Add office photos
Filter interviews by
Ananth Technologies Service Engineer Interview Questions, Process, and Tips
Ananth Technologies Service Engineer Interview Experiences
1 interview found
Anonymous
Selected
I applied via Walk-in and was interviewed in Apr 2023. There were 2 interview rounds.
(4 Questions)
- Q1. What is the IS in strength of concrete and steel?
- Ans.
IS stands for Indian Standard in strength of concrete and steel.
IS is a set of standards established by the Bureau of Indian Standards (BIS) for various materials used in construction.
IS codes provide guidelines for the quality, testing, and usage of materials like concrete and steel.
For example, IS 456 is the code for the design of plain and reinforced concrete structures, while IS 2062 is the code for steel used in g
- Q2. What is minimum floor level of building construction?
- Ans.
The minimum floor level of building construction varies based on local building codes and regulations.
The minimum floor level is determined by the local building codes and regulations.
It is usually measured from the ground level to the top of the finished floor.
The minimum floor level may also depend on the type of building and its intended use.
For example, in flood-prone areas, the minimum floor level may be higher to...
- Q3. What is colour codes in building?
- Ans.
Colour codes in building are used to identify different types of pipes, wires, and other building components.
Colour codes are used to ensure safety and efficiency in building construction and maintenance.
For example, red is often used to indicate electrical wires, while blue is used for water pipes.
Colour codes can also be used to indicate the function of a room or area, such as green for emergency exits.
It is importan...
- Q4. How many arc methods in commercial building design?
- Ans.
There are several arc methods used in commercial building design.
Arc flash analysis
Arc fault circuit interrupters
Arc-resistant switchgear
Arc welding
Arc blast analysis
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Aravind Raj
(3 Questions)
- Q1. Relay mechanism
- Q2. Transformer protection
- Q3. Circuit diagram
- Ans.
A circuit diagram is a visual representation of an electrical circuit showing how components are connected.
Circuit diagrams use symbols to represent components like resistors, capacitors, and transistors.
Lines represent wires connecting the components.
Arrows indicate the direction of current flow.
Circuit diagrams help engineers understand and troubleshoot circuits.
Example: A simple circuit diagram for a light bulb conn
Situational behaviour
(2 Questions)
- Q1. Previous encounters in your job
- Q2. Salary expectation and etc
Interview Preparation Tips
(2 Questions)
- Q1. Basic electrical and batteries
- Q2. Basic knowledge
Selected
I applied via Approached by Company and was interviewed in May 2023. There were 4 interview rounds.
(2 Questions)
- Q1. Basics general questions
- Q2. Why are you looking for change. How much hike are you expecting. Why do you want to change within 6 months of joining a new company in my case. Etc
(2 Questions)
- Q1. General questions from project and services.
- Q2. 1. What is risk analysis,or have you done in your previous job. 2. What is toughest job or project you handled. 3. What is safety, how would you improve it. 4. Standard of materials being used HVAC PROJECT...
- Ans.
Risk analysis involves identifying potential risks in a project or job and taking steps to mitigate them.
Risk analysis involves identifying potential hazards or risks in a project or job.
It includes assessing the likelihood of these risks occurring and the potential impact they could have.
Steps are then taken to mitigate or eliminate these risks to ensure the safety of the project and personnel.
For example, in a previo...
(2 Questions)
- Q1. Interview with regional service head
- Q2. Basics question just like HR. Even though it was difficult convince him that I'm looking for a long association with company as I was switching job within 6 months from joining a new company therefore I wa...
Selected
I applied via Naukri.com and was interviewed before Oct 2023. There was 1 interview round.
(4 Questions)
- Q1. How OSG function
- Ans.
OSG (Open Science Grid) functions as a distributed computing infrastructure for scientific research.
OSG connects resources from various institutions to create a large-scale computing grid.
Users can access computing power and storage resources through OSG for their research projects.
OSG manages job scheduling, data management, and security for the distributed computing environment.
- Q2. How VFD functions
- Ans.
A VFD (Variable Frequency Drive) controls the speed of an AC motor by varying the frequency and voltage of the power supplied to it.
VFD converts fixed frequency AC power to variable frequency AC power
It adjusts the motor speed by changing the frequency of the power supply
VFDs can improve energy efficiency by matching motor speed to the load requirements
They can also provide soft start and stop functions to reduce mecha...
- Q3. How you'll check the callback process
- Ans.
To check the callback process, I would monitor the response time, accuracy, and customer satisfaction.
Monitor the response time of callbacks to ensure they are timely
Check the accuracy of information provided during callbacks
Collect feedback from customers to gauge their satisfaction with the callback process
- Q4. Maintenance process
Skills evaluated in this interview
(3 Questions)
- Q1. Relay mechanism
- Q2. Transformer protection
- Q3. Circuit diagram
- Ans.
A circuit diagram is a visual representation of an electrical circuit showing how components are connected.
Circuit diagrams use symbols to represent components like resistors, capacitors, and transistors.
Lines represent wires connecting the components.
Arrows indicate the direction of current flow.
Circuit diagrams help engineers understand and troubleshoot circuits.
Example: A simple circuit diagram for a light bulb conn
Situational behaviour
(2 Questions)
- Q1. Previous encounters in your job
- Q2. Salary expectation and etc
Interview Preparation Tips
(2 Questions)
- Q1. Basic electrical and batteries
- Q2. Basic knowledge
Selected
I was interviewed in Dec 2024.
(2 Questions)
- Q1. How three level inverter topology work?
- Q2. Explain data centre electrical configuration with UPS.
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed before Oct 2023. There was 1 interview round.
(4 Questions)
- Q1. How OSG function
- Ans.
OSG (Open Science Grid) functions as a distributed computing infrastructure for scientific research.
OSG connects resources from various institutions to create a large-scale computing grid.
Users can access computing power and storage resources through OSG for their research projects.
OSG manages job scheduling, data management, and security for the distributed computing environment.
- Q2. How VFD functions
- Ans.
A VFD (Variable Frequency Drive) controls the speed of an AC motor by varying the frequency and voltage of the power supplied to it.
VFD converts fixed frequency AC power to variable frequency AC power
It adjusts the motor speed by changing the frequency of the power supply
VFDs can improve energy efficiency by matching motor speed to the load requirements
They can also provide soft start and stop functions to reduce mecha...
- Q3. How you'll check the callback process
- Ans.
To check the callback process, I would monitor the response time, accuracy, and customer satisfaction.
Monitor the response time of callbacks to ensure they are timely
Check the accuracy of information provided during callbacks
Collect feedback from customers to gauge their satisfaction with the callback process
- Q4. Maintenance process
Skills evaluated in this interview
Selected
I applied via Approached by Company and was interviewed in May 2023. There were 4 interview rounds.
(2 Questions)
- Q1. Basics general questions
- Q2. Why are you looking for change. How much hike are you expecting. Why do you want to change within 6 months of joining a new company in my case. Etc
(2 Questions)
- Q1. General questions from project and services.
- Q2. 1. What is risk analysis,or have you done in your previous job. 2. What is toughest job or project you handled. 3. What is safety, how would you improve it. 4. Standard of materials being used HVAC PROJECT...
- Ans.
Risk analysis involves identifying potential risks in a project or job and taking steps to mitigate them.
Risk analysis involves identifying potential hazards or risks in a project or job.
It includes assessing the likelihood of these risks occurring and the potential impact they could have.
Steps are then taken to mitigate or eliminate these risks to ensure the safety of the project and personnel.
For example, in a previo...
(2 Questions)
- Q1. Interview with regional service head
- Q2. Basics question just like HR. Even though it was difficult convince him that I'm looking for a long association with company as I was switching job within 6 months from joining a new company therefore I wa...
Ananth Technologies Interview FAQs
Tell us how to improve this page.
Ananth Technologies Interviews By Designations
- Ananth Technologies Hardware Engineer Interview Questions
- Ananth Technologies Accounting Staff Interview Questions
- Ananth Technologies Analyst Interview Questions
- Ananth Technologies Design Engineer Interview Questions
- Ananth Technologies fresher Interview Questions
- Ananth Technologies Junior Hardware Engineer Interview Questions
- Ananth Technologies Purchasing Head Interview Questions
- Ananth Technologies Senior RF Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Service Advisor Interview Questions
- Senior Service Engineer Interview Questions
- Customer Service Executive Interview Questions
- Service Technician Interview Questions
- Customer Service Associate Interview Questions
- Servicenow Developer Interview Questions
- Field Service Engineer Interview Questions
- Service Manager Interview Questions
- Show more
Ananth Technologies Service Engineer Interview Process
based on 1 interview
Interview experience
Service Engineer Interview Questions from Similar Companies
Fast track your campus placements
|
GIS Engineer
77
salaries
|  ₹1.6 L/yr - ₹3.2 L/yr |
|
Test Engineer
60
salaries
| ₹1.8 L/yr - ₹4.8 L/yr |
|
Hardware Design Engineer
52
salaries
| ₹2 L/yr - ₹10.1 L/yr |
|
Engineer
45
salaries
| ₹1.1 L/yr - ₹7.8 L/yr |
|
Junior Engineer
41
salaries
| ₹2 L/yr - ₹3.5 L/yr |
Infosys
TCS
Wipro
HCLTech
- Home >
- Interviews >
- Ananth Technologies Interview Questions >
- Ananth Technologies Service Engineer Interview Questions
