Upload Button Icon Add office photos

Filter interviews by

Auto Cnc Machining Quality Inspector Interview Questions and Answers

Updated 16 Aug 2022

Auto Cnc Machining Quality Inspector Interview Experiences

1 interview found

I applied via AmbitionBox

Round 1 - Technical 

(1 Question)

  • Q1. What is Ra and Rz for?
  • Ans. 

    Ra and Rz are surface roughness parameters used to measure the roughness of a surface.

    • Ra is the arithmetic average of the deviations from the mean line of the surface profile.

    • Rz is the average of the five highest peak-to-valley heights within a sampling length.

    • Both parameters are commonly used in manufacturing and engineering to ensure the quality of machined surfaces.

    • Ra and Rz values can be measured using a profilomet...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Surface finish Measuring Tools, To give answer about above question.

Interview questions from similar companies

I applied via Placement agency and was interviewed in Dec 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Some questions from QMS. Some questions from inprocess machining inspection
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Jun 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Basic introduction about yourself and previous company
Round 3 - Technical 

(1 Question)

  • Q1. Technical questions from qa and last work in previous company
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(3 Questions)

  • Q1. Introduction of yourself
  • Q2. Daily work routine & Responsibility
  • Q3. Technical questions regarding Job profile

Interview Preparation Tips

Interview preparation tips for other job seekers - Currently they are not not taking employees on company payroll they offering one year contractual employment which is extendable if your performance are good or as per company requirements.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Average tooling questions
  • Q2. On past experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Not for long term

I applied via Approached by Company and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. General discussion about process in previous org
  • Q2. System integration knowledge

Interview Preparation Tips

Interview preparation tips for other job seekers - Do not enter to work with org since no any HR , Management, Health, safety policy for employee. There is a worst plant CEO with no system knowledge . No time limit . Behave like a animal
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Jul 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Drawing Reading
  • Q2. What is GD And T in drawing
  • Ans. 

    GD&T stands for Geometric Dimensioning and Tolerancing, a system for defining and communicating engineering tolerances on drawings.

    • GD&T is a symbolic language used on engineering drawings to specify the allowable variations in form, size, and orientation of features.

    • It uses symbols, such as squares, circles, and triangles, to define the tolerance zones for features on a part.

    • GD&T helps ensure that parts are manufacture...

  • Answered by AI

I applied via Other and was interviewed in Mar 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. HR: Can you join at Pune? Do you know AutoCad? Our interviewer is not available today (after fixing date and time, and after reaching Pune for an interview).
  • Ans. To HR: Yes, can join at Pune. I dont know autocad, its already clear in my CV, hope you saw it. Pl. advise, who will conduct in absense of the interviewer.
  • Answered by RAJ
  • Q2. Another Interviewer (quite junior to me): We will forward your CV to our management and will inform you (waiting since 6 months).

Interview Preparation Tips

Interview preparation tips for other job seekers - I don't know how such companies get ISO certifications, where HR manages from mails only, no formal email, improper guidance.
The interviewer was absent on the particular day, no written, verbal information about it. No guilt feelings. Another guy quite 15 years junior to me conducted the formal interview.
Neither HR nor any responsible authority goes thro any CV, without knowing details of the candidate prior to calling the candidate, and ask questions, which reflects quite pathetic culture of the organisation.
Example:
1. I am not Engineering graduate, still they call and tell, you are not from engineering discipline.
2. I don't know Autocad and not even mentioned in my CV, still they ask, do you know Autocad? What to do with such guys, to laugh at or cry?
3. No value of time, no respect for the candidate, I reached well in time at 11.30 a.m., all the way from Mumbai. I was kept waited till 3.30 p.m. Later I had to tell them, when will the interview be taken? Ohh, that time they realised, they have called a guy for interview, and simply say, our interviewer is absent today... again, to laugh or cry?
On a serious note, interviewers are company representatives, should value others and their time too, it should be well organised. Perfection does not come by getting ISO certification, it should be inherent in the company culture.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(4 Questions)

  • Q1. Process knowledge
  • Q2. List of process dealt with
  • Ans. 

    The processes I have dealt with include budget management, staff training, customer service, and project coordination.

    • Budget management

    • Staff training

    • Customer service

    • Project coordination

  • Answered by AI
  • Q3. Why you change ?
  • Ans. 

    I changed because I wanted to grow professionally and take on new challenges.

    • Seeking career advancement

    • Desire for personal growth

    • Opportunity for new challenges

    • Willingness to learn and adapt

    • Exploring different career paths

  • Answered by AI
  • Q4. Detailed counter questions on your answer

Interview Preparation Tips

Interview preparation tips for other job seekers - Here rules are very strict on leaves , you have to take 3 pl compulsory
1 hour extra working must
Time is 8:00 to 5;15

I applied via Company Website and was interviewed before Jan 2021. There was 1 interview round.

Interview Questionnaire 

5 Questions

  • Q1. What's you profile?
  • Q2. Are you ready to relocate
  • Q3. What's your expectations about salary
  • Q4. You are experienced ? Tell something about your last company role and responsibilities
  • Q5. Why we are hiring for you

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't tell direct answers.please answer in convincing method .like tell about your advantages. Only share positive answers avoid negative answers

Auto Cnc Machining Interview FAQs

How many rounds are there in Auto Cnc Machining Quality Inspector interview?
Auto Cnc Machining interview process usually has 1 rounds. The most common rounds in the Auto Cnc Machining interview process are Technical.

Tell us how to improve this page.

Interview Questions from Similar Companies

Concentric Interview Questions
3.8
 • 36 Interviews
Europa Locks Interview Questions
3.6
 • 20 Interviews
PMT Machines Interview Questions
3.3
 • 19 Interviews
Trelleborg Interview Questions
3.9
 • 18 Interviews
MITA Interview Questions
3.7
 • 14 Interviews
View all
Process Engineer
21 salaries
unlock blur

₹2.3 L/yr - ₹5.8 L/yr

CNC Operator
13 salaries
unlock blur

₹1.3 L/yr - ₹3.2 L/yr

QA Engineer
8 salaries
unlock blur

₹1.8 L/yr - ₹5.5 L/yr

CNC Programmer
7 salaries
unlock blur

₹2.2 L/yr - ₹4.2 L/yr

Supervisor
7 salaries
unlock blur

₹2 L/yr - ₹3.3 L/yr

Explore more salaries
Compare Auto Cnc Machining with

Europa Locks

3.6
Compare

Trelleborg

3.9
Compare

Case New-Holland Construction Equipment India

4.0
Compare

Tokai Rubber Auto Parts India

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview