Upload Button Icon Add office photos

Filter interviews by

Bonatti Mechanical Engineer Interview Questions, Process, and Tips

Updated 7 Mar 2023

Bonatti Mechanical Engineer Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Recruitment Consulltant and was interviewed before Mar 2022. There was 1 interview round.

Round 1 - Technical 

(10 Questions)

  • Q1. Installation turbo machine GE
  • Q2. Respect for safety and working time
  • Q3. Site protection of work equipment
  • Ans. 

    Site protection of work equipment is crucial for safety and efficiency.

    • Work equipment should be properly stored and secured when not in use.

    • Equipment should be regularly inspected for damage or wear and tear.

    • Safety guards and barriers should be installed to prevent accidents.

    • Employees should be trained on proper use and handling of equipment.

    • Emergency procedures should be in place in case of equipment failure or accide...

  • Answered by AI
  • Q4. Fasten seat belts in high places
  • Ans. 

    Fastening seat belts in high places requires proper equipment and safety measures.

    • Use appropriate safety harnesses and equipment to access high places

    • Ensure the seat belts are securely fastened to a stable structure

    • Regularly inspect and maintain the seat belts and equipment

    • Train personnel on proper safety procedures and equipment usage

    • Examples: construction sites, amusement park rides, aircraft maintenance

  • Answered by AI
  • Q5. Wear protection while entering the site
  • Ans. 

    Wear appropriate personal protective equipment (PPE) to enter the site.

    • Identify the hazards present on the site and select the appropriate PPE accordingly.

    • Ensure that the PPE is in good condition and fits properly.

    • Examples of PPE include hard hats, safety glasses, steel-toed boots, and high-visibility vests.

    • Follow all site-specific safety protocols and procedures.

    • Regularly inspect and maintain PPE to ensure continued e

  • Answered by AI
  • Q6. Provide tasks required by the work supervisor
  • Q7. Respect the imposed working hours
  • Q8. Work with precision and high results
  • Q9. Alert workers in dangerous places
  • Ans. 

    Alert workers in dangerous places

    • Install warning signs

    • Provide safety training

    • Use loudspeakers or alarms

    • Implement emergency response plan

  • Answered by AI
  • Q10. Attention strictly on site

Interview Preparation Tips

Topics to prepare for Bonatti Mechanical Engineer interview:
  • Wahtsap
  • Skype
Interview preparation tips for other job seekers - Interested in work and respect in the workplace and workers

Interview questions from similar companies

I was interviewed before Jul 2016.

Interview Preparation Tips

Round: Group Discussion
Duration: 4 hours 5 minutes

Round: Test
Duration: 2 hours 5 minutes

I applied via Naukri.com and was interviewed before Nov 2019. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. Basics related to piperack design
  • Q2. Design parameters for steel structure
  • Ans. 

    Design parameters for steel structure

    • Load capacity and distribution

    • Material strength and durability

    • Environmental factors such as wind and seismic activity

    • Connection details and joint design

    • Fire resistance and protection measures

  • Answered by AI
  • Q3. Number of years exposure to staad
  • Ans. 

    I have 5 years of exposure to STAAD software.

    • I have used STAAD for various structural analysis and design projects.

    • I am proficient in using STAAD for modeling, analysis, and design of steel and concrete structures.

    • I have experience in using STAAD for seismic analysis and design of structures.

    • I have also used STAAD for foundation design and analysis.

    • I keep myself updated with the latest versions and features of STAAD so

  • Answered by AI
  • Q4. Grating design and deflection limits

Interview Preparation Tips

Interview preparation tips for other job seekers - Be positive & confident

I applied via Referral and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical questions relating to our job in deep. That's it

Interview Preparation Tips

Interview preparation tips for other job seekers - Whatever you know about say genuinely and be confident always. Don't hesitate at all.
Put your thoughts clearly.

I applied via Recruitment Consultant and was interviewed in Apr 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. About HT/LT,Motor/Feeder & Substation Errection & Commission.

Interview Preparation Tips

Interview preparation tips for other job seekers - Good Questions Are Asked.

I applied via Approached by Company and was interviewed in Oct 2018. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Baching plant Rmu Tamrock Shotcrete machine Grouting pumps Layout of project Crusher plant
  • Q2. Why you want to join Why you want to leave Why we hire you
  • Ans. 

    I want to join to further develop my skills, seeking new challenges. I am leaving for career growth opportunities. You should hire me for my experience and expertise.

    • Seeking new challenges and opportunities for skill development

    • Leaving for career growth and advancement

    • Experience and expertise in the field

    • Ability to contribute effectively to the team and projects

  • Answered by AI

Interview Preparation Tips

General Tips: Be positive
Be prepared
Be calm
Don't be stressed


Skills: Communication, Problem Solving, Leadership, Time Management
Duration: <1 week

I applied via Naukri.com and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Write the equation for dynamics and wave spectra equations. I do not remember questions as it is 3 years back.

Interview Preparation Tips

Interview preparation tips for other job seekers - This happened in Technip FMC Hyderabad, India. I hold 10 years experience. Interviewers don not know what to get from the candidates. The panel tried to prove within themselves that can ask difficult questions. The even entered to doctorate level questions which is not valid for performing job. Finally, I conclude that they performed some time-pass session.

I applied via Campus Placement and was interviewed before Nov 2020. There were 3 interview rounds.

Interview Questionnaire 

6 Questions

  • Q1. What is gear and its types?
  • Ans. 

    Gears are mechanical components that transmit power and motion between rotating shafts. There are various types of gears.

    • Spur gears are the most common type and have straight teeth.

    • Helical gears have angled teeth and provide smoother operation.

    • Bevel gears transmit power between shafts that are not parallel.

    • Worm gears have a screw-like thread and are used for high reduction ratios.

    • Planetary gears have a central gear tha...

  • Answered by AI
  • Q2. Describe stress and strain with its diagram?
  • Ans. 

    Stress is the force applied per unit area, while strain is the deformation caused by stress.

    • Stress is measured in units of force per unit area, such as pounds per square inch (psi) or newtons per square meter (N/m²).

    • Strain is the ratio of the change in length or shape of an object to its original length or shape.

    • Stress and strain are related by the material's modulus of elasticity, which is a measure of how much the ma...

  • Answered by AI
  • Q3. How Bauxite convert into aluminium?(accordingly my internship during b.tech)
  • Q4. What is centrifugal pump and its types?
  • Ans. 

    A centrifugal pump is a mechanical device that uses centrifugal force to transport fluids. There are two types: radial and axial.

    • Centrifugal pumps are commonly used in industrial and domestic applications.

    • Radial pumps have a volute casing and are used for low flow and high head applications.

    • Axial pumps have a propeller and are used for high flow and low head applications.

    • Centrifugal pumps are easy to install and mainta...

  • Answered by AI
  • Q5. What is SI and CI engine?
  • Ans. 

    SI and CI engines are types of internal combustion engines used in vehicles and machinery.

    • SI engine stands for Spark Ignition engine, also known as gasoline engine.

    • CI engine stands for Compression Ignition engine, also known as diesel engine.

    • SI engines use a spark plug to ignite the fuel-air mixture, while CI engines use compression to ignite the fuel.

    • SI engines are commonly used in cars, motorcycles, and small machine...

  • Answered by AI
  • Q6. What is knocking?
  • Ans. 

    Knocking is a phenomenon where the air-fuel mixture in the engine cylinder ignites spontaneously before the spark plug fires.

    • Knocking is also known as detonation or pinging.

    • It can cause engine damage if not addressed.

    • It occurs when the air-fuel mixture in the cylinder ignites prematurely due to high pressure and temperature.

    • It can be caused by low-quality fuel, incorrect ignition timing, or engine overheating.

    • To preven...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was technical one and lasted for 25 minutes.The interviewer wanted to test both my knowledge and communication skill.It was my first off-campus interview and i think i did pretty well as a fresher. You need to stay calm and should apply presence of mind. you should very clear about your previous (durring b.tech) project. Ty

I applied via Walk-in and was interviewed in Aug 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. ELSR MEANS

Interview Preparation Tips

Interview preparation tips for other job seekers - Elevated service level Reservoir

Interview Questionnaire 

3 Questions

  • Q1. PSC girder
  • Q2. Minor bridge
  • Q3. Related

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

Bonatti Interview FAQs

How many rounds are there in Bonatti Mechanical Engineer interview?
Bonatti interview process usually has 2 rounds. The most common rounds in the Bonatti interview process are Resume Shortlist and Technical.
What are the top questions asked in Bonatti Mechanical Engineer interview?

Some of the top questions asked at the Bonatti Mechanical Engineer interview -

  1. Wear protection while entering the s...read more
  2. Fasten seat belts in high pla...read more
  3. Site protection of work equipm...read more

Tell us how to improve this page.

Bonatti Mechanical Engineer Interview Process

based on 1 interview

Interview experience

3
  
Average
View more

Bonatti Mechanical Engineer Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

3.0

Salary

4.0

Job security

4.0

Company culture

4.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Mechanical Technician
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Electrical Engineer
3 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Electrical Supervisor
3 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Instrumentation Technician
3 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Bonatti with

L&T Energy Hydrocarbon

3.8
Compare

TechnipFMC

4.0
Compare

Saipem

4.1
Compare

Punj Lloyd

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview