Upload Button Icon Add office photos

Filter interviews by

Aarti Drugs Electrical Engineer Interview Questions, Process, and Tips

Updated 19 Mar 2024

Aarti Drugs Electrical Engineer Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. Star delta Starter control diagram
  • Ans. 

    Star delta starter is a method used to reduce the starting current of induction motors.

    • Star delta starter is used for starting induction motors in applications where the starting current needs to be limited.

    • In star connection, the motor windings are connected in a star configuration during starting to reduce the voltage across each winding.

    • After a certain time, the windings are switched to a delta configuration to run ...

  • Answered by AI
  • Q2. How to find motor current formulas
  • Ans. 

    Motor current formulas can be found using basic electrical principles and motor specifications.

    • Use Ohm's Law (I = V / R) to calculate current based on voltage and resistance.

    • For AC motors, use the formula I = P / (sqrt(3) * V * cos(theta)), where P is power, V is voltage, and theta is the power factor angle.

    • Refer to motor datasheets for specific current ratings and calculations.

    • Consider factors like efficiency, power f...

  • Answered by AI
  • Q3. Protection in a transformer
  • Ans. 

    Protection in a transformer involves measures to prevent damage from overcurrent, overvoltage, and overheating.

    • Use fuses or circuit breakers to protect against overcurrent

    • Install surge arresters to protect against overvoltage

    • Use temperature sensors and cooling systems to prevent overheating

    • Implement differential protection to detect internal faults

    • Regular maintenance and testing to ensure proper functioning

  • Answered by AI
  • Q4. Faults in a transformer
  • Ans. 

    Faults in a transformer can include short circuits, open circuits, overheating, and insulation breakdown.

    • Short circuits can occur due to insulation failure or winding damage.

    • Open circuits can result from broken connections or faulty windings.

    • Overheating may be caused by overloading or poor cooling.

    • Insulation breakdown can lead to arcing and short circuits.

  • Answered by AI

Interview questions from similar companies

Interview Questionnaire 

2 Questions

  • Q1. What is the work of electrical engineering in company?
  • Q2. What is the facilities in company?

I applied via Walk-in and was interviewed in Jul 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. I want job for electrical maintenance, engg department

Interview Preparation Tips

Interview preparation tips for other job seekers - Electrical basic and practically all electrical systems breakers, transformer, pm, as per schedule hvac system
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Mar 2023. There were 4 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. All technical questions in a walkin interview.
Round 2 - Technical 

(1 Question)

  • Q1. All detailed questions & HR round together.
Round 3 - Technical 

(1 Question)

  • Q1. Final technical round with DGM & Head level.
Round 4 - One-on-one 

(1 Question)

  • Q1. With Site Head.

Interview Preparation Tips

Interview preparation tips for other job seekers - Always be honest & Ask what you need. No employer is looking for THE best employee, but they need a trustworthy, reliable & optimistic person to join their team. Ofcourse there are pro & cons of everything, but adding value to your team & become valuable asset to the organisation should only be your focus. Everything else will follow.
Round 1 - HR 

(8 Questions)

  • Q1. What are your salary expectations?
  • Q2. What is your family background?
  • Q3. Share details of your previous job.
  • Q4. Why should we hire you?
  • Q5. Why are you looking for a change?
  • Q6. Where do you see yourself in 5 years?
  • Q7. What are your strengths and weaknesses?
  • Q8. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - Maintenance work
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Basic appti ques were asked

Round 3 - Technical 

(3 Questions)

  • Q1. Basic knowledge about electrical engineering is must to clear it
  • Q2. What is transformer types
  • Ans. 

    Transformer types include step-up, step-down, isolation, autotransformer, and instrument transformer.

    • Step-up transformer increases voltage while decreasing current

    • Step-down transformer decreases voltage while increasing current

    • Isolation transformer separates primary and secondary windings

    • Autotransformer has a single winding with multiple taps for voltage adjustment

    • Instrument transformer is used for measuring current or

  • Answered by AI
  • Q3. Motors & it's types
  • Ans. 

    Motors are devices that convert electrical energy into mechanical energy. There are various types of motors.

    • DC motors: used in appliances, toys, and automobiles

    • AC motors: used in industrial machinery and household appliances

    • Stepper motors: used in robotics and automation

    • Servo motors: used in precision control applications

    • Brushless motors: used in drones and electric vehicles

  • Answered by AI
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Kjjlsjls jkajilaui lkjdsiuusrsu jusorrs jrsoisroirsoi heiffue bxmxgfsfrt bggh jhgutrt gkjtyereer vfgyj gg ghyj rrtr grey hyr
  • Q2. Fgdreefwewewewewewew hgtr ftrryerehnm,hjyjr hjkugugt

Interview Preparation Tips

Interview preparation tips for other job seekers - Submit a decent resume
Waiting for study CV
Identify type Job Looking
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. About the power system and equipment maintenance
  • Q2. Operational excellence initiatives.

I applied via Other and was interviewed in Apr 2020. There were 4 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Technical knowledge questions depending on experience.
  • Q2. Why you want to leave the current post.
  • Q3. For better prospects.

Interview Preparation Tips

Interview preparation tips for other job seekers - Have positive attitudes.be prepared for technical knowledge and skills.
Attend all and maximum interviews to strengthen your confidence.

I applied via Walk-in and was interviewed before Sep 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Introduction, communication skill, current ctc, expected ctc
Round 3 - Technical 

(1 Question)

  • Q1. Guidelines, sops, cGxP, skill

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for introduced, sops, guidelines, positive attitude, english speaking, gdp, gmp, 21cfr

Aarti Drugs Interview FAQs

How many rounds are there in Aarti Drugs Electrical Engineer interview?
Aarti Drugs interview process usually has 1 rounds. The most common rounds in the Aarti Drugs interview process are Technical.
What are the top questions asked in Aarti Drugs Electrical Engineer interview?

Some of the top questions asked at the Aarti Drugs Electrical Engineer interview -

  1. How to find motor current formu...read more
  2. Star delta Starter control diag...read more
  3. Protection in a transfor...read more

Tell us how to improve this page.

Aarti Drugs Electrical Engineer Interview Process

based on 1 interview

Interview experience

3
  
Average
View more

Interview Questions from Similar Companies

Cipla Interview Questions
4.1
 • 486 Interviews
Dr. Reddy's Interview Questions
4.0
 • 404 Interviews
Lupin Interview Questions
4.2
 • 340 Interviews
Aurobindo Pharma Interview Questions
4.0
 • 239 Interviews
Ipca Laboratories Interview Questions
3.9
 • 156 Interviews
View all
Aarti Drugs Electrical Engineer Salary
based on 12 salaries
₹1.7 L/yr - ₹3.3 L/yr
47% less than the average Electrical Engineer Salary in India
View more details

Aarti Drugs Electrical Engineer Reviews and Ratings

based on 4 reviews

4.7/5

Rating in categories

3.7

Skill development

4.7

Work-life balance

2.3

Salary

3.7

Job security

4.1

Company culture

2.3

Promotions

3.7

Work satisfaction

Explore 4 Reviews and Ratings
Production Officer
177 salaries
unlock blur

₹1 L/yr - ₹3.8 L/yr

QC Officer
91 salaries
unlock blur

₹1.3 L/yr - ₹3 L/yr

QC Chemist
60 salaries
unlock blur

₹1.4 L/yr - ₹3 L/yr

Maintenance Engineer
53 salaries
unlock blur

₹1.5 L/yr - ₹3.2 L/yr

Quality Control Officer
52 salaries
unlock blur

₹1.4 L/yr - ₹2.5 L/yr

Explore more salaries
Compare Aarti Drugs with

Cipla

4.1
Compare

Dr. Reddy's

4.0
Compare

Lupin

4.1
Compare

Zydus Lifesciences

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview