Upload Button Icon Add office photos

Filter interviews by

Willowood Industries Technician Engineer Interview Questions and Answers

Updated 17 Nov 2023

Willowood Industries Technician Engineer Interview Experiences

1 interview found

Technician Engineer Interview Questions & Answers

user image DIPTESH N. GOHIL

posted on 17 Nov 2023

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Nov 2022. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Radar Lt ranging
  • Q2. How can cable laying
  • Ans. 

    Cable laying can be done efficiently by following proper planning, preparation, and execution.

    • Plan the cable route to avoid obstacles and ensure proper support

    • Prepare the area by clearing any obstructions and ensuring safety measures are in place

    • Use appropriate tools and equipment for laying the cables

    • Secure the cables properly to prevent damage and ensure longevity

    • Test the cables after installation to ensure proper fu

  • Answered by AI
  • Q3. All types flow meter working and installing
  • Ans. 

    Flow meters are devices used to measure the flow rate of a fluid in a pipe or conduit.

    • Different types of flow meters include electromagnetic, ultrasonic, vortex shedding, and turbine meters.

    • Flow meters can be installed in various ways, such as inline, insertion, or clamp-on.

    • Proper calibration and maintenance are essential for accurate flow measurement.

    • Examples of flow meter manufacturers include Siemens, Emerson, and E

  • Answered by AI
Round 2 - HR 

(3 Questions)

  • Q1. Talk about salary
  • Q2. Family background
  • Q3. Joining process

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Oct 2024. There was 1 interview round.

Round 1 - HR 

(6 Questions)

  • Q1. What is the transformer?
  • Ans. 

    A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.

    • Transformers are used to increase or decrease voltage levels in electrical circuits.

    • They consist of two coils of wire, known as the primary and secondary coils.

    • The primary coil is connected to the input voltage source, while the secondary coil is connected to the output load.

    • Transformers...

  • Answered by AI
  • Q2. What is the UPS?
  • Ans. 

    UPS stands for Uninterruptible Power Supply, a device that provides emergency power to a load when the input power source fails.

    • UPS ensures continuous power supply during power outages or fluctuations

    • It typically consists of a battery, inverter, and charger

    • Commonly used in data centers, hospitals, and critical infrastructure

    • Examples include APC, CyberPower, and Eaton UPS systems

  • Answered by AI
  • Q3. What is MCB ?
  • Ans. 

    MCB stands for Miniature Circuit Breaker, a device designed to protect electrical circuits from overloads and short circuits.

    • MCB is a type of circuit breaker that automatically switches off electrical circuits during abnormal conditions like overload or short circuit.

    • It is commonly used in residential and commercial electrical installations to protect electrical equipment and prevent electrical fires.

    • MCBs are available...

  • Answered by AI
  • Q4. Current and Voltage difference?
  • Ans. 

    Current is the flow of electric charge, measured in Amperes, while voltage is the force that drives the current, measured in Volts.

    • Current is the rate of flow of electric charge in a circuit.

    • Voltage is the electrical potential difference that drives the current.

    • Current is measured in Amperes (A) while Voltage is measured in Volts (V).

    • Ohm's Law relates current, voltage, and resistance: V = I * R.

  • Answered by AI
  • Q5. What is the CT AND PT?
  • Ans. 

    CT and PT are electrical devices used in power systems to measure current and voltage respectively.

    • CT stands for Current Transformer and is used to measure high currents by stepping down the current to a lower value.

    • PT stands for Potential Transformer and is used to measure high voltages by stepping down the voltage to a lower value.

    • CTs and PTs are commonly used in power distribution systems to provide accurate measure

  • Answered by AI
  • Q6. What is the last rating MCB hou to the amps
  • Ans. 

    The last rating MCB can go up to 125 amps.

    • The last rating MCB can typically go up to 125 amps.

    • MCBs are available in various ratings such as 6A, 10A, 16A, 32A, 63A, and 125A.

    • The rating of an MCB determines the maximum current it can safely handle before tripping.

    • For higher current requirements, larger MCBs or other protective devices like MCCBs may be used.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good skills

Electrical Technician Interview Questions & Answers

Jio user image john pradhan pradhan

posted on 29 Jun 2024

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. If there Hazzard is occur so what should we do first
  • Ans. 

    The first thing to do in case of a hazard is to ensure the safety of yourself and others.

    • Assess the situation to determine the nature and extent of the hazard.

    • Alert others in the vicinity about the hazard.

    • Follow safety protocols and procedures to mitigate the hazard.

    • Contact emergency services if necessary.

    • Evacuate the area if instructed to do so.

  • Answered by AI
  • Q2. What should you do when their is no EV
  • Q3. Also the DG suddenly stopped
Round 2 - Technical 

(2 Questions)

  • Q1. What should u do when dg fuel dosnot passess through a enjector
  • Ans. 

    Check for clogs in the fuel line, inspect the injector for damage, clean or replace the injector if necessary.

    • Inspect the fuel line for any clogs or blockages

    • Check the injector for any damage or malfunction

    • Clean the injector using appropriate tools and techniques

    • If cleaning doesn't work, consider replacing the injector

    • Ensure proper fuel flow and pressure to the injector

  • Answered by AI
  • Q2. How van we know earth leacage
  • Ans. 

    Earth leakage can be detected using a residual current device (RCD) or ground fault circuit interrupter (GFCI).

    • Earth leakage can be detected by measuring the difference in current between the live and neutral wires in a circuit.

    • A residual current device (RCD) or ground fault circuit interrupter (GFCI) can be used to detect earth leakage and quickly disconnect the power supply to prevent electric shock.

    • Regular testing o...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Group Discussion 

Kool to the core of up to the mark

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Introduction reference
  • Q2. Qualifications reference
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Computer and software
  • Q2. Series of programs, data and instructions used in a computer's hardware to help the device operate and you complete tasks. Hardware is the physical components that comprise a computer, such as the graphics...
  • Ans. 

    Software is a collection of programs, data, and instructions that enable a computer to perform tasks.

    • Software is the intangible part of a computer system.

    • It includes operating systems, applications, and utilities.

    • Examples of software include Microsoft Windows, Adobe Photoshop, and Google Chrome.

  • Answered by AI

Skills evaluated in this interview

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Coding Test 

Easy questions, not much to say

Round 2 - HR 

(1 Question)

  • Q1. General questions. salary discussions. nothing much
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Aug 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. What technical is
  • Ans. 

    Yes I am iti fitter and electrical work experience 10 years

  • Answered Anonymously
  • Q2. Power cut working stop
  • Ans. 

    Power cut no working stop on invator working start

  • Answered Anonymously
  • Q3. Short sircut mcb work
  • Ans. 

    No mcb work on short sircut so short sir cut working Power on

  • Answered Anonymously
  • Q4. Power cut woking on benk
Round 3 - Technical 

(4 Questions)

  • Q1. Benk work good is
  • Q2. Work on benk technical
  • Q3. Power cut benking work
  • Q4. Jow do benk working

Interview Preparation Tips

Interview preparation tips for other job seekers - Job you request
Interview experience
5
Excellent
Difficulty level
-
Process Duration
Less than 2 weeks
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. Some technical questions related to your field, if experience than related to
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
-
Result
-

I applied via campus placement at National Institute of Technology (NIT), Raipur

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Aptitude Test 

It was good and hectic

Round 3 - Coding Test 

Focus on dsa and puzzles

Round 4 - One-on-one 

(1 Question)

  • Q1. Graphs trees maps hash
Round 5 - One-on-one 

(1 Question)

  • Q1. Coding problems

Willowood Industries Interview FAQs

How many rounds are there in Willowood Industries Technician Engineer interview?
Willowood Industries interview process usually has 3 rounds. The most common rounds in the Willowood Industries interview process are Resume Shortlist, Technical and HR.
What are the top questions asked in Willowood Industries Technician Engineer interview?

Some of the top questions asked at the Willowood Industries Technician Engineer interview -

  1. All types flow meter working and install...read more
  2. How can cable lay...read more
  3. Radar Lt rang...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 Willowood Industries interview
WalkIn
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.1k Interviews
Accenture Interview Questions
3.9
 • 7.8k Interviews
Infosys Interview Questions
3.7
 • 7.4k Interviews
Wipro Interview Questions
3.7
 • 5.5k Interviews
Cognizant Interview Questions
3.8
 • 5.4k Interviews
Amazon Interview Questions
4.1
 • 4.9k Interviews
Capgemini Interview Questions
3.8
 • 4.7k Interviews
Tech Mahindra Interview Questions
3.6
 • 3.7k Interviews
HCLTech Interview Questions
3.6
 • 3.6k Interviews
Genpact Interview Questions
3.9
 • 2.9k Interviews
View all
Plant Operator
22 salaries
unlock blur

₹2.9 L/yr - ₹6 L/yr

Executive
9 salaries
unlock blur

₹2.5 L/yr - ₹6.8 L/yr

Production Officer
7 salaries
unlock blur

₹2 L/yr - ₹6 L/yr

Instrumentation Technician
7 salaries
unlock blur

₹3.6 L/yr - ₹6 L/yr

Electrical Technician
7 salaries
unlock blur

₹3.3 L/yr - ₹4.3 L/yr

Explore more salaries
Compare Willowood Industries with

BASF

4.5
Compare

Bayer Crop Science Vegetable Seeds

4.4
Compare

Syngenta

4.3
Compare

UPL

4.1
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview