Filter interviews by
I applied via Recruitment Consulltant and was interviewed in Mar 2023. There were 3 interview rounds.
The candidate is asked about their experience in the oil field, Clint, current workplace, years of Gulf experience, blasting experience, rope access experience, long hours, and fluency in English.
Clint refers to the client or company the candidate worked for in the oil field.
Current workplace should be mentioned with details.
Years of Gulf experience should be specified.
Blasting experience should be described if applica...
English red and write test
Top trending discussions
I have worked on various DCS architectures in my career, including those for chemical plants and power plants.
Designed and implemented DCS architecture for a chemical plant project
Developed DCS architecture for a power plant project
Worked on DCS architecture for a water treatment plant project
Collaborated with team to create DCS architecture for a pharmaceutical plant project
I applied via Recruitment Consultant and was interviewed before Oct 2017. There were 3 interview rounds.
The basic hydraulic system consists of various valves and pumps that work together to control fluid flow and pressure.
Valves in a hydraulic system control the direction, flow rate, and pressure of the fluid.
Examples of valves include check valves, relief valves, and control valves.
Pumps in a hydraulic system generate the flow and pressure of the fluid.
Examples of pumps include gear pumps, vane pumps, and piston pumps.
H...
I applied via Campus Placement and was interviewed before Jan 2021. There were 6 interview rounds.
Boomer is a hydraulic drilling rig used in mining and construction industries.
Boomer is a versatile drilling rig that can be used for drilling holes of different sizes and depths.
It is equipped with a hydraulic system that powers the drilling mechanism.
Boomer is commonly used in mining and construction industries for drilling tunnels, shafts, and blast holes.
It can be operated by a single person or a team of operators ...
I applied via Walk-in and was interviewed before Apr 2021. There was 1 interview round.
I applied via Naukri.com and was interviewed before Jan 2021. There were 3 interview rounds.
posted on 20 Feb 2021
I applied via Recruitment Consultant and was interviewed in Feb 2021. There were 3 interview rounds.
Clutches are devices used to transmit power from one component to another. There are several types of clutches.
Friction clutch
Electromagnetic clutch
Hydraulic clutch
Centrifugal clutch
Dog clutch
Cone clutch
Multi-plate clutch
A clutch is a mechanical device that engages and disengages power transmission between two rotating shafts.
Clutches are commonly used in vehicles to allow the engine to start and stop without turning off the transmission.
They are also used in machines to control the power output and speed.
Clutches can be operated manually or automatically.
There are different types of clutches, including friction clutches, hydraulic clu...
My travel experience with TUV SUD has been extensive, focusing on various projects and client engagements across different regions.
Traveled to multiple countries for client audits, including Germany and the USA.
Participated in training sessions in Asia to enhance team skills.
Attended industry conferences in Europe to stay updated on regulations.
I applied via Naukri.com and was interviewed in Dec 2022. There were 2 interview rounds.
I am a highly skilled and experienced Project Engineer with a strong background in managing complex engineering projects.
Over 10 years of experience in project management and engineering
Proficient in utilizing project management software and tools
Strong leadership and communication skills
Proven track record of successfully delivering projects on time and within budget
Experience in coordinating with cross-functional tea...
I have worked on various projects in my previous company, including the construction of a new office building and the implementation of a software system for project management.
Construction of a new office building
Implementation of a software system for project management
The lifecycle of a project refers to the stages it goes through from initiation to closure.
Initiation: project is defined and approved
Planning: project objectives, scope, and resources are determined
Execution: project plan is put into action
Monitoring and Control: project progress is tracked and necessary adjustments are made
Closure: project is completed and evaluated
Examples: construction of a building, development of...
Industrial communication protocols are standards for data exchange between devices in industrial automation and control systems.
Some common industrial communication protocols include Modbus, Profibus, DeviceNet, Ethernet/IP, and CANopen.
These protocols enable devices from different manufacturers to communicate with each other and exchange data.
Industrial communication protocols can be wired or wireless, and can operate...
MODBUS settings include baud rate, parity, data bits, stop bits, and slave address.
Baud rate determines the speed of communication between devices.
Parity is used for error checking and can be set to even, odd, or none.
Data bits determine the number of bits used to represent each character.
Stop bits indicate the end of a character and can be set to 1 or 2.
Slave address is used to identify the device on the network.
Examp...
The maximum speed in Modbus depends on the baud rate and cable length.
Modbus speed is measured in baud rate
Higher baud rates allow for faster data transfer
Cable length can also affect the maximum speed
For example, at 9600 baud rate, the maximum cable length is 1200 meters
The number of devices that can be added in Modbus depends on the network architecture and the number of available addresses.
The maximum number of devices that can be added to a Modbus network is 247.
The number of available addresses depends on the type of Modbus protocol used (RTU or TCP/IP).
The network architecture also plays a role in determining the number of devices that can be added.
It is important to ensure that ...
Modbus communication types include RTU, ASCII, and TCP/IP.
RTU (Remote Terminal Unit) is a serial communication protocol that uses binary code to transmit data.
ASCII (American Standard Code for Information Interchange) is a serial communication protocol that uses ASCII characters to transmit data.
TCP/IP (Transmission Control Protocol/Internet Protocol) is a network communication protocol that uses Ethernet to transmit d...
I have worked on multiple SCADA systems including Wonderware, Ignition, and Inductive Automation.
I have experience with configuring and programming SCADA systems
I have worked with Wonderware, Ignition, and Inductive Automation
I am familiar with creating HMI screens, alarms, and trends
I have experience with PLC communication and data acquisition
I have worked on projects in various industries including manufacturing and
The maximum input output handle refers to the maximum number of inputs and outputs that a device can handle.
The maximum input output handle varies depending on the device and its specifications.
It is important to consider the maximum input output handle when selecting a device for a project.
For example, a PLC may have a maximum input output handle of 256 inputs and 256 outputs.
Another example is a microcontroller with ...
The number of pages designed in HMI depends on the project requirements and complexity.
The number of pages can range from a few to hundreds depending on the project scope.
The complexity of the HMI design and functionality also affects the number of pages.
Factors such as user interface, data visualization, and system integration can impact the number of pages.
It is important to prioritize user experience and ease of nav
based on 1 interview
Interview experience
based on 2 reviews
Rating in categories
HSE Officer
29
salaries
| ₹5.2 L/yr - ₹16.5 L/yr |
Planning Engineer
14
salaries
| ₹6 L/yr - ₹20 L/yr |
Safety Officer
12
salaries
| ₹4 L/yr - ₹10.5 L/yr |
Scaffolding Supervisor
11
salaries
| ₹9.6 L/yr - ₹12 L/yr |
Supervisor
5
salaries
| ₹1 L/yr - ₹9 L/yr |
John Deere
Cummins
ABB
Tractors and Farm Equipment