Filter interviews by
I was interviewed before Jul 2016.
There are various types of cable trays and trunking used in electrical installations.
Ladder cable tray
Solid bottom cable tray
Wire mesh cable tray
Trough cable tray
Perforated cable tray
PVC trunking
Metal trunking
Yes, I know how to detect faults in motors.
Perform visual inspection for any signs of damage or wear
Check for abnormal noises or vibrations during operation
Measure the motor's electrical parameters such as voltage, current, and resistance
Use specialized tools like a megohmmeter to test insulation resistance
Perform a motor winding test to check for short circuits or open circuits
Analyze motor performance data to identif
I applied via Company Website and was interviewed in Oct 2024. There was 1 interview round.
A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.
Transformers are used to increase or decrease voltage levels in electrical circuits.
They consist of two coils of wire, known as the primary and secondary coils.
The primary coil is connected to the input voltage source, while the secondary coil is connected to the output load.
Transformers...
UPS stands for Uninterruptible Power Supply, a device that provides emergency power to a load when the input power source fails.
UPS ensures continuous power supply during power outages or fluctuations
It typically consists of a battery, inverter, and charger
Commonly used in data centers, hospitals, and critical infrastructure
Examples include APC, CyberPower, and Eaton UPS systems
MCB stands for Miniature Circuit Breaker, a device designed to protect electrical circuits from overloads and short circuits.
MCB is a type of circuit breaker that automatically switches off electrical circuits during abnormal conditions like overload or short circuit.
It is commonly used in residential and commercial electrical installations to protect electrical equipment and prevent electrical fires.
MCBs are available...
Current is the flow of electric charge, measured in Amperes, while voltage is the force that drives the current, measured in Volts.
Current is the rate of flow of electric charge in a circuit.
Voltage is the electrical potential difference that drives the current.
Current is measured in Amperes (A) while Voltage is measured in Volts (V).
Ohm's Law relates current, voltage, and resistance: V = I * R.
CT and PT are electrical devices used in power systems to measure current and voltage respectively.
CT stands for Current Transformer and is used to measure high currents by stepping down the current to a lower value.
PT stands for Potential Transformer and is used to measure high voltages by stepping down the voltage to a lower value.
CTs and PTs are commonly used in power distribution systems to provide accurate measure
The last rating MCB can go up to 125 amps.
The last rating MCB can typically go up to 125 amps.
MCBs are available in various ratings such as 6A, 10A, 16A, 32A, 63A, and 125A.
The rating of an MCB determines the maximum current it can safely handle before tripping.
For higher current requirements, larger MCBs or other protective devices like MCCBs may be used.
I applied via Walk-in and was interviewed in May 2024. There were 2 interview rounds.
The first thing to do in case of a hazard is to ensure the safety of yourself and others.
Assess the situation to determine the nature and extent of the hazard.
Alert others in the vicinity about the hazard.
Follow safety protocols and procedures to mitigate the hazard.
Contact emergency services if necessary.
Evacuate the area if instructed to do so.
Check for clogs in the fuel line, inspect the injector for damage, clean or replace the injector if necessary.
Inspect the fuel line for any clogs or blockages
Check the injector for any damage or malfunction
Clean the injector using appropriate tools and techniques
If cleaning doesn't work, consider replacing the injector
Ensure proper fuel flow and pressure to the injector
Earth leakage can be detected using a residual current device (RCD) or ground fault circuit interrupter (GFCI).
Earth leakage can be detected by measuring the difference in current between the live and neutral wires in a circuit.
A residual current device (RCD) or ground fault circuit interrupter (GFCI) can be used to detect earth leakage and quickly disconnect the power supply to prevent electric shock.
Regular testing o...
Kool to the core of up to the mark
I applied via AmbitionBox and was interviewed in Dec 2023. There was 1 interview round.
Software is a collection of programs, data, and instructions that enable a computer to perform tasks.
Software is the intangible part of a computer system.
It includes operating systems, applications, and utilities.
Examples of software include Microsoft Windows, Adobe Photoshop, and Google Chrome.
Easy questions, not much to say
I applied via Walk-in and was interviewed in Aug 2023. There were 3 interview rounds.
Yes I am iti fitter and electrical work experience 10 years
Power cut no working stop on invator working start
No mcb work on short sircut so short sir cut working Power on
I applied via campus placement at National Institute of Technology (NIT), Raipur
It was good and hectic
Focus on dsa and puzzles
Electrical Engineer
5
salaries
| ₹6 L/yr - ₹18 L/yr |
Electrical Draughtsman
4
salaries
| ₹0.8 L/yr - ₹15 L/yr |
MEP Engineer
3
salaries
| ₹11.2 L/yr - ₹24 L/yr |
Site Manager
3
salaries
| ₹15 L/yr - ₹36 L/yr |
TCS
Accenture
Wipro
Cognizant