Filter interviews by
I applied via Approached by Company and was interviewed in Oct 2024. There was 1 interview round.
A boiler is a closed vessel in which water or other fluid is heated.
Boilers are used to generate steam or hot water for heating, processing, or power generation
They can be fueled by natural gas, oil, coal, or biomass
Boilers have various components such as burners, heat exchangers, and controls
Boiler in high temperature vapours can lead to increased pressure and potential safety hazards.
High temperature vapours in a boiler can cause the pressure to rise significantly.
This can lead to potential safety hazards such as explosions or leaks.
Proper monitoring and maintenance of the boiler is crucial to prevent accidents.
Examples of safety measures include regular inspections, proper ventilation, and emergency shut
I applied via Recruitment Consulltant and was interviewed in Nov 2024. There was 1 interview round.
I applied via Approached by Company and was interviewed in Jan 2024. There was 1 interview round.
PLC (Programmable Logic Controller) is a digital computer used for automation of electromechanical processes.
PLC receives input signals from sensors and switches
It processes the input signals based on the programmed logic
It controls the output devices such as motors, valves, and lights
PLC programming is done using ladder logic or other programming languages
Power factor is a measure of how effectively electrical power is being used in a circuit.
Power factor is the ratio of real power (kW) to apparent power (kVA) in a circuit.
It is a number between 0 and 1, with 1 indicating perfect efficiency.
Low power factor can result in increased energy costs and inefficient use of electrical equipment.
Power factor correction techniques, such as adding capacitors, can improve power fac...
Tests performed on motors include insulation resistance test, winding resistance test, vibration analysis, and current signature analysis.
Insulation resistance test checks for any breakdown in insulation
Winding resistance test measures the resistance of the motor windings
Vibration analysis detects any mechanical issues in the motor
Current signature analysis monitors the current waveform for abnormalities
Transformers work by transferring electrical energy between two or more circuits through electromagnetic induction.
Transformers consist of two coils of wire, known as the primary and secondary coils.
When an alternating current flows through the primary coil, it creates a changing magnetic field.
This changing magnetic field induces a voltage in the secondary coil, transferring electrical energy.
The ratio of the number o...
I applied via Naukri.com and was interviewed in Dec 2022. There were 6 interview rounds.
Pharmaceutical industry
Pharmaceutical industry
Pharmaceutical industry
Only work for this pharma industry
The industry can like this product that promotes the industry
I have didint can't have never answered this question
Baramati Agro interview questions for popular designations
I applied via Indeed and was interviewed in Mar 2023. There were 2 interview rounds.
Get interview-ready with Top Baramati Agro Interview Questions
QA and QC are closely related but distinct processes that work together to ensure product quality.
QA (Quality Assurance) is a process that focuses on preventing defects and ensuring that the product meets the required standards.
QC (Quality Control) is a process that focuses on identifying defects and correcting them before the product is released.
QA and QC work together to ensure that the product meets the required qua...
Normality is a measure of concentration used in chemistry to express the number of equivalents of a substance per liter of solution.
Normality is used to measure the concentration of acids and bases in a solution.
It is defined as the number of equivalents of a solute per liter of solution.
Normality is different from molarity, which measures the number of moles of solute per liter of solution.
For example, a 1N solution o...
Calibration is the process of adjusting and verifying the accuracy of measuring instruments or equipment.
Calibration ensures that the measurements taken by the instrument or equipment are accurate and reliable.
It involves comparing the readings of the instrument or equipment with a known standard or reference.
If there is a difference between the readings, adjustments are made to bring the instrument or equipment into a...
Distillation is a process of separating components of a mixture based on their boiling points.
It involves heating the mixture to vaporize the component with the lowest boiling point.
The vapor is then condensed and collected as a separate liquid.
This process is commonly used in the production of alcoholic beverages, petroleum refining, and water purification.
Distillation can also be used to purify chemicals and separate
Digestion is the process of breaking down food into smaller molecules that can be absorbed by the body.
Digestion starts in the mouth with the mechanical and chemical breakdown of food.
The food then travels through the esophagus to the stomach where it is further broken down by stomach acid and enzymes.
The small intestine is where most of the nutrients are absorbed into the bloodstream.
The remaining waste products are t...
Validation is the process of ensuring that a product or service meets the specified requirements and standards.
Validation is a quality assurance process that confirms that a product or service meets the intended requirements and specifications.
It involves testing and verifying that the product or service is fit for its intended use.
Validation is important in ensuring that products and services are safe, effective, and ...
Carbon allotropes are different forms of carbon with varying physical and chemical properties.
Carbon allotropes include diamond, graphite, fullerenes, carbon nanotubes, and amorphous carbon.
Diamond is the hardest naturally occurring substance and has a high thermal conductivity.
Graphite is a good conductor of electricity and is used in pencils and lubricants.
Fullerenes are spherical molecules made of carbon atoms and h...
Glucose to alcohol process is fermentation.
Fermentation is a metabolic process that converts sugar to alcohol.
It is carried out by yeast or bacteria in the absence of oxygen.
The process is used in the production of alcoholic beverages like beer, wine, and spirits.
It is also used in the production of biofuels like ethanol.
I applied via Walk-in and was interviewed in May 2023. There were 2 interview rounds.
Excel shortcut keys are key combinations that perform specific tasks in Excel to improve efficiency.
Shortcut keys can be used for various tasks such as copying, pasting, formatting, and navigating within a spreadsheet.
Examples of common Excel shortcut keys include Ctrl+C for copy, Ctrl+V for paste, Ctrl+B for bold, and Ctrl+Z for undo.
Shortcut keys can save time and make working in Excel more efficient.
Learning and usi...
To set up a new plant, establish security protocols, hire trained security staff, conduct regular training, and implement access control measures.
Establish security protocols and procedures for the new plant
Hire trained security staff with experience in industrial security
Conduct regular training sessions for security staff on emergency response, access control, and surveillance
Implement access control measures such as...
I applied via Naukri.com and was interviewed before Nov 2023. There was 1 interview round.
On market survey, and strategy, planning
Top trending discussions
Interview experience
based on 277 reviews
Rating in categories
Junior Officer
48
salaries
| ₹1 L/yr - ₹4.5 L/yr |
Assistant Manager
42
salaries
| ₹3.1 L/yr - ₹7.5 L/yr |
Sales Officer
29
salaries
| ₹2.2 L/yr - ₹4.8 L/yr |
Accounts Officer
25
salaries
| ₹2.5 L/yr - ₹4.2 L/yr |
Area Sales Manager
20
salaries
| ₹4.1 L/yr - ₹10 L/yr |
Godrej Agrovet
Rallis India
IFFCO
National Commodities Management Services