AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
ACT Plast Paints Paint Shop Engineer Interview Questions and Answers
ACT Plast Paints Paint Shop Engineer Interview Experiences
1 interview found
I applied via Walk-in and was interviewed before Feb 2021. There was 1 interview round.
Interview Preparation Tips
ROUND 2 :Managing director
Top trending discussions
Interview questions from similar companies
I applied via Referral and was interviewed before Nov 2021. There were 2 interview rounds.
(5 Questions)
- Q1. What is distillation, types of distillation, internal of distillation column, Do you know DCS/PLC
- Ans.
Distillation is a separation process used in chemical engineering to separate components of a liquid mixture based on their boiling points.
Distillation is a separation technique used to purify liquids or separate liquid mixtures.
It relies on the differences in boiling points of the components in the mixture.
The process involves heating the mixture to vaporize the more volatile component and then condensing it back into...
- Q2. What are chemical processes, do you know any processes, do you have seen any valves in daily life, what is pH, what are types of pumps
- Ans.
Chemical processes involve the transformation of raw materials into useful products using chemical reactions.
Examples of chemical processes include distillation, fermentation, and polymerization.
Valves are commonly used in chemical processes to control the flow of fluids.
pH is a measure of the acidity or basicity of a solution.
Types of pumps used in chemical processes include centrifugal pumps, positive displacement pu
- Q3. What is P&iD diagram, asking by some chemical reaction , vapor pressure, boiling point, viscosity,etc
- Q4. Have you done HAZOP study, do you know any SOP have you followed any
- Q5. How to start pump, what is two phase flow is there in pipe, control station work, ejector problem and troubleshooting, why we need vacuum in column
- Ans.
Answering questions related to starting pump, two phase flow, control station work, ejector problem and troubleshooting, and vacuum in column.
To start a pump, ensure that the suction line is filled with liquid and open the discharge valve. Then, turn on the motor and gradually open the suction valve.
Two phase flow is when both liquid and gas are present in the pipe. This can cause issues with pump performance and requi...
Interview Preparation Tips
if selected you will ask to join ASAp
Skills evaluated in this interview
Junior Engineer Interview Questions & Answers
Utkal Alumina International
Anonymous
posted on 27 Oct 2021
I applied via Walk-in and was interviewed in May 2021. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. What is the process isolation require in any equipment to be maiñtance job ?
- Ans.
Process isolation is required in equipment maintenance jobs to ensure safety and prevent damage.
Process isolation involves disconnecting the equipment from its power source and locking out any potential sources of energy.
This is done to prevent accidental start-up or release of stored energy during maintenance.
Examples of process isolation methods include lockout/tagout procedures, electrical isolation, and mechanical ...
- Q2. What is the safety require in plant entry.?
- Ans.
Safety requirements for plant entry include personal protective equipment, training, and following established procedures.
Wearing appropriate personal protective equipment (PPE) such as hard hats, safety glasses, and steel-toed boots
Completing required safety training before entering the plant
Following established procedures for entering and exiting the plant, including checking in with security and obtaining necessary...
- Q3. What is my responsibility your company?
Interview Preparation Tips
Junior Engineer Interview Questions & Answers
Utkal Alumina International
Anonymous
posted on 20 Aug 2022
I applied via Approached by Company and was interviewed before Aug 2021. There were 4 interview rounds.
Aptitude and technical test
(1 Question)
- Q1. Practical experience based technical questions
(1 Question)
- Q1. Behavioural, Salaries and accomodation discussion
Interview Preparation Tips
Junior Engineer Interview Questions & Answers
Utkal Alumina International
Anonymous
posted on 26 Dec 2023
Selected
I applied via Campus Placement and was interviewed before Dec 2022. There were 3 interview rounds.
English
Reasoning
Chemical engineering questions
Etc
(1 Question)
- Q1. All chemical engineering studies
Production Engineer Interview Questions & Answers
Hindusthan Chemical Company
Anonymous
posted on 12 Oct 2023
Selected
I applied via Approached by Company and was interviewed in Apr 2023. There were 2 interview rounds.
(3 Questions)
- Q1. How many types of reactors are there
- Ans.
There are several types of reactors used in production engineering, including batch reactors, continuous stirred-tank reactors, and plug flow reactors.
Batch reactors: Used for small-scale production and testing, where all the reactants are added at the beginning and allowed to react before being removed.
Continuous stirred-tank reactors (CSTR): Reactants are continuously added and removed while being mixed in the reacto...
- Q2. What is an evaporator? What is an evaporator?
- Ans.
An evaporator is a device used to turn liquid into vapor by heating or reducing pressure.
An evaporator is commonly used in refrigeration systems to remove heat from a substance.
It is also used in distillation processes to separate components based on their boiling points.
Evaporators can be found in industries such as food processing, chemical manufacturing, and power generation.
Examples of evaporators include falling f...
- Q3. What is the temperature
- Ans.
The temperature refers to the degree of hotness or coldness of a substance or environment.
Temperature is measured in units such as Celsius, Fahrenheit, or Kelvin.
It can affect the behavior of materials and processes in engineering.
Examples include monitoring the temperature of machinery to prevent overheating or controlling the temperature of a chemical reaction.
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed in Apr 2024. There was 1 interview round.
(3 Questions)
- Q1. Last plant releted Questions.
- Ans. Process previous plat type of reaction
- Q2. Heat exchanger distitlion and furnace cl2 handing
- Ans. Type of heat exchanger working . distitlion proces . Type of distitlion.
- Q3. Fire and safety
Interview Preparation Tips
- Distillation
- Cl2 handing
- Furnace
- Acid handling
- Sefty
- Last plant process
- Chemical handling
- PPE
I applied via Recruitment Consultant and was interviewed in Apr 2020. There were 3 interview rounds.
Interview Questionnaire
3 Questions
- Q1. Unit operation & Process
- Q2. Chemical Engineering HMT Basically question.
- Q3. System is normal .....
Interview Preparation Tips
Project Engineer Interview Questions & Answers
Demech Chemical Products
Anonymous
posted on 2 Mar 2024
Selected
I applied via Referral and was interviewed in Feb 2024. There was 1 interview round.
(2 Questions)
- Q1. What are the projects handled in previous organisation?
- Q2. What are the, most challenging situation in the projects and How did you handle that ?
Interview Preparation Tips
Project Engineer Interview Questions & Answers
Demech Chemical Products
Samresh Anand
posted on 17 Jul 2024
(2 Questions)
- Q1. What is your work experience.
- Q2. Tell me about our equipments.
- Ans.
Our equipments include state-of-the-art machinery and tools designed for precision and efficiency.
We have a range of equipment for various tasks such as drilling, cutting, welding, and measuring.
Some examples of our equipment include CNC machines, laser cutters, 3D printers, and precision measuring tools.
Our equipment is regularly maintained and upgraded to ensure optimal performance and safety.
ACT Plast Paints Interview FAQs
Tell us how to improve this page.
ACT Plast Paints Interviews By Designations
- ACT Plast Paints Engineer Interview Questions
- ACT Plast Paints Quality Engineer Interview Questions
- ACT Plast Paints Electrical Service Engineer Interview Questions
- ACT Plast Paints Assistant Manager- HR Interview Questions
- ACT Plast Paints Electrical Maintenance Technician Interview Questions
- ACT Plast Paints Quality Inspector Interview Questions
- ACT Plast Paints Paint Shop Engineer Interview Questions
- ACT Plast Paints Operating Executive Interview Questions
- Show more
Interview Questions for Popular Designations
- Manager - Paint Shop Interview Questions
- Painting Supervisor Interview Questions
- Paint Shop Supervisor Interview Questions
- Painter Interview Questions
- Spray Painter Interview Questions
- Blasting and Painting Supervisor Interview Questions
- Junior Shop Manager Interview Questions
- Paintshop Production Engineer Interview Questions
- Show more
Interview Questions from Similar Companies
ACT Plast Paints Paint Shop Engineer Reviews and Ratings
based on 2 reviews
Rating in categories
|
Junior Engineer
57
salaries
|  ₹2 L/yr - ₹3.9 L/yr |
|
Senior Engineer
26
salaries
| ₹4.5 L/yr - ₹7.2 L/yr |
|
Quality Engineer
22
salaries
| ₹1.8 L/yr - ₹3.7 L/yr |
|
Assistant Manager
20
salaries
| ₹6.5 L/yr - ₹9.5 L/yr |
|
Associate
20
salaries
| ₹1.6 L/yr - ₹3 L/yr |
British Paints
HEUBACH Colour
Satyesh Brinechem
Utkal Alumina International
- Home >
- Interviews >
- ACT Plast Paints Interview Questions >
- ACT Plast Paints Paint Shop Engineer Interview Questions
