Upload Button Icon Add office photos

Army Ordnance Corps

Compare button icon Compare button icon Compare

Filter interviews by

Army Ordnance Corps Subedar Clerk Interview Questions and Answers

Updated 9 Dec 2024

Army Ordnance Corps Subedar Clerk Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Nov 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. What is your introduction
  • Q2. What can you do this company'
  • Q3. What is your skills
  • Q4. What's Your family details
  • Q5. What's Your previous experiences

Interview Preparation Tips

Interview preparation tips for other job seekers - Job seekers for ex Army

Interview questions from similar companies

Interview Questionnaire 

12 Questions

  • Q1. What is fuselage station
  • Ans. 

    Fuselage station refers to a specific location on an aircraft's fuselage.

    • Fuselage station is a measurement of distance along the fuselage, typically measured in inches or millimeters.

    • It is used as a reference point for various components and systems on the aircraft.

    • For example, an aircraft's doors, windows, wings, and tail are all located at specific fuselage stations.

    • Fuselage station 0 is usually defined as the refere...

  • Answered by AI
  • Q2. What is butt line
  • Ans. 

    Butt line is not a commonly used term. It could refer to the line where the buttocks meet the thighs.

    • Butt line is not a medical term.

    • It could refer to the line where the buttocks meet the thighs.

    • It is not a commonly used term and may have different interpretations depending on the context.

  • Answered by AI
  • Q3. What is water line
  • Ans. 

    Water line refers to the pipe or tubing that carries water from the main supply to a building or property.

    • Water line is an essential component of a plumbing system.

    • It can be made of various materials such as copper, PVC, or galvanized steel.

    • The size of the water line depends on the water demand of the building or property.

    • Water lines can be underground or above ground.

    • A water line break or leak can cause significant da

  • Answered by AI
  • Q4. Cutting tools
  • Q5. Drill bit sizes
  • Q6. In drawing what is fast angel What is thired ange projection
  • Ans. 

    The question is unclear and seems to contain errors.

    • The question may be referring to 'fast angle' and 'third angle projection' in technical drawing.

    • Fast angle refers to a type of projection where the object is viewed from an angle that is not perpendicular to any of its faces.

    • Third angle projection is a method of drawing 3D objects in which the object is placed in a box with three sides and projected onto a plane.

    • Witho...

  • Answered by AI
  • Q7. What is the meaning of rivet how will it work
  • Ans. 

    A rivet is a metal fastener used to join two or more pieces of material together permanently.

    • Rivets are commonly used in construction, automotive, and aerospace industries.

    • They are inserted into pre-drilled holes and then deformed to hold the materials together.

    • Rivets can be made of various materials including aluminum, steel, and copper.

    • They are often used in place of screws or bolts when a permanent joint is required...

  • Answered by AI
  • Q8. General drill bit angel
  • Q9. How many cutting angels in reamer
  • Ans. 

    The number of cutting angles in a reamer varies depending on the type and size of the reamer.

    • The number of cutting angles can range from 2 to 6.

    • The cutting angles are designed to remove material from the workpiece as the reamer rotates.

    • The cutting angles can be straight or spiral, and can be symmetrical or asymmetrical.

    • The number and angle of the cutting edges can affect the surface finish and accuracy of the hole.

    • Exam...

  • Answered by AI
  • Q10. How many cutting angle in drill bit
  • Ans. 

    Drill bits can have various cutting angles depending on their purpose and material.

    • The most common cutting angle for general purpose drill bits is 118 degrees.

    • Drill bits for harder materials like metal may have a sharper angle of 135 degrees.

    • Masonry drill bits have a flatter angle of 90 degrees to prevent cracking of the material.

    • The cutting angle affects the efficiency and precision of the drilling process.

  • Answered by AI
  • Q11. Drill bit made by
  • Ans. 

    Drill bits are made by various manufacturers using different materials and designs.

    • Drill bits can be made from high-speed steel, cobalt, carbide, or diamond.

    • Manufacturers include DeWalt, Bosch, Milwaukee, and Irwin.

    • The design of the drill bit can vary depending on the intended use, such as twist bits, spade bits, or hole saws.

  • Answered by AI
  • Q12. How many cutting files
  • Ans. 

    The number of cutting files depends on the project requirements and design complexity.

    • The number of cutting files can range from a few to hundreds or even thousands.

    • It also depends on the type of cutting machine being used.

    • For example, a laser cutting machine may require different files than a CNC router.

    • The number of cutting files can also vary based on the material being cut and its thickness.

    • It is important to have ...

  • Answered by AI

I applied via Company Website and was interviewed in Jan 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Tell me about yourself.
  • Q2. What is your experience

Interview Preparation Tips

Topics to prepare for Indian Army Financial Analyst interview:
  • Accounting
Interview preparation tips for other job seekers - Good skills
Language
System work

Financial Analyst Interview Questions & Answers

MKU user image nandini acharya

posted on 10 Mar 2025

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I appeared for an interview before Mar 2024.

Round 1 - HR 

(1 Question)

  • Q1. Past experience as a financial analyst
  • Ans. 

    Experienced financial analyst with a strong background in data analysis, forecasting, and financial modeling.

    • Conducted financial forecasting and budgeting for a mid-sized company, improving accuracy by 20%.

    • Developed comprehensive financial models to evaluate investment opportunities, leading to a successful acquisition.

    • Analyzed financial statements and key performance indicators to provide actionable insights to senior...

  • Answered by AI
Round 2 - Case Study 

Dummy company financial analysis for decision making

Round 3 - One-on-one 

(1 Question)

  • Q1. About me and experience in past companies and what will i bring to the table

Interview Preparation Tips

Interview preparation tips for other job seekers - Be thorough in what you have worked on in the past

I applied via Referral and was interviewed before Sep 2021. There was 1 interview round.

Round 1 - Panel interview 

(2 Questions)

  • Q1. Tell me about a time when you had to compromise with another team to achieve mutual goals.
  • Q2. How do you deal with an unreasonable request?
  • Ans. 

    I would assess the request and communicate any limitations or alternatives.

    • Listen to the request and ask clarifying questions

    • Evaluate the feasibility of the request

    • Communicate any limitations or alternatives

    • Offer to find a compromise or alternative solution

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Situational based questions, telling about an example when you used a certain skill that is desired. Communication, conflict resolution, difficult problem solving, accountability.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Asked about Experience in the relevant field
  • Q2. Mechanical basics
Round 2 - One-on-one 

(2 Questions)

  • Q1. Technical difficulties related to manufacturing sector
  • Q2. Production knowledge
Round 3 - HR 

(2 Questions)

  • Q1. Salary expectations
  • Q2. Why you are going to relocate?
  • Ans. 

    I am relocating for a new job opportunity that aligns with my career goals and offers better growth prospects.

    • New job opportunity with better growth prospects

    • Alignment with career goals

    • Seeking new challenges and experiences

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Easy moderate 40 questions were there

Round 2 - Technical 

(2 Questions)

  • Q1. Explain your projects
  • Ans. 

    I have worked on various projects including a web development project, a data analysis project, and a machine learning project.

    • Developed a website using HTML, CSS, and JavaScript for a local business

    • Conducted data analysis on customer feedback data to identify trends and insights

    • Implemented a machine learning model to predict customer churn for a telecom company

  • Answered by AI
  • Q2. What is your management style
  • Ans. 

    My management style is collaborative and empowering, focusing on communication and teamwork.

    • I believe in open communication and transparency within the team.

    • I empower team members to take ownership of their work and make decisions.

    • I value teamwork and collaboration, encouraging input from all team members.

    • I provide support and guidance to help team members grow and develop their skills.

    • I believe in setting clear goals

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Believe in yourself
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Application Form 

(2 Questions)

  • Q1. Cgpa secured till sem
  • Q2. Any previous internships
  • Ans. 

    Yes, I have completed internships at two different companies.

    • Interned at ABC Company in marketing department

    • Interned at XYZ Company in finance department

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. How do you align to our proect
  • Ans. 

    I align with your project by understanding the goals, values, and expectations of the organization and ensuring my work contributes to its success.

    • Researching and familiarizing myself with the project goals and objectives

    • Communicating effectively with team members to ensure alignment

    • Adapting my skills and expertise to meet the project requirements

    • Seeking feedback and making adjustments as needed

    • Prioritizing tasks based

  • Answered by AI
  • Q2. Explain your previous experience
  • Ans. 

    I have 2 years of experience in marketing and social media management for a tech startup.

    • Managed social media accounts and created engaging content

    • Developed and implemented marketing strategies to increase brand awareness

    • Analyzed data to track the success of campaigns

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Oct 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Assignment 

I'm doing project what I'm learn from there

Round 3 - Technical 

(2 Questions)

  • Q1. About my project
  • Q2. About my project topics

Army Ordnance Corps Interview FAQs

How many rounds are there in Army Ordnance Corps Subedar Clerk interview?
Army Ordnance Corps interview process usually has 1 rounds. The most common rounds in the Army Ordnance Corps interview process are Technical.
What are the top questions asked in Army Ordnance Corps Subedar Clerk interview?

Some of the top questions asked at the Army Ordnance Corps Subedar Clerk interview -

  1. What's Your previous experien...read more
  2. What can you do this compa...read more
  3. What is your introduct...read more

Tell us how to improve this page.

Army Ordnance Corps Subedar Clerk Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Indian Army Interview Questions
4.7
 • 149 Interviews
BHEL Interview Questions
4.1
 • 113 Interviews
BARC Interview Questions
4.4
 • 32 Interviews
BEML Interview Questions
4.0
 • 22 Interviews
Mazagon Dock Interview Questions
4.4
 • 18 Interviews
View all
Army Ordnance Corps Subedar Clerk Salary
based on 8 salaries
₹0.8 L/yr - ₹6 L/yr
39% less than the average Subedar Clerk Salary in India
View more details

Army Ordnance Corps Subedar Clerk Reviews and Ratings

based on 5 reviews

5.0/5

Rating in categories

4.9

Skill development

4.9

Work-life balance

4.9

Salary

4.9

Job security

5.0

Company culture

4.9

Promotions

4.9

Work satisfaction

Explore 5 Reviews and Ratings
Army Junior Commission Officer
30 salaries
unlock blur

₹4.8 L/yr - ₹12 L/yr

Army Officer
28 salaries
unlock blur

₹3.9 L/yr - ₹13.9 L/yr

Executive Army
20 salaries
unlock blur

₹2 L/yr - ₹8.2 L/yr

Army
15 salaries
unlock blur

₹1 L/yr - ₹8 L/yr

Defence
12 salaries
unlock blur

₹4.5 L/yr - ₹7.2 L/yr

Explore more salaries
Compare Army Ordnance Corps with

Indian Army

4.7
Compare

Defence Research & Development Organisation

4.5
Compare

Indian Space Research Organisation

4.5
Compare

Aeronautical Development Agency

4.4
Compare
Did you find this page helpful?
Yes No
write
Share an Interview