Upload Button Icon Add office photos

Autometers Alliance

Compare button icon Compare button icon Compare

Filter interviews by

Autometers Alliance Purchase/Vendor Development Manager Interview Questions and Answers

Updated 18 Jan 2021

Autometers Alliance Purchase/Vendor Development Manager Interview Experiences

1 interview found

Interview Questionnaire 

2 Questions

  • Q1. Development Process, Technical Process of Sheet metal, Casting Forging and machining. Focus on technical costing.
  • Q2. Focus on Costing, i.e. 1. RM Cost, 2. Process Cost, 3. Overheads and 4. BOP if this is any sub assembly or insert moulding.

Interview Preparation Tips

Interview preparation tips for other job seekers - Simple and positive.
focus on basic process and costing, plus check points of audits, basic questionnaire of audit ISO audit.

Interview questions from similar companies

I applied via Walk-in and was interviewed before Nov 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Why should you join this company

Interview Preparation Tips

Interview preparation tips for other job seekers - Nothing special u can show ur positive ways

I applied via Company Website and was interviewed before Jun 2019. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Can i join mahindra company ?

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was a technical one but was majorly a stress test. It lasted for about 1 hour 10 minutes. The interviewer wanted to test both my knowledge and communication skills. Most of the questions asked to me were related to my B.Tech curriculum i.e. mechanical engineering related topics. He stressed a lot on the basics related to my project topic. Luckily I was able to answer most of the questions correctly. I tried to answer each question with examples and also used props on the table (like pens, paperweights, pen stands etc.) to explain my theories. It was my first offcampus interview, and I think I did pretty well for a fresher. You need to stay calm and should apply presence of mind. Please go through the job description thoroughly word-by-word and recheck your resume to ensure that you are a best-fit for the position.

I applied via Naukri.com and was interviewed in Dec 2020. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. About Quality
  • Q2. What is the QMS
  • Ans. 

    QMS stands for Quality Management System. It is a set of policies, processes, and procedures required for planning and execution of quality control.

    • QMS ensures that products or services meet customer requirements and comply with regulations

    • It includes quality planning, quality control, quality assurance, and quality improvement

    • ISO 9001 is a widely recognized QMS standard

    • QMS is important for industries such as healthcar

  • Answered by AI
  • Q3. How to reduce a rejections and reworks
  • Ans. 

    To reduce rejections and reworks, implement a robust quality control system and focus on continuous improvement.

    • Implement a quality control system to catch defects early

    • Train employees on proper procedures and techniques

    • Conduct regular audits to identify areas for improvement

    • Analyze root causes of rejections and reworks to prevent future occurrences

    • Collaborate with suppliers to improve incoming materials quality

    • Utilize...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - About Quality control

I applied via Campus Placement and was interviewed before May 2021. There were 3 interview rounds.

Round 1 - Aptitude Test 

General aptitude

Round 2 - Technical 

(1 Question)

  • Q1. Basic programming questions, final year graduation project details, way of speaking
Round 3 - HR 

(1 Question)

  • Q1. Interest in joining company

Interview Preparation Tips

Topics to prepare for TCS Assistant Engineer interview:
  • Java
  • Python
  • SQL
Interview preparation tips for other job seekers - Prepare general aptitude and any basic programming like java Or python. Basic questions can be asked.

Interview Questionnaire 

12 Questions

  • Q1. What is an ideal diode?. Draw its input output characteristic curve
  • Ans. 

    An ideal diode is a theoretical diode that exhibits zero voltage drop when forward biased and infinite resistance when reverse biased.

    • An ideal diode acts as a perfect conductor when forward biased.

    • It allows current to flow in one direction with zero voltage drop.

    • When reverse biased, it acts as an open circuit with infinite resistance.

    • The input-output characteristic curve of an ideal diode is a vertical line at zero vol...

  • Answered by AI
  • Q2. Write a program for computing the factorial of a number using recursion
  • Ans. 

    Program to compute factorial of a number using recursion

    • Define a function that takes a number as input

    • Check if the number is 0 or 1, return 1 if true

    • Else, call the function recursively with n-1 as input and multiply with n

    • Return the result

    • Example: factorial(5) = 5 * factorial(4) = 5 * 4 * factorial(3) = 5 * 4 * 3 * factorial(2) = 5 * 4 * 3 * 2 * factorial(1) = 5 * 4 * 3 * 2 * 1 = 120

  • Answered by AI
  • Q3. List ten cellular operators in India
  • Ans. 

    There are several cellular operators in India. Here are ten of them.

    • Airtel

    • Vodafone Idea

    • Reliance Jio

    • BSNL

    • MTNL

    • Tata Docomo

    • Aircel

    • Uninor

    • Videocon

    • Loop Mobile

  • Answered by AI
  • Q4. Draw the layers of OSI model
  • Ans. 

    The OSI model has 7 layers that define how data is transmitted over a network.

    • Layer 1: Physical - deals with the physical connection of devices

    • Layer 2: Data Link - responsible for error-free transfer of data between devices

    • Layer 3: Network - handles routing of data between different networks

    • Layer 4: Transport - ensures reliable delivery of data between applications

    • Layer 5: Session - establishes and manages connections ...

  • Answered by AI
  • Q5. What is the function of session layer?
  • Ans. 

    Session layer manages and controls the connections between applications.

    • Establishes, maintains and terminates sessions between applications

    • Synchronizes data exchange between applications

    • Manages session checkpoints and recovery

    • Examples: Telnet, FTP, SMTP

  • Answered by AI
  • Q6. Tell us something about zener diode
  • Ans. 

    A zener diode is a type of diode that allows current to flow in the reverse direction when a certain voltage is reached.

    • Zener diodes are commonly used as voltage regulators.

    • They have a sharp breakdown voltage, which makes them useful for stabilizing voltage in electronic circuits.

    • Zener diodes are often used in power supplies, voltage references, and surge protectors.

    • They are also used in noise reduction circuits and as...

  • Answered by AI
  • Q7. Who is the chairman of ISRO?
  • Ans. 

    The chairman of ISRO is K. Sivan.

    • K. Sivan is an Indian space scientist and the current chairman of ISRO.

    • He has been associated with ISRO for over three decades and has contributed to several missions.

    • Under his leadership, ISRO has achieved several milestones including the successful launch of Chandrayaan-2.

  • Answered by AI
  • Q8. Write a program to print first 10 natural numbers on the screen
  • Ans. 

    Program to print first 10 natural numbers on the screen

    • Declare a variable i and initialize it to 1

    • Use a loop to print i and increment it until i reaches 10

  • Answered by AI
  • Q9. What is an IP address?
  • Ans. 

    An IP address is a unique numerical identifier assigned to every device connected to the internet.

    • IP stands for Internet Protocol

    • It consists of four sets of numbers separated by dots

    • Each set can range from 0 to 255

    • Example: 192.168.1.1 is an IP address

    • IPv4 and IPv6 are the two versions of IP addresses

  • Answered by AI
  • Q10. What is the full form of DRDO and NASA?
  • Ans. 

    DRDO stands for Defense Research and Development Organization and NASA stands for National Aeronautics and Space Administration.

    • DRDO is an agency of the Government of India, responsible for the development of technology for use by the military.

    • NASA is a United States government agency responsible for the civilian space program, as well as aeronautics and aerospace research.

    • DRDO was established in 1958 and has developed...

  • Answered by AI
  • Q11. Why do you want to join TCS?
  • Q12. How will you be able to adjust yourself in the environment of the company?

Interview Preparation Tips

Round: Test
Experience: Aptitude test was of a good level. It testing the basic concepts and was quants based with a few questions on reasoning which were comparatively easy. Good practice is required since the cut off in ky round was over 20 que out of a total of 30 questions.

Letter writing is an easy task. Just make sure that you use all the words given in the question statement.
Tips: Practice as much as you can!
Total Questions: 1 hour

Round: Technical Interview
Experience: This was quite long! Lasted for about 30 minutes! Questions were general and based on diodes, square wave rectifier. They as you about your favorite subject and the programming language you are comfortable with. It was not difficult. If one has a basic knowledge of your field then one can easy crack it.
Tips: Stay calm and confident

Round: HR Interview
Experience: This interview was of very short duration and was quite simple.
Tips: Stay calm and confident.

Skills: Basic Concepts, Confidence
College Name: Guru Nanak Dev University, Amritsar

Skills evaluated in this interview

I applied via Referral

Interview Preparation Tips

Round: Resume Shortlist
Experience: its just a bit of luck needed for this round. the main thing is that your Resume has been viewed by them and then only you are shortlisted. unless until they got an eye on your resume, you can't be selected. Sometimes its a hard luck that your resume is not selected but by fellow readers, don't loose your heart, try try until you fly.
Tips: your resume should be to the point and try to finish it in just 2 pages. Just show the juices in you, not the hard-work work behind them. Its not the right place. "Brag" as much as you can but but ..... I am stressing on But, brag about that only about which you know completely. always remember that, Judges behavior always depends on your resume. Their Questioning will be completely related to the stuff you have tried to mention in your Resume. So always mention those things only about whom you can give the details.

Skills: Knowledge, Verbal Ability, Passion, Basic Concepts
College Name: Ludhiana College of Engineering and Technology

Interview Questionnaire 

2 Questions

  • Q1. 1.Being a mechanical Engineer, prepare IC engine well. 2.Be thorough with terms like toe in toe out, castor etc.
  • Q2. I was being asked about my project at apollo tyres where i did my internship.

Interview Preparation Tips

Round: Resume Shortlist
Experience: I literally have no idea how my resume was shortlisted.

I applied via Recruitment Consultant and was interviewed in May 2019. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. What is your job responsibilities?
  • Q2. Tell me about your experience?

Interview Preparation Tips

Interview preparation tips for other job seekers - You will have to upload your updated resume and daily update your profile.

I applied via Referral and was interviewed in Mar 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. It provides 4 basic feature in cpp

Interview Preparation Tips

Interview preparation tips for other job seekers - Do your homework, practice

Autometers Alliance Interview FAQs

What are the top questions asked in Autometers Alliance Purchase/Vendor Development Manager interview?

Some of the top questions asked at the Autometers Alliance Purchase/Vendor Development Manager interview -

  1. Development Process, Technical Process of Sheet metal, Casting Forging and mach...read more
  2. Focus on Costing, i.e. 1. RM Cost, 2. Process Cost, 3. Overheads and 4. BOP if ...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.4k Interviews
Infosys Interview Questions
3.6
 • 7.6k Interviews
Wipro Interview Questions
3.7
 • 5.6k Interviews
Tech Mahindra Interview Questions
3.5
 • 3.8k Interviews
HCLTech Interview Questions
3.5
 • 3.8k Interviews
Tata Motors Interview Questions
4.2
 • 999 Interviews
Maruti Suzuki Interview Questions
4.2
 • 586 Interviews
Bosch Interview Questions
4.2
 • 331 Interviews
View all

Autometers Alliance Purchase/Vendor Development Manager Reviews and Ratings

based on 2 reviews

1.0/5

Rating in categories

1.0

Skill development

2.6

Work-life balance

1.0

Salary

2.6

Job security

1.8

Company culture

1.0

Promotions

1.0

Work satisfaction

Explore 2 Reviews and Ratings
Assistant Engineer
93 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
50 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
48 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
45 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
41 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Autometers Alliance with

Bharat Electronics

4.2
Compare

Bosch

4.2
Compare

TCS

3.7
Compare

Infosys

3.6
Compare
Did you find this page helpful?
Yes No
write
Share an Interview