AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Cera Sanitaryware Senior Production Engineer Interview Questions, Process, and Tips for Experienced
Cera Sanitaryware Senior Production Engineer Interview Experiences for Experienced
1 interview found
Anonymous
Selected
I applied via Recruitment Consulltant and was interviewed in Nov 2022. There were 3 interview rounds.
(7 Questions)
- Q1. Type of casting defect and it's solution.
- Ans.
Shrinkage defect caused by improper cooling. Solution is to increase cooling rate or add risers.
Shrinkage defect occurs due to improper cooling causing the metal to shrink and leave voids in the casting.
Solution is to increase cooling rate or add risers to provide additional molten metal to compensate for the shrinkage.
Other types of casting defects include porosity, cold shuts, misruns, and hot tears.
Porosity is cause...
- Q2. Getting design and die devlopment .
- Q3. Degassing process and why it's necessary.
- Ans.
Degassing is the process of removing dissolved gases from liquids to prevent defects and improve product quality.
Dissolved gases can cause defects in products such as bubbles or porosity.
Degassing is commonly used in the production of metals, plastics, and electronics.
Methods of degassing include vacuum degassing, sparging, and membrane degassing.
Degassing can also improve the shelf life and taste of food and beverages...
- Q4. Die casting process parameters and it's calculation.
- Ans.
Die casting process parameters include temperature, pressure, and cycle time.
Temperature: affects the fluidity of the metal and the quality of the casting.
Pressure: determines the filling speed and the density of the casting.
Cycle time: affects the productivity and the quality of the casting.
Calculation involves determining the optimal values for each parameter based on the specific alloy and part design.
Factors such a...
- Q5. Mejor improvement project.
- Q6. Shrinkage defect and it's prevention process.
- Ans.
Shrinkage defect is a common casting defect caused by the solidification of metal.
Shrinkage defect occurs when the metal solidifies and shrinks before filling the entire mold cavity.
It can be prevented by increasing the pouring temperature, using risers, and modifying the mold design.
Proper gating and venting can also help prevent shrinkage defects.
Examples of shrinkage defects include shrinkage porosity and shrinkage
- Q7. HPDC pressure and velocity calculation.
(1 Question)
- Q1. Why do you want to change this job.
- Ans.
Looking for new challenges and opportunities to grow professionally.
Seeking a more challenging role that aligns with my career goals
Interested in exploring new technologies and industries
Want to work in a more collaborative and innovative environment
Looking for better work-life balance and career advancement opportunities
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
I applied via Naukri.com and was interviewed before Mar 2021. There were 4 interview rounds.
Technical questions related to domain.
(1 Question)
- Q1. What is carbonation.
- Ans.
Carbonation is the process of dissolving carbon dioxide gas in a liquid.
Occurs naturally in carbonated mineral water
Used in the production of carbonated beverages
Can affect the pH of a liquid
Can cause corrosion in concrete structures
(6 Questions)
- Q1. What is your family background?
- Q2. What are your salary expectations?
- Q3. Why should we hire you?
- Q4. Why are you looking for a change?
- Q5. What are your strengths and weaknesses?
- Q6. Tell me about yourself.
Pratical test by Auto level.
Interview Preparation Tips
Interview Questionnaire
1 Question
- Q1. What is your salary expectation -?
I applied via Referral and was interviewed before Oct 2020. There were 3 interview rounds.
Interview Questionnaire
3 Questions
- Q1. Past Experience as stated on my resume.
- Q2. Different maintenance related problems faced and solutions provided
- Ans.
Maintenance problems and solutions
Equipment breakdowns - regular maintenance checks and repairs
Lack of spare parts - inventory management and ordering in advance
Inefficient processes - process optimization and automation
Safety hazards - regular safety inspections and training
Environmental concerns - proper disposal of hazardous waste
Budget constraints - prioritization and cost-effective solutions
- Q3. Project related in depth questions on domain of my working as stated iny resume
Interview Preparation Tips
Be confident and do not over explain as all of the persons taking interviews in JSW Cement are rich in experience of their domain.
Interview Questionnaire
3 Questions
- Q1. Tell me about urself,
- Q2. Site related questions like silo slip form details, piling details.
- Q3. Achievements in short
I applied via Approached by Company and was interviewed in Jan 2022. There were 2 interview rounds.
(2 Questions)
- Q1. HMB of Pyro (section wise). Quality parameters (basic idea). Shutdown work progress activity steps (complying safety norms). Statutory norms by SPCB or CPCB for cement industry. Pressure drop across cyclon...
- Q2. Power optimization strategic initiatives or plans.
(1 Question)
- Q1. Salary expectations and why joining their organisation.
Interview Preparation Tips
Selected
I appeared for an interview before Feb 2024.
(5 Questions)
- Q1. Personal questions
- Q2. VFD principals and applications
- Q3. Weighing system
- Q4. DCS system
- Q5. Plant architecture
Comprehensive, non comprehensive questions and moral questions
Interview Preparation Tips
SOURAV DAS
Selected
I applied via Job exchange and was interviewed before Nov 2022. There were 4 interview rounds.
(1 Question)
- Q1. Dept. Question are asked regarding experience.
Technical questions/screen test
(1 Question)
- Q1. Salary negotiation
Interview Preparation Tips
Selected
I applied via Indeed and was interviewed in Jul 2023. There were 2 interview rounds.
(2 Questions)
- Q1. Erection of the cement mill
- Ans.
The erection of a cement mill involves the installation and assembly of the mill equipment and machinery.
The cement mill is typically a large cylindrical structure where raw materials are ground into fine powder.
The erection process includes the installation of the mill shell, liners, diaphragm, and grinding media.
Proper alignment and leveling of the mill components are crucial for efficient operation.
Electrical and me...
- Q2. Procedure of erection
- Ans.
The procedure of erection involves the process of assembling and installing structural components to create a stable and functional structure.
Planning and preparation
Site preparation and foundation
Assembly of structural components
Installation of utilities and systems
Finishing and testing
Final inspection and handover
(1 Question)
- Q1. Planning of the erection
- Ans.
Planning of the erection involves creating a detailed plan for the construction process.
Identify the scope and objectives of the project
Determine the sequence of activities and their dependencies
Allocate resources and manpower
Create a schedule and timeline
Consider safety measures and risk management
Coordinate with other teams and stakeholders
Monitor progress and make adjustments as necessary
Selected
I appeared for an interview before Jan 2023.
(1 Question)
- Q1. Cement test , cement manufacturers
Technical, English, reasoning
(1 Question)
- Q1. Design mix, types of cracks
(1 Question)
- Q1. Market potential
- Ans.
The market potential for the Senior Engineer role is high due to increasing demand for skilled professionals in the industry.
Growing demand for senior engineers in various industries
Increasing adoption of technology and digital transformation
Emerging markets and new opportunities
Expanding job market and career growth prospects
Cera Sanitaryware Interview FAQs
Tell us how to improve this page.
Cera Sanitaryware Interviews By Designations
- Cera Sanitaryware Market Research Analyst Interview Questions
- Cera Sanitaryware Senior Supervisor Interview Questions
- Cera Sanitaryware Assistant Manager Interview Questions
- Cera Sanitaryware Technical Support Engineer Interview Questions
- Cera Sanitaryware Engineer Interview Questions
- Cera Sanitaryware Design Engineer Interview Questions
- Cera Sanitaryware Summer Intern Interview Questions
- Cera Sanitaryware Regional Sales Manager Interview Questions
- Show more
Interview Questions for Popular Designations
- Production Engineer Interview Questions
- Production Supervisor Interview Questions
- Production Manager Interview Questions
- Production Officer Interview Questions
- Executive Production Interview Questions
- Production Interview Questions
- Production Chemist Interview Questions
- Production Operator Interview Questions
- Show more
Cera Sanitaryware Senior Production Engineer Interview Process for Experienced
based on 1 interview
Interview experience
Interview Questions from Similar Companies
|
Assistant Manager
148
salaries
|  ₹4.5 L/yr - ₹12.4 L/yr |
|
Sales Executive
64
salaries
| ₹2.4 L/yr - ₹7.2 L/yr |
|
Deputy Manager
54
salaries
| ₹8.1 L/yr - ₹14 L/yr |
|
Sales Officer
42
salaries
| ₹1.8 L/yr - ₹5.3 L/yr |
|
Senior Executive
36
salaries
| ₹4.2 L/yr - ₹9.2 L/yr |
JK Cement
ACC
Ambuja Cements
Nuvoco Vistas
- Home >
- Interviews >
- Cera Sanitaryware Interview Questions >
- Cera Sanitaryware Senior Production Engineer Interview Questions for Experienced
