i
Wakefit
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
I applied via Naukri.com and was interviewed in Aug 2022. There were 7 interview rounds.
5S is a workplace organization method and TPM is a maintenance strategy to maximize equipment effectiveness.
5S focuses on organizing the workplace to improve efficiency and reduce waste
TPM aims to prevent equipment breakdowns and improve overall equipment effectiveness
Both are commonly used in manufacturing and production environments
Kaizen is a Japanese term for continuous improvement while suggestion refers to proposing ideas for improvement.
Kaizen involves small, incremental changes to improve processes and increase efficiency.
Suggestion is the act of proposing ideas for improvement in a company or organization.
Both kaizen and suggestion are important for promoting a culture of continuous improvement in the workplace.
Examples of kaizen include i...
TPM stands for Total Productive Maintenance and JH steps refer to Job Hazard Analysis steps.
TPM is a maintenance strategy aimed at maximizing the productivity of equipment and minimizing downtime.
JH steps are a systematic process to identify and mitigate potential hazards in a job or task.
TPM involves proactive maintenance, autonomous maintenance, and focused improvement.
JH steps include identifying hazards, assessing ...
OEE stands for Overall Equipment Effectiveness and is a metric used to measure manufacturing productivity.
OEE takes into account three factors: availability, performance, and quality.
It is calculated by multiplying these three factors together.
OEE can help identify areas for improvement in the manufacturing process.
For example, if a machine has low availability, it may need to be serviced more frequently.
Similarly, if ...
CAPA stands for Corrective and Preventive Action, while Poka Yoke is a Japanese term for mistake-proofing.
CAPA is a process used to identify, investigate, and resolve quality issues in a product or process.
Poka Yoke is a technique used to prevent errors from occurring in a process by designing the process in a way that makes it impossible to make a mistake.
Examples of Poka Yoke include using color coding or shapes to d...
Torque value is the measure of the twisting force applied to an object.
Torque is measured in units of force multiplied by distance, such as newton-meters or pound-feet.
It is important to use the correct torque value when tightening bolts to ensure proper function and safety.
Torque values can vary depending on the material and size of the object being tightened.
Examples of torque values include 80 Nm for a car's wheel l...
Assembly processes refer to the methods used to put together individual components to create a finished product.
Assembly processes involve joining, fastening, and bonding components together
Common assembly processes include welding, soldering, and adhesive bonding
Assembly processes can be automated or done manually
The choice of assembly process depends on factors such as the materials being used and the desired strengt
WSQC, SWC, and WES are all acronyms related to different types of quality control processes.
WSQC stands for Weekly Safety and Quality Control. It is a process used in manufacturing to ensure that products meet safety and quality standards.
SWC stands for Source Water Control. It is a process used in water treatment to ensure that the water being treated meets certain quality standards.
WES stands for Work Environment Sur...
KPI stands for Key Performance Indicator. It is a measurable value that demonstrates how effectively a company is achieving its key business objectives.
KPIs are used to track progress towards specific goals and objectives
They help organizations to focus on what is important and make informed decisions
KPIs can be financial or non-financial, qualitative or quantitative
Examples of KPIs include revenue growth, customer sat
The 7 QC tools are a set of basic quality control tools used to identify and solve quality problems.
Check sheets
Control charts
Histograms
Pareto charts
Scatter diagrams
Stratification
Cause-and-effect diagrams
Line processing refers to the series of steps involved in manufacturing a product on a production line.
It involves a sequence of operations that transform raw materials into finished products
Each step in the process is carefully designed to optimize efficiency and quality
Examples include assembly lines in car manufacturing, food processing lines, and packaging lines in pharmaceuticals
Automation and robotics are increas
I applied via Naukri.com and was interviewed before Jun 2023. There were 2 interview rounds.
5S is a methodology for organizing a workplace, especially a shared workplace, to improve efficiency and effectiveness.
Sort: Separate needed tools, materials, and instructions from unneeded items.
Set in order: Arrange items so they are easy to use and label them to prevent mistakes.
Shine: Clean the workspace regularly to maintain standards and identify defects.
Standardize: Establish procedures and schedules to maintain...
I applied via Naukri.com and was interviewed before Nov 2021. There were 5 interview rounds.
Lean manufacturing is a systematic approach to identifying and eliminating waste in the production process.
Focuses on continuous improvement and waste reduction
Involves all employees in the process
Uses tools such as value stream mapping and 5S
Examples include Toyota Production System and Kaizen
Line balancing is the process of optimizing workloads across a production line to improve efficiency and reduce waste.
It involves analyzing the tasks required to complete a product and assigning them to workstations in a way that minimizes idle time and maximizes throughput.
Line balancing can help reduce bottlenecks and improve overall productivity.
It is commonly used in manufacturing and assembly line operations.
Examp...
I would analyze the situation and identify the root cause of the problem before taking any action.
Conduct a thorough analysis of the situation to identify the root cause of the problem
Communicate with the team to understand their perspective and challenges
Develop a plan of action to address the root cause and improve productivity
Implement the plan and monitor progress to ensure success
Provide regular updates to managem
I applied via Naukri.com and was interviewed before May 2021. There were 2 interview rounds.
Wakefit interview questions for designations
I applied via Naukri.com and was interviewed before Apr 2021. There were 2 interview rounds.
I applied via Recruitment Consulltant and was interviewed in Apr 2024. There was 1 interview round.
posted on 16 Feb 2022
I applied via Company Website and was interviewed in Jan 2022. There were 2 interview rounds.
I applied via Approached by Company and was interviewed in Aug 2024. There was 1 interview round.
When engine overheats, I will immediately pull over to a safe location, turn off the engine, and allow it to cool down before checking coolant levels and potential leaks.
Pull over to a safe location
Turn off the engine
Allow the engine to cool down before opening the hood
Check coolant levels and top up if necessary
Look for potential leaks or other issues
Support technicians by providing training, resources, clear communication, and recognition.
Offer regular training sessions to keep technicians updated on new technologies and procedures
Provide access to necessary resources such as tools, equipment, and manuals
Maintain open and clear communication channels to address any issues or concerns promptly
Recognize and reward technicians for their hard work and achievements to
posted on 10 Oct 2021
I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.
To improve efficiency, reduce maintenance costs, and increase production capacity.
The old plant may have outdated technology and equipment.
The old plant may require frequent repairs and maintenance.
The old plant may not be able to meet the current production demands.
The new plant may have better technology and equipment.
The new plant may require less maintenance and repair costs.
The new plant may have a higher producti...
Beer filling procedure involves several steps including cleaning, sanitizing, filling, and packaging.
The bottles or cans are first cleaned and sanitized to ensure they are free from any contaminants.
The beer is then filled into the containers using a filling machine.
The containers are then sealed and labeled before being packaged into cases or cartons.
Quality control checks are performed throughout the process to ensur...
I applied via Approached by Company and was interviewed in Sep 2022. There were 2 interview rounds.
based on 1 interview
2 Interview rounds
based on 8 reviews
Rating in categories
Warehouse Executive
95
salaries
| ₹2.9 L/yr - ₹5.3 L/yr |
Store Manager
65
salaries
| ₹3.5 L/yr - ₹7.5 L/yr |
Assistant Manager
63
salaries
| ₹4 L/yr - ₹12.2 L/yr |
Operations Executive
58
salaries
| ₹2.5 L/yr - ₹4.4 L/yr |
Senior Executive
53
salaries
| ₹3 L/yr - ₹6 L/yr |
CenturyPly
Nilkamal
Kurlon
Greenlam Industries