AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Carrier Midea Diploma Trainee Engineer Interview Questions, Process, and Tips
Carrier Midea Diploma Trainee Engineer Interview Experiences
1 interview found
Selected
I applied via Approached by Company and was interviewed before Dec 2022. There were 2 interview rounds.
(4 Questions)
- Q1. How to check compressor is okey??
- Ans.
Check compressor by monitoring performance, inspecting for leaks, and listening for unusual noises.
Monitor performance by checking pressure levels and temperature readings.
Inspect for leaks by using a soap solution to detect air bubbles.
Listen for unusual noises such as knocking or rattling sounds.
Check for proper lubrication and ensure all connections are secure.
Inspect the compressor motor for any signs of overheatin
- Q2. Explain VCR'S cycle with diagram?
- Ans.
VCR's cycle involves recording and playback of video content using magnetic tape.
VCR records video content onto magnetic tape during the recording phase
During playback, the recorded video content is read from the tape and displayed on the screen
The cycle involves the user inserting a tape, recording content, and then playing back the recorded content
VCR's cycle can be represented in a diagram showing the flow of record
- Q3. What is the reason of machine not work properly cooling?
- Ans.
The machine may not work properly due to issues with the cooling system, such as low refrigerant levels or a malfunctioning compressor.
Low refrigerant levels can lead to inadequate cooling capacity
A malfunctioning compressor can result in poor cooling performance
Blocked air filters or condenser coils can restrict airflow and reduce cooling efficiency
- Q4. There are some reason of no cooling in machine. 1. Dust in Evaporator Coil 2. No Refrigerant found in Unit 3. Do not pumping Compressor properly 4. Chocked expansion Valve
- Ans.
Possible reasons for no cooling in a machine include dust in evaporator coil, lack of refrigerant, improper compressor pumping, and a chocked expansion valve.
Check for dust accumulation in the evaporator coil and clean if necessary
Inspect for any leaks or lack of refrigerant in the unit
Ensure the compressor is functioning properly and pumping refrigerant effectively
Check for any blockages or issues with the expansion v
Top trending discussions
Interview questions from similar companies
Senior Engineer Interview Questions & Answers
TDK India Private Limited
Anonymous
posted on 22 Apr 2021
I applied via Naukri.com and was interviewed in Oct 2020. There were 4 interview rounds.
Interview Questionnaire
1 Question
- Q1. I can not disclose the questions but definitely it was a level up than I expected
Interview Preparation Tips
Selected
I applied via Company Website and was interviewed in Jan 2024. There were 2 interview rounds.
(2 Questions)
- Q1. Questions about memory segments and compiler optimisations
- Q2. Question about controller architecture
(1 Question)
- Q1. Question about memory allocation of variables from a code snippet
Senior Engineer Interview Questions & Answers
TDK India Private Limited
Anonymous
posted on 23 May 2021
Interview Questionnaire
14 Questions
- Q1. 1. Why do you want to change your current job ?
- Q2. 2. What do you know about quality tools ?
- Ans.
Quality tools are techniques used to ensure quality in a product or service.
Quality control charts
Pareto charts
Fishbone diagrams
Histograms
Control charts
Scatter diagrams
Statistical process control
- Q3. What is your biggest professional achievement so far ?
- Q4. Tell my that why a histogram is used....and what is frequency and interval in histogram?
- Ans.
A histogram is used to represent the distribution of numerical data. Frequency is the number of occurrences and interval is the range of values.
Histograms are useful for visualizing data and identifying patterns.
Frequency refers to the number of times a value appears in the data set.
Interval refers to the range of values that are grouped together in the histogram.
Histograms are commonly used in statistics, finance, and...
- Q5. If we do rework of any produced part, which factors get affected by this of OEE?
- Ans.
Rework of produced parts affects the factors of Overall Equipment Efficiency (OEE).
Rework increases the time required to produce a part, reducing the availability factor of OEE.
Rework increases the number of defects, reducing the quality factor of OEE.
Rework increases the amount of scrap or waste, reducing the performance factor of OEE.
Rework can lead to increased downtime for equipment setup and adjustments, reducing ...
- Q6. What is Autonomous maintenance ?
- Ans.
Autonomous maintenance is a maintenance approach where operators take responsibility for routine maintenance tasks.
Operators are trained to perform routine maintenance tasks
Operators conduct inspections and minor repairs
Autonomous maintenance reduces downtime and improves equipment reliability
It also frees up maintenance staff to focus on more complex tasks
- Q7. Why do companies are going for having TPM ?
- Ans.
Companies are going for TPM to improve productivity, reduce downtime, and increase efficiency.
TPM helps in identifying and eliminating equipment failures before they occur
It ensures that equipment is maintained properly and in a timely manner
TPM also helps in reducing the need for emergency repairs and downtime
It improves overall equipment effectiveness and reduces costs
Companies that have implemented TPM have seen sig...
- Q8. Why do you want to relocate ?
- Q9. What is SPC, and what is Cp and Cpk ?
- Ans.
SPC stands for Statistical Process Control. Cp and Cpk are statistical tools used to measure process capability.
SPC is a method of monitoring and controlling a process to ensure it is operating within acceptable limits.
Cp is a measure of how well the process is centered between the upper and lower specification limits.
Cpk is a measure of how well the process is capable of producing within the specification limits.
Cp an...
- Q10. How to calculate OEE?
- Ans.
OEE can be calculated by multiplying Availability, Performance, and Quality percentages.
Calculate Availability by dividing Operating Time by Planned Production Time.
Calculate Performance by dividing Actual Production by Maximum Production.
Calculate Quality by dividing Good Units by Total Units Produced.
Multiply Availability, Performance, and Quality percentages to get OEE.
- Q11. What ardvthe major losses that affects OEE?
- Ans.
Major losses affecting OEE include availability, performance, and quality losses.
Availability losses occur when equipment is not running due to breakdowns, changeovers, or lack of materials.
Performance losses occur when equipment is running below its maximum speed or efficiency.
Quality losses occur when defective products are produced and need to be scrapped or reworked.
Other losses may include startup and shutdown los...
- Q12. What is IATF stands for and what is its current revised name ?
- Ans.
IATF stands for International Automotive Task Force and its current revised name is IATF 16949:2016.
IATF stands for International Automotive Task Force
Its current revised name is IATF 16949:2016
- Q13. What is capacitor and where it is being used ?
- Ans.
A capacitor is an electronic component that stores electrical energy in an electric field. It is used in various electronic circuits.
Capacitors are used to filter out noise and stabilize voltage in power supplies.
They are used in timing circuits, oscillators, and filters.
Capacitors are also used in audio equipment to filter out unwanted frequencies.
They can be found in electronic devices such as TVs, computers, and sma...
- Q14. Why do you prefer working in production dept.?
Senior Engineer Interview Questions & Answers
TDK India Private Limited
Anonymous
posted on 15 Sep 2021
I applied via Naukri.com and was interviewed in Aug 2021. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Kaizen,cycletime,jh,throughput time,owe etc
Interview Preparation Tips
And be confident.
I applied via Approached by Company and was interviewed in May 2022. There were 5 interview rounds.
(2 Questions)
- Q1. As infineon is Produc based company and Every Person Responsible for complete Chip Testing instead on 1 specific Block. so Interview Asked Basic Tests like continuity, DPS short , Vil/Vih , Voh/Vih , Lekag...
- Ans. Above all the Topics prepare clearly
- Q2. Basics of Tester Hardwares and why you join in INFIN ? Why want to Change the company ? Why should we we hire ? Tell me about any challenges faced in previous organisation and Work status ? Any protocol...
- Ans. These are Main topics you should good before going to attend the interview
(1 Question)
- Q1. Same as Previous Round but did by Manager in deep level on Basics and work
(1 Question)
- Q1. General Discussion about Works did in previous organisation and Basics
(1 Question)
- Q1. General Discussion and Salary Negotiation
Interview Preparation Tips
- Java, Basics of Engineering
Learn more skills that make your Resume more weight
Must and Should Revise and Review all the topics attached in Resume
If any One Call for scheduling Interview, ask for time min 2 Java and Max 1 week to Revise and Get ready with Full knowledge and confidence for interview.
Selected
I applied via Company Website and was interviewed before Jan 2023. There were 2 interview rounds.
Simple Python Coding questions.
(1 Question)
- Q1. Logical questions on Memory allocation.
Interview Preparation Tips
Selected
I applied via Approached by Company and was interviewed in Feb 2024. There were 3 interview rounds.
(2 Questions)
- Q1. What were your previous projects that you have worked on
- Ans.
I have worked on projects related to developing software for autonomous vehicles and implementing machine learning algorithms for predictive maintenance.
Developed software for autonomous vehicles to improve navigation and obstacle avoidance
Implemented machine learning algorithms for predictive maintenance in manufacturing plants
Collaborated with cross-functional teams to integrate new technologies into existing systems
- Q2. What all your technical skills and stacks that you have previously used for your projects
- Ans.
I have experience with Java, Python, SQL, AWS, Docker, and Kubernetes in my previous projects.
Java
Python
SQL
AWS
Docker
Kubernetes
(2 Questions)
- Q1. What is docker and why do we use it for containerising applications
- Ans.
Docker is a platform for developing, shipping, and running applications in containers.
Docker allows applications to be isolated in containers, making them portable and easy to deploy across different environments.
Containers share the host OS kernel but run as isolated processes, providing lightweight and efficient virtualization.
Docker simplifies the process of packaging applications and their dependencies, ensuring co...
- Q2. What is database normalisation and how your project benefited from it in the past
- Ans.
Database normalization is the process of organizing data in a database to reduce redundancy and improve data integrity.
Database normalization involves breaking down data into smaller, more manageable tables and defining relationships between them.
It helps in reducing data redundancy, improving data integrity, and making the database more efficient.
For example, in a project I worked on, we normalized the database by spl...
(2 Questions)
- Q1. What has been your experience with challenging projects
- Ans.
I have extensive experience working on challenging projects in various industries.
Led a team in developing a complex software solution for a major client
Managed a project with tight deadlines and limited resources
Implemented innovative solutions to overcome technical obstacles
Collaborated with cross-functional teams to deliver successful outcomes
- Q2. How would you approach learning about new domain and technologies with a different background
- Ans.
I would approach learning about new domain and technologies with a different background by leveraging my existing skills, seeking out resources, and collaborating with experts in the field.
Identify key concepts and terminology in the new domain
Seek out online courses, tutorials, and books to gain foundational knowledge
Collaborate with colleagues or mentors who have experience in the new domain
Experiment with hands-on p...
Interview Preparation Tips
- IT Projects
- Python
- Reactjs
- Django
- Databases
Skills evaluated in this interview
Selected
I applied via Referral and was interviewed before Jul 2022. There were 3 interview rounds.
(1 Question)
- Q1. Questions about Thermal basics. JD also about melting point temperatures
(1 Question)
- Q1. Salary negotiations and joining date details
Vaibhav Gupta
I applied via Company Website and was interviewed before May 2023. There was 1 interview round.
Questions related to digital and Analog electronics were asked
Carrier Midea Interview FAQs
Tell us how to improve this page.
Carrier Midea Interviews By Designations
- Carrier Midea Area Service Manager Interview Questions
- Carrier Midea Project Intern Interview Questions
- Carrier Midea Graduate Engineer Interview Questions
- Carrier Midea Branch Manager Interview Questions
- Carrier Midea Regional Manager North Interview Questions
- Carrier Midea Data Entry Operator Interview Questions
- Carrier Midea Store Incharge Interview Questions
- Carrier Midea Area Sales Manager Interview Questions
- Show more
Interview Questions for Popular Designations
- Diploma Mechanical Engineer Interview Questions
- Diploma Electrical Engineer Interview Questions
- Diploma Apprentice Trainee Interview Questions
- Diploma Electronics Engineer Interview Questions
- Diploma Chemical Engineer Interview Questions
- Diploma Civil Engineer Interview Questions
- Diploma Engineer Trainee - DET Interview Questions
- Diploma Automobile Engineer Interview Questions
- Show more
Carrier Midea Diploma Trainee Engineer Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
Carrier Midea Diploma Trainee Engineer Reviews and Ratings
based on 9 reviews
Rating in categories
|
Diploma Trainee Engineer
45
salaries
|  ₹1.5 L/yr - ₹2.5 L/yr |
|
Assistant Manager
36
salaries
| ₹6 L/yr - ₹14 L/yr |
|
Area Sales Manager
33
salaries
| ₹5 L/yr - ₹17.5 L/yr |
|
Senior Executive
30
salaries
| ₹5.1 L/yr - ₹10 L/yr |
|
Quality Engineer
24
salaries
| ₹1.7 L/yr - ₹6 L/yr |
Apar Industries
TDK India Private Limited
Molex
Micron Technology
- Home >
- Interviews >
- Carrier Midea Interview Questions >
- Carrier Midea Diploma Trainee Engineer Interview Questions
