Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by ArcelorMittal Nippon Steel Team. If you also belong to the team, you can get access from here

ArcelorMittal Nippon Steel Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

ArcelorMittal Nippon Steel Machine Maintenance Engineer Interview Questions and Answers

Updated 23 Apr 2024

ArcelorMittal Nippon Steel Machine Maintenance Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Mar 2024. There were 2 interview rounds.

Round 1 - Group Discussion 

Barring checking and replacement work

Round 2 - HR 

(1 Question)

  • Q1. Gear box replacement work and safety first and all ppes sure and paper work and walked away clean and fresh and try out and sure

Interview Preparation Tips

Interview preparation tips for other job seekers - Because of the opportunity for growth and advancement

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. What is Hydraulic system and it's components?
  • Ans. 

    A hydraulic system uses fluid to transmit power and consists of components like pumps, cylinders, valves, and hoses.

    • Hydraulic pump: generates flow to the hydraulic system

    • Hydraulic cylinder: converts fluid power into mechanical power

    • Hydraulic valve: controls the flow and pressure of the fluid

    • Hydraulic hose: carries the fluid between components

  • Answered by AI
  • Q2. Explain steel making process?
  • Ans. 

    Steel making process involves converting iron ore into steel through various stages like smelting, refining, and casting.

    • Iron ore is mined and transported to a steel mill.

    • The iron ore is smelted in a blast furnace to remove impurities and create molten iron.

    • The molten iron is then refined in a basic oxygen furnace or an electric arc furnace to adjust the carbon content and other alloying elements.

    • The refined molten iro...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Everything was good interview was quite impressive and perfect.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Jan 2023. There was 1 interview round.

Round 1 - HR 

(4 Questions)

  • Q1. Why do you wanna join here.
  • Q2. How does engine work
  • Ans. 

    An engine works by converting fuel into mechanical energy through a series of combustion and mechanical processes.

    • Engines typically have cylinders where fuel is ignited and combustion occurs.

    • The combustion process creates high-pressure gases that push pistons, which in turn rotate the crankshaft.

    • The crankshaft converts the linear motion of the pistons into rotational motion.

    • This rotational motion is then transferred to...

  • Answered by AI
  • Q3. Function of flywheel
  • Ans. 

    A flywheel is a mechanical device used to store rotational energy and provide stability to a system.

    • Stores kinetic energy and releases it when needed

    • Maintains rotational momentum

    • Provides stability and smooth operation

    • Used in various applications like engines, power plants, and energy storage systems

  • Answered by AI
  • Q4. Steel types and explain all
  • Ans. 

    Steel types are classified based on their composition and properties.

    • Carbon Steel: Contains primarily carbon and iron. Examples include low carbon steel, medium carbon steel, and high carbon steel.

    • Alloy Steel: Contains additional elements such as manganese, nickel, chromium, or molybdenum to enhance properties. Examples include stainless steel, tool steel, and high-strength low-alloy steel.

    • Stainless Steel: Contains a m...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just do your best.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
-

I applied via Company Website and was interviewed in Apr 2024. There were 2 interview rounds.

Round 1 - Group Discussion 

Gear box replacement work

Round 2 - HR 

(6 Questions)

  • Q1. Barring checking and replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and blumber block top cover open and old slue Barring remove and new slue...
  • Ans. 

    Blumber block top cover open and old slue Barring remove and new slue Barring replace and nut tightening sure and blumber block top cover fixed and bolts nut tightening sure and paper work cancelled and conveyer belt running ok

  • Answered by arbindkumarsingh
  • Q2. Motor replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old motor remove and new motor replace and bolts nut tightening s...
  • Ans. 

    Bolt nut open and old motor remove and new motor replace and bolt nut tightening sure and Dayal gauge eliminate process ok and paper work cancelled and conveyer belt running ok

  • Answered by arbindkumarsingh
  • Q3. V-scraper replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old v-scraper remove new v-scraper replace and bolts nut tigh...
  • Q4. Discharge Chute replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old discharge chute remove and new discharge chute repl...
  • Ans. 

    Bolt nut open and old discharge chute remove and new discharge chute replace and bolts nut tightening sure and paper work cancelled and conveyer belt running ok

  • Answered by arbindkumarsingh
  • Q5. Barring Greasing work and safety first and all ppes sure and paper work and all pulley checking and savings greasing sure and paper work cancelled
  • Q6. Gear box replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old gear box remove and new gear box replace and bolts nut tig...

Interview Preparation Tips

Interview preparation tips for other job seekers - Because of the opportunity for growth and advancement

I applied via Naukri.com and was interviewed in Apr 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Most of the question asked from my expriece field related, also asked about achievements my contribution

Interview Preparation Tips

Interview preparation tips for other job seekers - Always tell facts never lie tell what changes that you take when you were there

I was interviewed in Jul 2017.

Interview Preparation Tips

Round: Resume Shortlist
Experience: Ash handling system in thermal power plant operation & maintenance
Tips: Vaccum system

Skills: Engineering Basics

I was interviewed in Sep 2017.

Interview Preparation Tips

Round: Resume Shortlist
Experience: Mechanical engineer
Tips: Strong knowledge of mechanical maintenance

Round: Group Discussion
Duration: 1 hour

Skills: Mechanical Engineering Basics

I was interviewed in Jun 2017.

Interview Questionnaire 

8 Questions

  • Q1. Percentage of carbon presence in cast iron
  • Ans. 

    The percentage of carbon presence in cast iron varies from 2.1% to 6.67% depending on the type of cast iron.

    • Cast iron is classified into four types based on its carbon content: white, gray, ductile, and malleable.

    • White cast iron has the highest carbon content, ranging from 2.1% to 6.67%.

    • Gray cast iron has a lower carbon content, ranging from 2.5% to 4%.

    • Ductile cast iron has a carbon content of 3.2% to 4.1%.

    • Malleable ca...

  • Answered by AI
  • Q2. What did u mean by addendum in gears
  • Ans. 

    Addendum is the height of the tooth above the pitch circle in a gear.

    • Addendum is the distance between the pitch circle and the top of the gear tooth.

    • It is an important parameter in gear design as it affects the strength and durability of the gear.

    • The addendum can be calculated using the formula addendum = module or diametral pitch.

    • For example, in a gear with a module of 2mm, the addendum would be 2mm.

    • Addendum is the op...

  • Answered by AI
  • Q3. Least count of varnier calipers
  • Ans. 

    The least count of vernier calipers is the smallest measurement that can be accurately read on the scale.

    • The least count is determined by the number of divisions on the main scale and the vernier scale.

    • It is calculated by dividing the smallest division on the main scale by the number of divisions on the vernier scale.

    • For example, if the smallest division on the main scale is 0.1 mm and the vernier scale has 10 division

  • Answered by AI
  • Q4. Tell me something about ur company where u are working ?
  • Ans. 

    I work for a leading engineering firm specializing in designing and manufacturing industrial machinery.

    • We have a team of experienced mechanical engineers who work on various projects

    • Our company focuses on innovation and cutting-edge technology in our designs

    • We have successfully completed projects for clients in the automotive and aerospace industries

  • Answered by AI
  • Q5. Tell me your family background ?
  • Ans. 

    I come from a close-knit family with a strong emphasis on education and hard work.

    • My parents are both engineers, so I grew up with a passion for problem-solving and innovation.

    • I have two siblings, one of whom is also pursuing a career in engineering.

    • Family gatherings often involve discussions about new technologies and projects we are working on.

    • My family has always been supportive of my academic and career pursuits.

  • Answered by AI
  • Q6. Tell me something about yourself ?
  • Ans. 

    I am a passionate mechanical engineer with a strong background in designing and implementing innovative solutions.

    • Graduated with a degree in Mechanical Engineering from XYZ University

    • Completed internships at ABC Company and gained hands-on experience in CAD software

    • Led a team project to design and build a prototype for a new cooling system

    • Continuously learning and staying updated on the latest industry trends and techn

  • Answered by AI
  • Q7. Why are u join this company ?
  • Ans. 

    I am joining this company because of its reputation for innovation and commitment to employee growth.

    • Opportunity to work on cutting-edge projects

    • Strong focus on professional development

    • Positive company culture and values

    • Potential for career advancement

    • Desire to contribute to a successful team

  • Answered by AI
  • Q8. Why I hire u?
  • Ans. 

    I have a strong background in mechanical engineering with hands-on experience in designing and implementing innovative solutions.

    • Extensive knowledge in mechanical engineering principles and practices

    • Proven track record of successfully completing projects on time and within budget

    • Strong problem-solving skills and ability to think creatively

    • Experience in using CAD software for design and analysis

    • Excellent communication a...

  • Answered by AI

Interview Preparation Tips

Round: Technical Interview
Experience: I hv cleared

Round: HR Interview
Experience: I was narvous and rejected.

Skills: Way Of Answering

I applied via Campus Placement and was interviewed before May 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

Most of the questions were from technical section.

Round 2 - HR 

(1 Question)

  • Q1. #About my family #Place from which I belongs to #About job experience. # Tecnical question . #Safety .

Interview Preparation Tips

Interview preparation tips for other job seekers - Only book knowledge is not enough for getting the job in any company.
You have to developed your extra skills which can help you on the working field .

I applied via Company Website and was interviewed before Jun 2020. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Qualification only
  • Q2. Maintenance related
  • Q3. Bearing and gear information

Interview Preparation Tips

Interview preparation tips for other job seekers - Machinecal maintenance engineering sms 2 & mines area Experience
Contribute & help others!
anonymous
You can choose to be anonymous

ArcelorMittal Nippon Steel Interview FAQs

How many rounds are there in ArcelorMittal Nippon Steel Machine Maintenance Engineer interview?
ArcelorMittal Nippon Steel interview process usually has 2 rounds. The most common rounds in the ArcelorMittal Nippon Steel interview process are HR and Group Discussion.

Recently Viewed

SALARIES

ArcelorMittal Nippon Steel

JOBS

Anand Rathi: Online Stock Trading & Advisory

No Jobs

INTERVIEWS

ArcelorMittal Nippon Steel

No Interviews

INTERVIEWS

Bonfiglioli Transmissions Private Limited

No Interviews

INTERVIEWS

QS Quacquarelli Symonds

No Interviews

SALARIES

ArcelorMittal Nippon Steel

SALARIES

ArcelorMittal Nippon Steel

SALARIES

Alstom Transportation

INTERVIEWS

ArcelorMittal Nippon Steel

No Interviews

SALARIES

QS Quacquarelli Symonds

Tell us how to improve this page.

ArcelorMittal Nippon Steel Machine Maintenance Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 857 Interviews
JSW Steel Interview Questions
3.9
 • 592 Interviews
Jindal Stainless Interview Questions
4.2
 • 206 Interviews
JSW Group Interview Questions
3.9
 • 109 Interviews
Jindal Saw Interview Questions
4.0
 • 99 Interviews
Viraj Profiles Interview Questions
3.8
 • 76 Interviews
Vedanta Limited Interview Questions
3.8
 • 46 Interviews
View all
Deputy Manager
721 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
584 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
519 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Field Engineer
373 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
350 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare ArcelorMittal Nippon Steel with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Vedanta Limited

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent