Upload Button Icon Add office photos

Filter interviews by

Wen Lighting Interior Architect Interview Questions and Answers

Updated 6 Jan 2022

Wen Lighting Interior Architect Interview Experiences

1 interview found

I applied via Recruitment Consultant and was interviewed in Dec 2021. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. 1.) Educational details
  • Q2. 2.) Work experience
  • Q3. Field of intrest

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview was good,
HR was very co-operrating.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Recruitment Consulltant and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. Plastic defects?
  • Q2. What is molding?
  • Ans. 

    Molding is a manufacturing process where a liquid or pliable material is poured into a mold to create a specific shape.

    • Molding involves heating a material until it becomes pliable, then shaping it using a mold.

    • Common types of molding include injection molding, blow molding, and compression molding.

    • Examples of molded products include plastic bottles, car parts, and toys.

  • Answered by AI
  • Q3. Plastic prevention?
  • Q4. How to devloped plastic parts? what method are used?
  • Ans. 

    Plastic parts are developed using methods like injection molding, blow molding, and thermoforming.

    • Injection molding is a common method where molten plastic is injected into a mold.

    • Blow molding is used for hollow parts like bottles, where plastic is blown into a mold.

    • Thermoforming involves heating a plastic sheet and shaping it over a mold.

    • Other methods include rotational molding, extrusion, and compression molding.

  • Answered by AI
  • Q5. What is shrinkage in plastic?
  • Ans. 

    Shrinkage in plastic refers to the reduction in size of a plastic part after it has been molded.

    • Shrinkage occurs as the plastic cools and solidifies after being injected into a mold.

    • It is important to account for shrinkage when designing molds and parts to ensure proper dimensions.

    • Factors affecting shrinkage include material type, mold temperature, cooling rate, and part geometry.

    • Common methods to compensate for shrink...

  • Answered by AI
Round 3 - Technical 

(5 Questions)

  • Q1. What is work of npd in industry?
  • Ans. 

    NPD in industry refers to New Product Development, which involves the process of designing, creating, and bringing new products to market.

    • NPD involves identifying market opportunities and customer needs

    • It includes concept development, design, prototyping, testing, and commercialization

    • NPD teams often collaborate with various departments such as marketing, engineering, and manufacturing

    • Successful NPD can lead to increas...

  • Answered by AI
  • Q2. How to calculate costing of complete products?
  • Ans. 

    Costing of complete products can be calculated by considering materials, labor, overhead, and profit margin.

    • Calculate the cost of materials required for the product

    • Estimate the labor costs involved in manufacturing the product

    • Factor in overhead costs such as utilities, rent, and equipment depreciation

    • Add a profit margin to cover additional expenses and generate profit

    • Consider any additional costs such as shipping, pack...

  • Answered by AI
  • Q3. What is gate & runner in molding? &
  • Ans. 

    Gate & runner in molding are channels through which molten material is injected into the mold cavity.

    • Gate is the opening through which molten material enters the mold cavity

    • Runner is the channel that connects the gate to the sprue or main injection point

    • Proper design of gates and runners is crucial for ensuring even distribution of material and preventing defects

    • Examples: Submarine gate, edge gate, hot runner system

  • Answered by AI
  • Q4. What is the purpose of gate & runner in molding?
  • Ans. 

    The purpose of gate & runner in molding is to control the flow of molten material into the mold cavity.

    • Gate controls the flow of molten material into the mold cavity

    • Runner distributes the molten material throughout the mold

    • They help in achieving proper filling of the mold and reducing defects like air pockets or incomplete filling

    • Different types of gates and runners are used based on the molding process and material be

  • Answered by AI
  • Q5. Cad test: NX Software version 12

Interview Preparation Tips

Topics to prepare for Hpl Electric & Power Design Engineer interview:
  • New Product Development
  • Plastic Molding
  • Plastic products
  • UG NX
Interview preparation tips for other job seekers - Prepare read plastic related all topics?
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Sep 2023. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Basic and somewhat advance related to concepts and tools
Round 2 - One-on-one 

(1 Question)

  • Q1. Managerial round - scenario based
Round 3 - HR 

(1 Question)

  • Q1. Final HR Round - normal HR questions nothing difficult
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. (1)Why transformers rating is in kva ?
  • Ans. 

    Transformers rating is in kVA because it takes into account both voltage and current.

    • kVA is a unit of apparent power, which is the combination of real power (measured in kW) and reactive power (measured in kVAR).

    • Transformers are designed to handle a certain amount of power, and kVA rating takes into account both the voltage and current that the transformer can handle.

    • For example, a transformer with a rating of 100 kVA ...

  • Answered by AI
  • Q2. What is difference between ground and earth
  • Ans. 

    Ground is a conducting body that is used as a reference point for electrical circuits, while earth is a large conducting body that acts as a sink for electrical charges.

    • Ground is a reference point for electrical circuits, while earth is a sink for electrical charges.

    • Ground is a local concept, while earth is a global concept.

    • Ground is a man-made concept, while earth is a natural concept.

    • Ground is used to prevent electri...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Bajaj Electricals Site Engineer interview:
  • Transformers
  • Transmission
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
No response

I applied via Recruitment Consulltant and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Plastic shrinkage?
  • Q2. How many types of plastic material category?
  • Ans. 

    There are seven main categories of plastic materials.

    • Thermoplastics

    • Thermosets

    • Elastomers

    • Composites

    • Biodegradable plastics

    • Engineering plastics

    • High-performance plastics

  • Answered by AI
  • Q3. Plastic rib thickness standard?
  • Ans. 

    Plastic rib thickness standard varies depending on the application and material used.

    • Plastic rib thickness is typically between 0.5mm to 5mm.

    • Thicker ribs provide more strength but may increase material usage and cost.

    • Thinner ribs are more cost-effective but may be prone to warping or breaking.

    • Consider the material properties and intended use when determining rib thickness.

    • Consult industry standards and guidelines for s

  • Answered by AI
  • Q4. How many types of defects in plastic?
  • Ans. 

    There are three main types of defects in plastic: surface defects, physical defects, and chemical defects.

    • Surface defects include scratches, sink marks, and flow marks.

    • Physical defects include bubbles, voids, and warping.

    • Chemical defects include discoloration, degradation, and contamination.

  • Answered by AI
Round 3 - Technical 

(7 Questions)

  • Q1. Diff b/w hot runner & cold runner?
  • Q2. How to prevent plastic defects?
  • Ans. 

    Preventing plastic defects involves proper material selection, design optimization, and quality control measures.

    • Selecting the right type of plastic for the application

    • Optimizing the design to minimize stress concentrations

    • Implementing proper molding techniques and parameters

    • Conducting thorough quality control inspections

    • Training staff on proper handling and storage of plastic materials

  • Answered by AI
  • Q3. No. of tonnage molding machine you are used?
  • Ans. 

    I have experience working with various tonnage molding machines, including 50-ton, 100-ton, and 200-ton machines.

    • 50-ton molding machine

    • 100-ton molding machine

    • 200-ton molding machine

  • Answered by AI
  • Q4. What is draft angle in plastic?
  • Ans. 

    Draft angle in plastic is the degree of taper or slope applied to the vertical walls of a plastic part to facilitate its ejection from the mold.

    • Draft angles are typically recommended to be between 1-3 degrees for most plastic parts

    • Draft angles help prevent the part from getting stuck in the mold during ejection

    • Examples of draft angles include adding a slight taper to the sides of a plastic cup or the walls of a plastic

  • Answered by AI
  • Q5. What is parametric modelling?
  • Ans. 

    Parametric modelling is a design approach where the model is defined by a set of parameters and rules that govern its shape and size.

    • Uses parameters to define the shape and size of the model

    • Allows for easy modification of the design by changing parameters

    • Enables creation of complex designs with interconnected features

    • Commonly used in CAD software like SolidWorks and Autodesk Inventor

  • Answered by AI
  • Q6. How to solve plastic defects issue in plastic?
  • Ans. 

    Plastic defects can be solved by identifying root causes, adjusting processing parameters, using quality materials, and implementing proper maintenance.

    • Identify root causes of defects such as improper molding conditions or poor material quality

    • Adjust processing parameters like temperature, pressure, and cooling rate to optimize production

    • Use high-quality materials to ensure consistency and durability of the final produ...

  • Answered by AI
  • Q7. Cad test on NX Software 2306 version? Plastic parts devlop in cad softwares?
  • Ans. 

    Yes, CAD tests can be conducted on NX Software 2306 version. Plastic parts can be developed in CAD software.

    • CAD tests can be performed on NX Software 2306 version to ensure compatibility and functionality.

    • CAD software allows for the design and development of plastic parts with precision and accuracy.

    • Features like 3D modeling, simulation, and analysis tools in CAD software aid in the development of plastic parts.

    • Example...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Havells Design Engineer interview:
  • Product Design
  • Injection Moulding
  • UG NX
Interview preparation tips for other job seekers - Read plastic related topics?

Skills evaluated in this interview

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Quantitative and qualitative reasoning, electrical and electronics basics

Round 3 - Technical 

(2 Questions)

  • Q1. Projects based , basic electronics concepts
  • Q2. Embedded projects related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare resume well . Go through your projects properly. Revise foundational concepts

I applied via Campus Placement and was interviewed before Apr 2019. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. What is your key achievement ? Either your study or professional
  • Q2. What you think about company ?
  • Q3. Where you see yourself in company ?
  • Q4. Why we select you?

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't panic or hesitate or stress
Opportunities never ends
Round 1 - Personal Interview 

(1 Question)

  • Q1. Are you satisfied with management view on cost cutting?
  • Ans. 

    I am satisfied with management's view on cost cutting as they have implemented effective strategies to reduce expenses without compromising quality.

    • Management has successfully implemented cost cutting measures without affecting the quality of products or services

    • They have involved employees in the cost cutting process to gather valuable insights and suggestions

    • Management regularly reviews and adjusts cost cutting strat...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - For the company, employees not a asset,it's a cost center only

I applied via Recruitment Consultant and was interviewed before Mar 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Questions were based on past work experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Just focus on basic and be confident of what you are doing in your current position.

Interview Preparation Tips

Round: Test
Experience: The test was conducted by Amcat. It was of Amcat model. Each Session had a time of 30 minutes. Questions were of medium level.There was no technical questions.
Tips: Refer Amcat Questions
Duration: 3 hours
Total Questions: 110

College Name: VIT Vellore

Wen Lighting Interview FAQs

What are the top questions asked in Wen Lighting Interior Architect interview?

Some of the top questions asked at the Wen Lighting Interior Architect interview -

  1. 1.) Educational deta...read more
  2. Field of intr...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Amazon Interview Questions
4.1
 • 5k Interviews
Flipkart Interview Questions
4.0
 • 1.3k Interviews
Swiggy Interview Questions
3.8
 • 428 Interviews
BigBasket Interview Questions
3.9
 • 359 Interviews
PolicyBazaar Interview Questions
3.6
 • 349 Interviews
Udaan Interview Questions
4.0
 • 334 Interviews
CARS24 Interview Questions
3.6
 • 331 Interviews
Meesho Interview Questions
3.7
 • 328 Interviews
View all
Business Development Executive
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

SEO Executive
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Business Development Executive
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Graphic Designer
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Key Account Manager
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Wen Lighting with

SYSKA LED Lights

2.9
Compare

Havells

4.0
Compare

Bajaj Electricals

4.0
Compare

Crompton Greaves Consumer Electricals

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview