i
Filter interviews by
I applied via Walk-in and was interviewed before Sep 2023. There were 2 interview rounds.
I have worked on various instruments including multimeters, oscilloscopes, power analyzers, and calibration equipment.
Multimeters
Oscilloscopes
Power analyzers
Calibration equipment
I am looking for a competitive salary that reflects my experience and skills in the electrical field.
Research average salaries for Electrical Supervisors in the industry
Consider your level of experience and qualifications
Factor in the location and size of the company
Be prepared to negotiate based on benefits and opportunities for growth
Top trending discussions
posted on 6 Jan 2024
I applied via Approached by Company and was interviewed in Jul 2023. There were 4 interview rounds.
30min test from core subject
Usual GD on a relevant topic, everyone gets the opportunity to talk. Make relevant points and stick on to your opinion.
posted on 17 May 2024
Miniature Circuit Breaker (MCB) is a type of circuit breaker that automatically switches off electrical circuits during abnormal conditions.
Types of MCB include single pole MCB, double pole MCB, triple pole MCB, and four pole MCB
MCBs can also be classified based on their breaking capacity, such as B, C, D, and K types
Some examples of MCB manufacturers are Schneider Electric, Siemens, ABB, and Legrand
posted on 18 Jan 2025
I applied via Company Website and was interviewed in Dec 2024. There were 2 interview rounds.
VFD stands for Variable Frequency Drive, used to control the speed of an AC motor by varying the frequency and voltage supplied to the motor.
VFDs are commonly used in industrial applications to control pumps, fans, and other motor-driven equipment.
They can improve energy efficiency by adjusting motor speed to match the required load.
VFDs can also provide better control over motor acceleration and deceleration, reducing...
OLRs provide access to educational materials and resources online for self-paced learning.
Provide access to a wide range of educational materials and resources
Allow for self-paced learning and flexibility in studying
Can include videos, interactive quizzes, readings, and other multimedia content
Enable learners to access information anytime, anywhere with an internet connection
Can be used for professional development or
RCCB stands for Residual Current Circuit Breaker, a device designed to quickly disconnect power in the event of a leakage current.
RCCB is a safety device used to protect against electric shock and fire hazards.
It detects any imbalance in the electrical current flowing through the circuit.
When a leakage current is detected, the RCCB trips and disconnects the power supply.
RCCBs are commonly used in residential, commercia...
Star delta connection is commonly used in high-power industrial applications to reduce starting current.
High-power industrial applications
Motors with high starting current
Applications where smooth starting is required
posted on 5 Apr 2025
I appeared for an interview in Oct 2024, where I was asked the following questions.
As an Electrical Design Engineer, I focus on creating and optimizing electrical systems and components for various applications.
Design electrical circuits and systems, such as power distribution networks.
Use software tools like AutoCAD and MATLAB for simulations and designs.
Collaborate with cross-functional teams to ensure design feasibility.
Conduct testing and troubleshooting of electrical systems to ensure compliance...
I possess extensive knowledge in electrical design, including circuit analysis, power systems, and compliance with industry standards.
Proficient in circuit design using software like AutoCAD and MATLAB.
Experience in power distribution systems, ensuring efficiency and reliability.
Knowledge of industry standards such as IEC, IEEE, and NEC for compliance.
Skilled in troubleshooting and optimizing electrical systems for per...
posted on 13 Jan 2025
I applied via Campus Placement and was interviewed in Jul 2024. There were 2 interview rounds.
The first round was a gamified aptitude test, and shortlisting was conducted based on sectional cutoffs. Female candidates were given higher preference.
Circuit breakers are devices that automatically stop the flow of electricity when a fault is detected, while relays are switches that open or close circuits based on electrical signals.
Circuit breakers are designed to protect electrical circuits from damage caused by overcurrent or short circuits.
They work by detecting abnormal current flow and quickly interrupting the circuit to prevent damage.
Relays are electromechan...
A Buchholz relay is a protective device used in oil-filled transformers to detect and prevent internal faults.
Detects faults such as insulation breakdown or arcing within the transformer
Consists of a float switch connected to an alarm or trip circuit
When gas or oil accumulates due to a fault, the float rises and triggers the alarm or trip signal
Helps prevent major damage to the transformer by isolating it from the powe
Induction motor operates on the principle of electromagnetic induction. Mutual inductance is the measure of the coupling between two coils.
Induction motor works on the principle of electromagnetic induction where a rotating magnetic field is produced to induce current in the rotor, causing it to rotate.
Mutual inductance is the measure of the coupling between two coils, indicating how much of the magnetic field produced...
posted on 14 Aug 2024
I applied via Campus Placement and was interviewed in Jul 2024. There were 3 interview rounds.
About power system control system
Present trends and tgey willgive 10 min to think and note down
posted on 14 May 2024
I applied via Campus Placement and was interviewed in Apr 2024. There was 1 interview round.
Fermentation is a metabolic process that produces chemical changes in organic substrates through the action of enzymes.
Fermentation is a metabolic process that converts carbohydrates, such as sugars and starches, into alcohol or organic acids using microorganisms like yeast or bacteria.
Common examples of fermentation include the production of beer, wine, yogurt, and bread.
Fermentation is used in various industries such...
posted on 2 Jun 2024
Circuit breakers are electrical switches designed to protect electrical circuits from damage caused by overload or short circuit.
Circuit breakers automatically trip when they detect an overload or short circuit in the electrical system.
They interrupt the flow of electricity to prevent damage to the circuit or electrical devices.
Circuit breakers can be reset manually after tripping to restore power to the circuit.
There ...
posted on 26 Aug 2023
I applied via Recruitment Consulltant and was interviewed in Jul 2023. There were 2 interview rounds.
Automatic Transfer Switches are devices used to automatically switch power sources in case of a power outage.
Types of automatic transfer switches include open transition, closed transition, and delayed transition.
Examples of automatic transfer switch manufacturers include Generac, Eaton, and Schneider Electric.
Automatic transfer switches are commonly used in backup power systems for critical facilities like hospitals,
based on 1 interview
Interview experience
based on 2 reviews
Rating in categories
Design Engineer
50
salaries
| ₹3 L/yr - ₹9.8 L/yr |
Project Engineer
34
salaries
| ₹2 L/yr - ₹6 L/yr |
Purchase Engineer
24
salaries
| ₹2.6 L/yr - ₹4.8 L/yr |
Automation Engineer
23
salaries
| ₹2.5 L/yr - ₹4.9 L/yr |
Assistant Manager
21
salaries
| ₹4.5 L/yr - ₹9.7 L/yr |
Schneider Electric
Rockwell Automation
GKN
Titan Engineering & Automation