Upload Button Icon Add office photos

Filter interviews by

ZOOMLION Service Engineer Interview Questions, Process, and Tips

Updated 4 Nov 2024

ZOOMLION Service Engineer Interview Experiences

1 interview found

Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(5 Questions)

  • Q1. Psi mins full form
  • Ans. 

    PSI stands for Pounds per Square Inch, a unit of pressure measurement commonly used in engineering and physics.

    • PSI is used to measure pressure in various systems, such as in pneumatic tools, hydraulic systems, and air compressors.

    • 1 PSI is equal to 0.068046 atmospheres or 6,894.76 Pascals.

    • For example, a car tire may require inflation to 32 PSI for optimal performance.

  • Answered by AI
  • Q2. Firing strocks position
  • Ans. 

    Firing strokes position refers to the position of the firing strokes in an engine.

    • Firing strokes position is crucial for the proper functioning of the engine.

    • The firing order of the engine determines the position of the firing strokes.

    • Incorrect firing strokes position can lead to engine misfires or damage.

    • Common firing orders include 1-3-4-2 for a 4-cylinder engine and 1-8-4-3-6-5-7-2 for a V8 engine.

  • Answered by AI
  • Q3. How to work hyd.pump
  • Ans. 

    To work a hydraulic pump, you need to understand its components and operation.

    • Understand the basic components of a hydraulic pump such as the inlet, outlet, and pistons.

    • Ensure the pump is properly connected to a power source and the hydraulic system.

    • Monitor the pump's pressure and flow rate to ensure optimal performance.

    • Regularly check and maintain the pump to prevent any malfunctions or breakdowns.

    • Examples: Gear pump,

  • Answered by AI
  • Q4. Injectors leack off test
  • Q5. How to use torque gun
  • Ans. 

    A torque gun is a tool used to apply torque to fasteners such as nuts and bolts.

    • Ensure the torque gun is set to the correct torque value for the fastener being tightened.

    • Hold the torque gun perpendicular to the fastener and apply pressure while pulling the trigger.

    • Listen for the click or beep indicating the desired torque has been reached.

    • Do not over-tighten the fastener as it can cause damage.

    • Regularly calibrate and m

  • Answered by AI

Interview questions from similar companies

I was interviewed before Jul 2016.

Interview Preparation Tips

Round: Test
Experience: Nice round & iam appeared in test
Tips: Knowledge of automobile is must
Duration: 1 hour 30 minutes
Total Questions: 50

I applied via PLACEMENT

Interview Preparation Tips

Round: Technical Interview
Experience: Good detailed interview in terms of technical knowledge
Tips: Should be thorough with the projects you have done during the course

General Tips: be confident of what you put in your resume
Technical knowledge regarding projects undertaken during engineering should be sound
Be confident
Skills: Communication, Thinking capability, knowledge applying capability
College Name: V.E.S Institute Of Technology
Motivation: Opportunity to work in a renowned and core technical company
Funny Moments: We consider the interview panelists to be as tough as our viva externals. Interviewers are mostly on your side(contrary to viva professors :P)

I was interviewed before Sep 2016.

Interview Questionnaire 

1 Question

  • Q1. Ocampo, basic electronics and C

Interview Preparation Tips

Round: Test
Duration: 1 hour
Total Questions: 50

Skills: Embedded Systems, C Programming
College Name: Sahyadri college of engineering

Interview Questionnaire 

1 Question

  • Q1. How get perform to more development

Interview Questionnaire 

5 Questions

  • Q1. Pertaining to the mentioned roles and responsibilities in your resume
  • Q2. Planning and work order creation
  • Q3. Piling activities
  • Q4. Introduction
  • Q5. Cross checking of documents

Interview Preparation Tips

Round: Resume Shortlist
Experience: On the criteria that I scored atleast 60% overall and had no gap between job/s.

I applied via Referral and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Maintenance phylosophy
  • Ans. Depends on equipment running hour, criticality, availability and standby.
  • Answered Anonymously

Interview Preparation Tips

Topics to prepare for Thermax Limited Senior Engineer interview:
  • Boe
  • Energy manager
Interview preparation tips for other job seekers - Be confidential and technically strong.

Interview Questionnaire 

1 Question

  • Q1. What is your role in previous company
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. IC engine , project, CNC
Round 3 - Technical 

(1 Question)

  • Q1. Compressor, Diploma Project

I applied via Campus Placement and was interviewed before Jun 2021. There were 3 interview rounds.

Round 1 - Aptitude Test 

Mathematics, English, Reasoning

Round 2 - Technical 

(2 Questions)

  • Q1. They asked Technical questions
  • Q2. What is antenna What is satcom
  • Ans. 

    An antenna is a device that converts electrical signals into electromagnetic waves and vice versa. Satcom is short for satellite communication.

    • Antennas are used for transmitting and receiving signals in various applications such as radio, television, and wireless communication.

    • Satcom refers to the use of satellites for communication purposes, including television broadcasting, internet access, and military communicatio...

  • Answered by AI
Round 3 - Group Discussion 

Clean India
Corruption

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and believe in yourself

ZOOMLION Interview FAQs

How many rounds are there in ZOOMLION Service Engineer interview?
ZOOMLION interview process usually has 1 rounds. The most common rounds in the ZOOMLION interview process are Technical.
What are the top questions asked in ZOOMLION Service Engineer interview?

Some of the top questions asked at the ZOOMLION Service Engineer interview -

  1. How to use torque ...read more
  2. How to work hyd.p...read more
  3. Firing strocks posit...read more

Tell us how to improve this page.

ZOOMLION Service Engineer Interview Process

based on 2 interviews

Interview experience

2.5
  
Poor
View more
ZOOMLION Service Engineer Salary
based on 38 salaries
₹2 L/yr - ₹9.3 L/yr
18% more than the average Service Engineer Salary in India
View more details

ZOOMLION Service Engineer Reviews and Ratings

based on 12 reviews

3.7/5

Rating in categories

2.8

Skill development

3.0

Work-life balance

3.4

Salary

2.5

Job security

2.9

Company culture

2.6

Promotions

2.8

Work satisfaction

Explore 12 Reviews and Ratings
Service Engineer
38 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Sales Engineer
20 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Logistics Executive
8 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Regional Manager
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Sales Engineer
6 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare ZOOMLION with

Tata Group

4.2
Compare

Mahindra & Mahindra

4.1
Compare

Larsen & Toubro Limited

4.0
Compare

BHEL

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview