Add office photos
Filter interviews by
Citroën Repair Technician Interview Questions and Answers
Citroën Repair Technician Interview Experiences
1 interview found
Anonymous
Selected
I applied via Walk-in and was interviewed in Nov 2022. There were 2 interview rounds.
(2 Questions)
- Q1. Tell Me About Your Self
- Q2. What Are Your Strength
Interview questions from similar companies
Selected
I applied via Company Website and was interviewed in Oct 2024. There was 1 interview round.
(6 Questions)
- Q1. What is the transformer?
- Ans.
A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.
Transformers are used to increase or decrease voltage levels in electrical circuits.
They consist of two coils of wire, known as the primary and secondary coils.
The primary coil is connected to the input voltage source, while the secondary coil is connected to the output load.
Transformers...
- Q2. What is the UPS?
- Ans.
UPS stands for Uninterruptible Power Supply, a device that provides emergency power to a load when the input power source fails.
UPS ensures continuous power supply during power outages or fluctuations
It typically consists of a battery, inverter, and charger
Commonly used in data centers, hospitals, and critical infrastructure
Examples include APC, CyberPower, and Eaton UPS systems
- Q3. What is MCB ?
- Ans.
MCB stands for Miniature Circuit Breaker, a device designed to protect electrical circuits from overloads and short circuits.
MCB is a type of circuit breaker that automatically switches off electrical circuits during abnormal conditions like overload or short circuit.
It is commonly used in residential and commercial electrical installations to protect electrical equipment and prevent electrical fires.
MCBs are available...
- Q4. Current and Voltage difference?
- Ans.
Current is the flow of electric charge, measured in Amperes, while voltage is the force that drives the current, measured in Volts.
Current is the rate of flow of electric charge in a circuit.
Voltage is the electrical potential difference that drives the current.
Current is measured in Amperes (A) while Voltage is measured in Volts (V).
Ohm's Law relates current, voltage, and resistance: V = I * R.
- Q5. What is the CT AND PT?
- Ans.
CT and PT are electrical devices used in power systems to measure current and voltage respectively.
CT stands for Current Transformer and is used to measure high currents by stepping down the current to a lower value.
PT stands for Potential Transformer and is used to measure high voltages by stepping down the voltage to a lower value.
CTs and PTs are commonly used in power distribution systems to provide accurate measure
- Q6. What is the last rating MCB hou to the amps
- Ans.
The last rating MCB can go up to 125 amps.
The last rating MCB can typically go up to 125 amps.
MCBs are available in various ratings such as 6A, 10A, 16A, 32A, 63A, and 125A.
The rating of an MCB determines the maximum current it can safely handle before tripping.
For higher current requirements, larger MCBs or other protective devices like MCCBs may be used.
Interview Preparation Tips
(4 Questions)
- Q1. Computer ke bare me
- Q2. Full form any computer
- Ans.
Full form of a computer is 'Common Operating Machine Particularly Used for Technical Education and Research.'
Common Operating Machine Particularly Used for Technical Education and Research
It is an acronym for the word 'computer'
Used to describe a machine that can be programmed to carry out sequences of arithmetic or logical operations automatically
- Q3. HTTP ke bare me
- Q4. FTP ke bare me
Interview Preparation Tips
john pradhan pradhan
Selected
I applied via Walk-in and was interviewed in May 2024. There were 2 interview rounds.
(3 Questions)
- Q1. If there Hazzard is occur so what should we do first
- Ans.
The first thing to do in case of a hazard is to ensure the safety of yourself and others.
Assess the situation to determine the nature and extent of the hazard.
Alert others in the vicinity about the hazard.
Follow safety protocols and procedures to mitigate the hazard.
Contact emergency services if necessary.
Evacuate the area if instructed to do so.
- Q2. What should you do when their is no EV
- Q3. Also the DG suddenly stopped
(2 Questions)
- Q1. What should u do when dg fuel dosnot passess through a enjector
- Ans.
Check for clogs in the fuel line, inspect the injector for damage, clean or replace the injector if necessary.
Inspect the fuel line for any clogs or blockages
Check the injector for any damage or malfunction
Clean the injector using appropriate tools and techniques
If cleaning doesn't work, consider replacing the injector
Ensure proper fuel flow and pressure to the injector
- Q2. How van we know earth leacage
- Ans.
Earth leakage can be detected using a residual current device (RCD) or ground fault circuit interrupter (GFCI).
Earth leakage can be detected by measuring the difference in current between the live and neutral wires in a circuit.
A residual current device (RCD) or ground fault circuit interrupter (GFCI) can be used to detect earth leakage and quickly disconnect the power supply to prevent electric shock.
Regular testing o...
Kool to the core of up to the mark
(2 Questions)
- Q1. Introduction reference
- Q2. Qualifications reference
Selected
I applied via AmbitionBox and was interviewed in Dec 2023. There was 1 interview round.
(2 Questions)
- Q1. Computer and software
- Q2. Series of programs, data and instructions used in a computer's hardware to help the device operate and you complete tasks. Hardware is the physical components that comprise a computer, such as the graphics...
- Ans.
Software is a collection of programs, data, and instructions that enable a computer to perform tasks.
Software is the intangible part of a computer system.
It includes operating systems, applications, and utilities.
Examples of software include Microsoft Windows, Adobe Photoshop, and Google Chrome.
Skills evaluated in this interview
afsal kh
Easy questions, not much to say
(1 Question)
- Q1. General questions. salary discussions. nothing much
Selected
I applied via Walk-in and was interviewed in Aug 2023. There were 3 interview rounds.
(4 Questions)
- Q1. What technical is
- Ans.
Yes I am iti fitter and electrical work experience 10 years
- Q2. Power cut working stop
- Ans.
Power cut no working stop on invator working start
- Q3. Short sircut mcb work
- Ans.
No mcb work on short sircut so short sir cut working Power on
- Q4. Power cut woking on benk
(4 Questions)
- Q1. Benk work good is
- Q2. Work on benk technical
- Q3. Power cut benking work
- Q4. Jow do benk working
Interview Preparation Tips
(1 Question)
- Q1. Some technical questions related to your field, if experience than related to
Citroën Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Repair Engineer Interview Questions
- Technician Interview Questions
- Electrical Technician Interview Questions
- Mechanical Technician Interview Questions
- Instrumentation Technician Interview Questions
- Operator Interview Questions
- Hvac Technician Interview Questions
- Electrical Maintenance Technician Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
Citroën Repair Technician Reviews and Ratings
based on 1 review
Rating in categories
|
Relationship Manager
6
salaries
|  ₹3.6 L/yr - ₹4.6 L/yr |
|
Sales Executive
5
salaries
| ₹2 L/yr - ₹3.1 L/yr |
|
Service Advisor
5
salaries
| ₹3 L/yr - ₹3.5 L/yr |
|
Deputy Manager
4
salaries
| ₹12.6 L/yr - ₹16.5 L/yr |
|
Senior Sales Executive
4
salaries
| ₹2.5 L/yr - ₹3.3 L/yr |
Maruti Suzuki
Tata Motors
Mahindra & Mahindra
Hyundai Motor India Limited
Calculate your in-hand salary
- Home >
- Interviews >
- Citroën Interview Questions >
- Citroën Repair Technician Interview Questions
