Upload Button Icon Add office photos

Arabian Industries

Compare button icon Compare button icon Compare

Filter interviews by

Arabian Industries Rigging Supervisor Interview Questions and Answers

Updated 6 Sep 2021

Arabian Industries Rigging Supervisor Interview Experiences

1 interview found

Interview Questionnaire 

3 Questions

  • Q1. Lifting any equipment or material what are you doing first
  • Q2. What is critical lifting
  • Ans. 

    Critical lifting refers to the process of lifting heavy or delicate loads that require careful planning and execution to ensure safety and prevent damage.

    • Critical lifting involves lifting loads that are heavy or delicate and require special attention.

    • It requires careful planning and coordination to ensure the safety of personnel and equipment.

    • Factors such as load weight, center of gravity, lifting equipment, and enviro...

  • Answered by AI
  • Q3. Who is responsible for a lifting plan
  • Ans. 

    The lifting plan is typically the responsibility of the rigging engineer or supervisor.

    • The rigging engineer or supervisor is responsible for creating and implementing a lifting plan.

    • They assess the load, determine the appropriate rigging equipment and techniques, and ensure compliance with safety regulations.

    • The lifting plan may also involve coordination with other departments or personnel, such as crane operators or p...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - 1.Be punctual at your interview. It is mandatory to be on time at a job interview....
2.do you research on the company...
3.don't forget about nonverbal communication....
4.Be polite with everyone....
5.Be prepared for your interview

Interview questions from similar companies

I applied via Walk-in and was interviewed in Jan 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. What are your strengths and weaknesses?

Interview Preparation Tips

Interview preparation tips for other job seekers - Confident speak and good communication
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Not Selected
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Interview is very long process ' 2-3 round technical then HR round. But Hr team is coperative Very long process for joining & confirmation.
  • Q2. Basically Concrete technology for civil Engineer interview
  • Q3. Related to Concrete Grade & strength
Round 3 - Technical 

(1 Question)

  • Q1. Concrete technology details as per codes

Interview Preparation Tips

Interview preparation tips for other job seekers - Joining & interview is long process. But Hr team is cooperative
They ask technical question
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
-

I applied via Referral and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Experience about my past work as a Quantity Surveyor
  • Q2. How will i handle subcontractor that's is applying for Contract
  • Ans. 

    I will evaluate the subcontractor's qualifications, experience, and track record before considering them for the contract.

    • Review the subcontractor's past work and references

    • Assess the subcontractor's financial stability and capacity to complete the work

    • Negotiate terms and conditions of the contract to ensure clarity and alignment of expectations

    • Monitor the subcontractor's performance throughout the project to ensure qu...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Just relax and calm to answer the interview questions, everything will be fine.

I applied via Referral and was interviewed before Jan 2020. There were 7 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Questions from Electrical and instrumentation and Verbal Arithmetic Mathematics and English
  • Q2. Questions are always changes for every year
  • Q3. Questions are always changes for yearly
  • Q4. Same as above

Interview Preparation Tips

Interview preparation tips for other job seekers - My only advice for anyone going for interview is that , you must know the line of your works and the area that you are associate with because question can come out from there .Like me i did electrical practical test/Objectives despite that am working as material controller because if electrical/instrument and mechanical materials arrived how will i be able to identify them .Please also be bold enough to answer question

I appeared for an interview in Sep 2016.

Interview Questionnaire 

2 Questions

  • Q1. Tell us about yourself
  • Ans. 

    I am a recent graduate with a degree in Computer Science and a passion for coding and problem-solving.

    • Graduated with a degree in Computer Science

    • Passionate about coding and problem-solving

    • Completed internships at tech companies

    • Participated in coding competitions

  • Answered by AI
  • Q2. Technical questions on heat exchangers.

Interview Preparation Tips

Round: Test
Experience: Online Aptitude test. I attempted the verbal section firstly, since I was more confident on that part. After I was done with it, I opted for the questions of my domain and lastly the quant. Speed and accuracy were the deciding factors in that test.
Duration: 45 minutes
Total Questions: 45

Round: Group Discussion
Experience: I had chosen to speak for the Sales and I was the first one to counter the person who spoke for R&D. Key was to let other's speak, listen carefully to your counterparts and have a positive body language throughout to make the moderator feel that you are very much a team person as well as you've your own standpoint.
Duration: 20 minutes

Round: Technical Interview
Experience: Technical interview was conducted face to face with 2 interviewers.
Tips: Accept what you don't know but steer the interviewers to your strong points. You have to be clear on your favorite subjects or on the previous internships or trainings done. The person sitting opposite to you will try to puzzle you on your own answers. Try to be very clear on what you say.

Round: HR Interview
Experience: HR interview was over phone call. What I felt as to crack a interview, you don't have to be too clever.
Tips: Don't panic and keep your mind free of any expectations beforehand. That's all about my personal experience. :)

College Name: Jadavpur University, Kolkata
Round 1 - One-on-one 

(2 Questions)

  • Q1. AIAG manual Daily Work Management
  • Ans. 

    The AIAG manual Daily Work Management is a guide for managing daily work activities in the automotive industry.

    • The manual provides guidelines for managing daily work activities such as production planning, scheduling, and quality control.

    • It emphasizes the importance of continuous improvement and problem-solving techniques.

    • The manual also includes tools and templates for tracking and analyzing data to identify areas for...

  • Answered by AI
  • Q2. Problem Solving in real situation

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident during interview & keep to update current Automotive situation

I applied via Recruitment Consulltant and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Hardware checking , loop checking, have u done shutdown jobs, preventive maintenance of instruments
  • Q2. Configuration of instruments
  • Ans. 

    Configuration of instruments involves setting up and adjusting instruments for optimal performance.

    • Configuration involves selecting appropriate measurement ranges and units.

    • Calibration of instruments is necessary to ensure accuracy.

    • Proper wiring and connection of instruments is crucial.

    • Configuration may also involve programming of instruments for specific tasks.

    • Regular maintenance and troubleshooting is important to en

  • Answered by AI
  • Q3. Calibration of instruments
  • Ans. 

    Calibration of instruments is a crucial process to ensure accurate and reliable measurements.

    • Calibration involves comparing the readings of an instrument to a known standard.

    • Adjustments are made to the instrument to bring it into alignment with the standard.

    • Calibration should be performed regularly to maintain accuracy.

    • Documentation of calibration procedures and results is important for quality control and compliance.

    • E...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Madina Group Instrumentation Supervisor interview:
  • Instrument Calibration
Interview preparation tips for other job seekers - Good company ,they take care of everything, salary is very low, but working environment is good,can learn new things and technology

I applied via Google and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

About knowledge and experience

Interview Preparation Tips

Topics to prepare for Madina Group Executive interview:
  • Maintenance
Interview preparation tips for other job seekers - I have done MSc from university of Karachi (Pakistan) want to do work with Madina Group for new and amazing learning

I appeared for an interview in Mar 2017.

Interview Questionnaire 

3 Questions

  • Q1. EXPERIENCE, SALARY EXPECTATION ETC
  • Q2. A-Z ABOUT ROLES AND RESPONSABILITIES ,CODES AND STANDARDS
  • Q3. RANDOM QUESTIONS TO STUDY ABOUT YOUR CHARACTOR

Interview Preparation Tips

Round: Resume Shortlist
Experience: THEY WILL SHORTLIST CANDIDATES ACCORDING TO YOUR EXPERIENCE

Arabian Industries Interview FAQs

What are the top questions asked in Arabian Industries Rigging Supervisor interview?

Some of the top questions asked at the Arabian Industries Rigging Supervisor interview -

  1. Who is responsible for a lifting p...read more
  2. What is critical lift...read more

Tell us how to improve this page.

Mechanical Supervisor
18 salaries
unlock blur

₹7.3 L/yr - ₹15 L/yr

Project Engineer
14 salaries
unlock blur

₹18 L/yr - ₹36.4 L/yr

HSE Advisor
12 salaries
unlock blur

₹15 L/yr - ₹24 L/yr

Civil Supervisor
10 salaries
unlock blur

₹5.4 L/yr - ₹12.6 L/yr

Planning Engineer
9 salaries
unlock blur

₹11 L/yr - ₹25 L/yr

Explore more salaries
Compare Arabian Industries with

Sterling Oil Exploration & Energy Production

3.7
Compare

Kuwait National Petroleum Company

4.3
Compare

Madina Group

4.5
Compare

Valmet

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview