Quality Assurance Quality Control Engineer

Quality Assurance Quality Control Engineer Interview Questions and Answers for Freshers

Updated 31 Aug 2024
search-icon

Q1. What is the difference between the Workability and Durability of the Concrete ?

Ans.

Workability refers to the ease of handling and placing concrete, while durability refers to its ability to withstand environmental and service conditions.

  • Workability is influenced by factors such as water content, aggregate size, and admixtures.

  • Workable concrete can be easily mixed, transported, and placed without segregation or excessive bleeding.

  • Durability is affected by factors like the water-cement ratio, cement content, and curing conditions.

  • Durable concrete can resist d...read more

Q2. What is the relation between the Characteristic Strength and Water Cement Ratio of the Concrete ?

Ans.

The characteristic strength of concrete is influenced by the water-cement ratio.

  • The water-cement ratio is the ratio of the weight of water to the weight of cement used in the concrete mix.

  • A lower water-cement ratio generally results in higher characteristic strength.

  • A higher water-cement ratio can lead to lower characteristic strength and reduced durability.

  • The water-cement ratio affects the hydration process and the overall density and strength of the concrete.

  • For example, a...read more

Q3. What is the density of DI, MS and HDPE Pipes ?

Ans.

The density of DI, MS, and HDPE pipes varies depending on their composition and manufacturing process.

  • Density is a measure of mass per unit volume.

  • DI (Ductile Iron) pipes have a density of approximately 7.2 g/cm³.

  • MS (Mild Steel) pipes have a density of around 7.85 g/cm³.

  • HDPE (High-Density Polyethylene) pipes have a density ranging from 0.93 to 0.97 g/cm³.

  • The density of pipes is an important factor in determining their strength and suitability for different applications.

Q4. What is the pressure range of DI and HDPE Pipes ?

Ans.

The pressure range of DI and HDPE pipes varies depending on their size and application.

  • The pressure range of DI (Ductile Iron) pipes typically ranges from 150 psi to 350 psi.

  • HDPE (High-Density Polyethylene) pipes have a pressure range of 100 psi to 300 psi.

  • The pressure rating of pipes also depends on their diameter and wall thickness.

  • For example, a 4-inch DI pipe with a wall thickness of 0.25 inches may have a pressure rating of 250 psi.

  • It is important to consult the manufact...read more

Are these interview questions helpful?

Q5. What is ppe,8d,rtj,ppc,

Ans.

PPE stands for Personal Protective Equipment, 8D is a problem-solving methodology, RTJ refers to Ring Type Joint, PPC stands for Production Part Approval Process.

  • PPE: equipment worn to minimize exposure to hazards (e.g. gloves, goggles)

  • 8D: Eight Disciplines problem-solving method (e.g. root cause analysis)

  • RTJ: type of gasket used in high-pressure applications (e.g. oil and gas pipelines)

  • PPC: process to ensure production parts meet quality standards before mass production

Q6. What is vernier list count

Ans.

Vernier list count is a method used in quality control to track and count the number of items in a list.

  • Vernier list count is a technique used to accurately count items in a list or inventory.

  • It involves using a vernier scale or caliper to measure and count the items with precision.

  • This method is commonly used in manufacturing and quality control processes to ensure accurate inventory management.

  • For example, in a production line, a QA engineer may use vernier list count to ve...read more

Share interview questions and help millions of jobseekers 🌟

man-with-laptop

Q7. What is the quality

Ans.

Quality is the degree of excellence of a product or service as perceived by the customer.

  • Quality is meeting or exceeding customer expectations

  • It involves consistency, reliability, and durability

  • Quality is achieved through effective quality assurance and quality control processes

  • Examples: meeting specifications, absence of defects, customer satisfaction

Q8. Least count of vernier caliper

Ans.

The least count of a vernier caliper is the smallest measurement that can be read on the scale.

  • The least count is determined by the number of divisions on the main scale and the vernier scale.

  • It is calculated by dividing the smallest division on the main scale by the number of divisions on the vernier scale.

  • For example, if the smallest division on the main scale is 0.1 mm and the vernier scale has 10 divisions, the least count would be 0.01 mm.

  • The least count represents the a...read more

Quality Assurance Quality Control Engineer Jobs

Quality Control and Assurance Engineer 3-8 years
Rajuri Steel Pvt. Ltd.
4.3
Jalna
Quality Assurance and Control Engineer 3-6 years
Viviid Renewables
4.2
Mumbai
Quality Assurance and Quality Control Engineer 0-2 years
Ameya Finishing Solutions Pvt Ltd
3.5
₹ 2 L/yr - ₹ 2 L/yr
Pune
Interview Tips & Stories
Ace your next interview with expert advice and inspiring stories

Interview experiences of popular companies

4.1
 • 5k Interviews
4.0
 • 267 Interviews
3.8
 • 134 Interviews
4.1
 • 80 Interviews
3.6
 • 60 Interviews
3.9
 • 52 Interviews
4.0
 • 51 Interviews
4.2
 • 45 Interviews
View all

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary

Quality Assurance Quality Control Engineer Interview Questions
Share an Interview
Stay ahead in your career. Get AmbitionBox app
qr-code
Helping over 1 Crore job seekers every month in choosing their right fit company
65 L+

Reviews

4 L+

Interviews

4 Cr+

Salaries

1 Cr+

Users/Month

Contribute to help millions

Made with ❤️ in India. Trademarks belong to their respective owners. All rights reserved © 2024 Info Edge (India) Ltd.

Follow us
  • Youtube
  • Instagram
  • LinkedIn
  • Facebook
  • Twitter