Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by BAXY Team. If you also belong to the team, you can get access from here

BAXY Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

BAXY Quality Controller Interview Questions and Answers

Updated 16 Oct 2023

BAXY Quality Controller Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(6 Questions)

  • Q1. Responsibility towards the company
  • Q2. About the work that has been done
  • Q3. About the work that has been
  • Q4. If work hard you will be
  • Q5. About the work that has been done
  • Q6. Work hard you will be

Interview Preparation Tips

Interview preparation tips for other job seekers - Quality control

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I was interviewed in Dec 2024.

Round 1 - One-on-one 

(6 Questions)

  • Q1. Self introduction
  • Q2. What is pH?
  • Ans. 

    pH is a measure of the acidity or alkalinity of a solution on a scale of 0 to 14.

    • pH stands for 'potential of Hydrogen'

    • It measures the concentration of hydrogen ions in a solution

    • A pH of 7 is considered neutral, below 7 is acidic, and above 7 is alkaline

    • Examples: Lemon juice has a pH of around 2, while baking soda has a pH of around 9

  • Answered by AI
  • Q3. What is ultraviolet (UV) spectroscopy, and how does it work?
  • Ans. 

    UV spectroscopy is a technique used to analyze the absorption and transmission of ultraviolet light by a sample.

    • UV spectroscopy involves measuring the absorbance of ultraviolet light by a sample.

    • It works based on the principle that molecules absorb UV light at specific wavelengths.

    • The amount of absorption is proportional to the concentration of the absorbing species in the sample.

    • UV spectroscopy is commonly used in pha...

  • Answered by AI
  • Q4. What is UV?
  • Ans. 

    UV stands for ultraviolet, a type of electromagnetic radiation with a wavelength shorter than that of visible light.

    • UV radiation is commonly emitted by the sun and can cause damage to skin and eyes.

    • UV radiation is categorized into UVA, UVB, and UVC based on wavelength.

    • UV light is used in various applications such as sterilization, tanning beds, and counterfeit detection.

  • Answered by AI
  • Q5. What is fingerprint region?
  • Ans. 

    Fingerprint region refers to a specific range of frequencies in an infrared spectrum that is unique to a particular molecule.

    • Fingerprint region is typically between 1500-500 cm^-1 in an IR spectrum.

    • It is used for identifying functional groups in organic molecules.

    • Each molecule has a unique fingerprint region due to its unique molecular structure.

  • Answered by AI
  • Q6. Tell me a range of UV spectroscopy
  • Ans. 

    UV spectroscopy measures the absorption of ultraviolet (UV) light by a sample.

    • UV spectroscopy is used to analyze the electronic transitions in molecules.

    • It is commonly used in pharmaceuticals, environmental monitoring, and material science.

    • UV spectroscopy typically ranges from 190 to 400 nm.

    • The Beer-Lambert law is often applied in UV spectroscopy to quantify the concentration of a sample.

    • UV spectroscopy can be used to ...

  • Answered by AI
Round 2 - HR 

(6 Questions)

  • Q1. Can you provide a self-introduction?
  • Ans. 

    I am a detail-oriented Quality Controller with a strong background in ensuring product quality and compliance.

    • Experienced in conducting quality inspections and audits

    • Skilled in identifying and resolving quality issues

    • Proficient in implementing quality control procedures

    • Strong attention to detail and accuracy

    • Excellent communication and problem-solving skills

  • Answered by AI
  • Q2. Are you proficient in the Hindi language?
  • Ans. 

    Yes, I am proficient in the Hindi language.

    • Fluent in speaking, reading, and writing Hindi

    • Can effectively communicate with Hindi-speaking team members

    • Have experience in translating documents from Hindi to English

    • Comfortable with using Hindi terminology in quality control processes

  • Answered by AI
  • Q3. Can you discuss the projects you completed during your college studies?
  • Ans. 

    During my college studies, I completed several projects related to quality control in manufacturing processes.

    • Developed a quality control plan for a manufacturing company to ensure product consistency and compliance with industry standards

    • Conducted statistical analysis on production data to identify areas for improvement and reduce defects

    • Implemented Six Sigma methodologies to optimize processes and minimize waste

    • Colla...

  • Answered by AI
  • Q4. Why cipla?
  • Q5. Tell me about your education
  • Ans. 

    I have a Bachelor's degree in Quality Management from XYZ University.

    • Bachelor's degree in Quality Management

    • Specialized coursework in quality control techniques

    • Hands-on experience with quality control processes

    • Continuous learning and professional development in the field

  • Answered by AI
  • Q6. Tell me about your family
  • Ans. 

    I come from a close-knit family of five, including my parents, my older sister, and my younger brother.

    • I have a supportive and loving family who have always encouraged me to pursue my goals.

    • We enjoy spending quality time together, whether it's going on family vacations or simply having dinner at home.

    • My parents have been a great source of inspiration for me, instilling values of hard work and dedication.

    • My siblings and...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Dec 2023. There were 3 interview rounds.

Round 1 - Assignment 

This time I am fresher now and my first assignment was identification and isolation of microbial flora in sugarcane juices

Round 2 - Group Discussion 

I am hardworking girl I always face lots of problems in my family and I mentally strong all well prepared to face all types of problems

Round 3 - Technical 

(1 Question)

  • Q1. Education aspects, behavioural aspects, situational aspects
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is sop and uv
  • Ans. 

    SOP stands for Standard Operating Procedure and UV stands for Ultraviolet.

    • SOP is a set of step-by-step instructions compiled by an organization to help workers carry out routine operations.

    • UV refers to the ultraviolet light spectrum, commonly used for sterilization and disinfection purposes.

    • SOP ensures consistency and quality in processes, while UV light kills bacteria and viruses.

    • Example: Following an SOP for packagin...

  • Answered by AI
  • Q2. Personal introduction
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

It's only dedicated to interviewed and candidate bonding

Round 3 - Technical 

(2 Questions)

  • Q1. Which is strong subject and some questions in this
  • Q2. Speek about your introduction speak your degree college university tell him your patience and attitude.what is safety.tatasteel manufacturing process.tatasteel road safety.tatasteel Quality.
Round 4 - Technical 

(1 Question)

  • Q1. Based the subject and predicate
Round 5 - HR 

(1 Question)

  • Q1. Finally meet and discuss about which affordable sallery

Interview Preparation Tips

Interview preparation tips for other job seekers - Frist off all all candidates is must carry your supporting documents and a formal dress it's and confidance level is high then you start your introduction and face to face review.dont panic or don't lose your weakness best shortest ans and right to carry the job .all the best

I applied via Campus Placement and was interviewed in Apr 2022. There was 1 interview round.

Round 1 - HR 

(8 Questions)

  • Q1. What is Standard Deviations ?
  • Ans. 

    Standard deviation is a measure of the amount of variation or dispersion of a set of values from the mean.

    • It is a statistical measure of variability.

    • It measures how spread out the data is from the mean.

    • It is calculated by taking the square root of the variance.

    • It is commonly used in quality control to ensure consistency and accuracy of products.

    • For example, if the standard deviation of a product's weight is high, it me...

  • Answered by AI
  • Q2. Tell me about yourself
  • Q3. Standard Deviation Formula
  • Ans. 

    Standard deviation formula measures the amount of variation or dispersion of a set of data values.

    • The formula is: square root of the sum of the squared differences between each data point and the mean, divided by the number of data points minus one.

    • It is used to determine the spread of data in a sample or population.

    • A high standard deviation indicates that the data points are spread out over a large range, while a low ...

  • Answered by AI
  • Q4. PDF of Normal Distribution
  • Ans. 

    PDF of Normal Distribution is a probability density function that describes the likelihood of a random variable taking a certain value.

    • The PDF of Normal Distribution is bell-shaped and symmetrical.

    • The area under the curve of the PDF is equal to 1.

    • The mean and standard deviation of the distribution determine the shape and location of the curve.

    • The PDF is used to calculate probabilities of events occurring within a certa

  • Answered by AI
  • Q5. Binomial distribution formula
  • Ans. 

    Binomial distribution formula is used to calculate the probability of a certain number of successes in a fixed number of trials.

    • The formula is P(x) = (nCx) * p^x * (1-p)^(n-x)

    • n is the total number of trials, x is the number of successes, p is the probability of success in a single trial

    • The formula can be used in various fields such as finance, biology, and engineering

    • Example: The probability of getting 3 heads in 5 coi...

  • Answered by AI
  • Q6. What is correlation?
  • Ans. 

    Correlation is a statistical measure that shows the relationship between two variables.

    • Correlation measures the strength and direction of the relationship between two variables.

    • It ranges from -1 to 1, where -1 indicates a perfect negative correlation, 0 indicates no correlation, and 1 indicates a perfect positive correlation.

    • Correlation does not imply causation.

    • For example, there may be a strong correlation between ice...

  • Answered by AI
  • Q7. What is quality control and what are it's uses?
  • Ans. 

    Quality control is the process of ensuring that products or services meet the desired level of quality.

    • It involves inspecting and testing products or services to identify defects or issues.

    • It helps to prevent defects and improve overall quality.

    • It can be used in various industries such as manufacturing, healthcare, and software development.

    • Examples include checking the accuracy of medical test results, testing the dura...

  • Answered by AI
  • Q8. Tell me about control charts ?
  • Ans. 

    Control charts are statistical tools used to monitor and control a process over time.

    • They help identify if a process is stable or unstable.

    • They plot data points over time and calculate control limits.

    • They can be used to detect and correct problems before they become serious.

    • Examples include X-bar and R charts, p-charts, and c-charts.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - These questions varies from stream to stream. If you are from statistics background. You just have to prepare some basic questions and try to impress them with your communication skill. These are my tips all the best guys...

Interview Questionnaire 

1 Question

  • Q1. Quality dept

Interview Questionnaire 

1 Question

  • Q1. About engine parts and it’s functioning

I applied via Approached by Company and was interviewed before May 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Quality 

(5 Questions)

  • Q1. There is transparent background and culture teammates are supported and encouraged to attend
  • Q2. There is a huge difference between the management doesn't address our issues
  • Q3. The management doesn't address our issues with Attitude
  • Q4. What is the management doesn't address is transparent background
  • Ans. 

    Transparent background is an important aspect of quality control and should be addressed by management.

    • Transparent background is crucial for certain industries such as graphic design and printing.

    • Lack of transparency can lead to errors in printing and design.

    • Management should ensure that all employees are aware of the importance of transparent backgrounds and provide necessary training.

    • Regular quality checks should be ...

  • Answered by AI
  • Q5. To connect with Attitude there is transparent background

Interview Preparation Tips

Interview preparation tips for other job seekers - There is a huge cafeteria and gaming arcade game of different roles within
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Group Discussion 

Allow for next round

Round 2 - HR 

(1 Question)

  • Q1. Why you want to join

BAXY Interview FAQs

How many rounds are there in BAXY Quality Controller interview?
BAXY interview process usually has 2 rounds. The most common rounds in the BAXY interview process are Resume Shortlist and Technical.

Tell us how to improve this page.

BAXY Quality Controller Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

BAXY Quality Controller Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

4.0

Skill development

5.0

Work-life balance

4.0

Salary

4.0

Job security

4.0

Company culture

4.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Assistant Engineer
123 salaries
unlock blur

₹2 L/yr - ₹4.3 L/yr

Senior Engineer
84 salaries
unlock blur

₹2 L/yr - ₹7.8 L/yr

Engineer
71 salaries
unlock blur

₹2 L/yr - ₹6.1 L/yr

Deputy Engineer
56 salaries
unlock blur

₹2 L/yr - ₹5.3 L/yr

Assistant Manager
51 salaries
unlock blur

₹5 L/yr - ₹11.8 L/yr

Explore more salaries
Compare BAXY with

Flipkart

4.0
Compare

Amazon

4.1
Compare

Paytm

3.3
Compare

Reliance Industries

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview