
The calibration process shoul...
Thermocouples are classified by letter codes. Common types are J, K, T, E, R, S, and B.
Thermocouples are used to measure temperature in various industries.
Type J is made of iron and constantan, and is commonly used in food industry.
Type K is made of chromel and alumel, and is commonly used in industrial applications.
Type T is made of copper and constantan, and is commonly used in low-temperature applications.
Type E is ...
Different types of transmitters are used in power plants and carbon black plants depending on the application.
In power plants, pressure transmitters, temperature transmitters, level transmitters, and flow transmitters are commonly used.
In carbon black plants, pressure transmitters, temperature transmitters, and level transmitters are commonly used.
Examples of transmitters used in power plants include differential press...
Top trending discussions
Structural analysis involves methods to determine the behavior of structures under different loads and conditions.
Structural analysis is used to determine the strength, stiffness, and stability of structures.
Methods include finite element analysis, matrix methods, and computer simulations.
Terms include stress, strain, deformation, and buckling.
Structural analysis is important in designing safe and efficient structures.
...
posted on 23 Nov 2019
I applied via Walk-in and was interviewed in May 2019. There was 1 interview round.
I applied via Campus Placement and was interviewed before Jul 2020. There were 3 interview rounds.
There are various types of CCTV cameras such as dome, bullet, PTZ, thermal, and covert cameras.
Dome cameras are commonly used for indoor surveillance and have a wide-angle view.
Bullet cameras are weatherproof and have a longer range than dome cameras.
PTZ cameras can pan, tilt, and zoom to cover a larger area.
Thermal cameras use heat signatures to detect movement and are often used in low-light environments.
Covert camer...
CCTV stands for Closed Circuit Television. It is a system of video cameras used for surveillance and security purposes.
CCTV cameras are commonly used in public places like banks, airports, and shopping malls.
They can also be used in homes and businesses for security purposes.
CCTV footage can be used as evidence in criminal investigations.
The use of CCTV has raised concerns about privacy and civil liberties.
Advancements...
posted on 6 May 2019
I appeared for an interview in May 2019.
There are several types of bricks used in construction, including clay bricks, concrete bricks, and fire bricks.
Clay bricks are the most common type of brick used in construction.
Concrete bricks are made from cement, sand, and water and are used for their strength and durability.
Fire bricks are designed to withstand high temperatures and are used in fireplaces, ovens, and kilns.
Other types of bricks include sand-lime b...
I applied via Referral and was interviewed in Dec 2018. There were 6 interview rounds.
Trafo capacity refers to the maximum load a transformer can handle. Work description includes maintenance, testing, and troubleshooting of transformers.
Trafo capacity is measured in kVA (kilo-volt-ampere)
Work includes regular maintenance to ensure optimal performance
Testing involves checking for voltage regulation and insulation resistance
Troubleshooting involves identifying and fixing any issues with the transformer
Ex...
The protection device of a power transformer is called a Buchholz relay and it detects faults in the transformer oil.
Buchholz relay is installed in the pipeline between the transformer tank and the conservator tank
It detects faults such as overheating, overloading, and short circuits in the transformer oil
It works by detecting gas bubbles generated by the fault and tripping the transformer
It also provides an alarm sign...
I applied via Walk-in and was interviewed before Feb 2021. There was 1 interview round.
Efficiency of a boiler can be increased by improving insulation, optimizing combustion, and regular maintenance.
Improve insulation to reduce heat loss
Optimize combustion by adjusting air-to-fuel ratio and using efficient burners
Regular maintenance to clean and repair components
Use economizers to recover waste heat
Upgrade to high-efficiency boilers
Implement energy management systems to monitor and control boiler operati
based on 1 interview
Interview experience
based on 1 review
Rating in categories
Senior Executive
11
salaries
| ₹6.5 L/yr - ₹8.1 L/yr |
Executive
9
salaries
| ₹4.5 L/yr - ₹6 L/yr |
Deputy Manager
6
salaries
| ₹11 L/yr - ₹12 L/yr |
Assistant Manager
5
salaries
| ₹8.9 L/yr - ₹11.1 L/yr |
Senior Officer
4
salaries
| ₹4.1 L/yr - ₹5 L/yr |
Suzlon Group
Thermax Limited
Kirloskar Brothers
BHEL