Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Volvo Construction Equipment Manufacturing Production Engineer Interview Questions, Process, and Tips

Updated 24 Nov 2024

Volvo Construction Equipment Manufacturing Production Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Oct 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Tell me your biodata
  • Ans. 

    I am a Manufacturing Production Engineer with a Bachelor's degree in Mechanical Engineering and 5 years of experience in optimizing production processes.

    • Bachelor's degree in Mechanical Engineering

    • 5 years of experience in optimizing production processes

    • Proficient in CAD software for designing production layouts

    • Skilled in implementing lean manufacturing principles

    • Experience in troubleshooting production issues and implem

  • Answered by AI
  • Q2. And study relevant questions
  • Q3. What is current
  • Ans. 

    Current refers to the flow of electric charge in a circuit.

    • Current is measured in Amperes (A).

    • It is the rate of flow of electric charge.

    • In a closed circuit, current flows from the positive terminal of the voltage source to the negative terminal.

    • Higher current can cause components to overheat and fail.

    • Examples: A light bulb draws a current of 0.5A, while a hairdryer may draw 10A.

  • Answered by AI
  • Q4. What is voltage
  • Ans. 

    Voltage is the difference in electric potential between two points in a circuit, measured in volts.

    • Voltage is the driving force that pushes electric current through a circuit

    • It is measured in volts (V)

    • Voltage can be either direct current (DC) or alternating current (AC)

    • Examples of voltage sources include batteries, generators, and power supplies

  • Answered by AI
  • Q5. What is Horness
  • Ans. 

    Horness is a term used in manufacturing to describe the ability of a material to resist deformation under load.

    • Horness is a measure of how much a material can resist indentation or scratching.

    • It is important in manufacturing processes to ensure the durability and quality of products.

    • Materials with high hardness include metals like steel and ceramics.

    • Hardness can be measured using various scales such as Rockwell, Brinel

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Volvo Construction Equipment Manufacturing Production Engineer interview:
  • ITI relevant questions

Interview questions from similar companies

I was interviewed in Jul 2017.

Interview Questionnaire 

2 Questions

  • Q1. Tel me about yourself
  • Ans. 

    Experienced Quality Engineer with a background in manufacturing and process improvement.

    • Bachelor's degree in Engineering

    • Certified Six Sigma Black Belt

    • Proficient in statistical analysis tools like Minitab

    • Led cross-functional teams to implement quality initiatives

    • Experience in root cause analysis and corrective action

  • Answered by AI
  • Q2. Tel me something about your education
  • Ans. 

    I have a Bachelor's degree in Mechanical Engineering from XYZ University.

    • Bachelor's degree in Mechanical Engineering

    • Graduated from XYZ University

    • Specialized in quality control and assurance

  • Answered by AI

Interview Preparation Tips

Round: HR Interview
Experience: Ans thanks for giving this apporchinuty any how in your hand ur having my CV I think u had gon through
Tips: Thank you

Round: Technical Interview
Experience: Especially I want have intrest to study so that I god less percentage but it's all my knowledge.
Tips: I am idiot but I can do it

Skills: Observations About Project

I applied via Walk-in and was interviewed in May 2019. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. I am sharing all questions in advice box..

Interview Preparation Tips

Interview preparation tips for other job seekers - Firstly asked me to tell something about myself.. He had some queried about my responsibilities for my family . After cleared those he asked about my working experience, safety related questions.
After that he started to ask me some questions from design of machine which i could not make him satisfy with my answer
Then he asked about my favourite topic during diploma engineering.. as i said him IC engine, steam engine, heat transfer, pump he started to ask questions from there like what is engine, types, d/f among them , volumetric efficiency, stroke length, compression ratio, turbocharger, pump working principle etc..
I attended those all
After that he gave some info about site environment, and asked to me that i m ok with it or not..
That's it..
Be confident and be honest are the key to crack L&T interview..
Good luck
Thank you

I was interviewed in May 2019.

Interview Questionnaire 

2 Questions

  • Q1. How many types off bricks are uses in construction..
  • Ans. 

    There are several types of bricks used in construction, including clay bricks, concrete bricks, and fire bricks.

    • Clay bricks are the most common type of brick used in construction.

    • Concrete bricks are made from cement, sand, and water and are used for their strength and durability.

    • Fire bricks are designed to withstand high temperatures and are used in fireplaces, ovens, and kilns.

    • Other types of bricks include sand-lime b...

  • Answered by AI
  • Q2. Now can control the many critical conditions on site.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(3 Questions)

  • Q1. Interview question is about my current job roles & responsibilities ?
  • Q2. Which grease we use in Engine?
  • Ans. 

    The type of grease used in an engine depends on the specific requirements of the engine and manufacturer recommendations.

    • Different types of grease may be used in different parts of the engine, such as lithium-based grease for bearings and high-temperature grease for exhaust components.

    • It is important to consult the engine manufacturer's recommendations or a qualified mechanic to determine the appropriate grease to use.

    • ...

  • Answered by AI
  • Q3. How do you do planning before starting of a project?
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Incoming inspection 

(3 Questions)

  • Q1. Jcb quality engineer incoming inspection
  • Q2. Inspection cylender bock ped plat head inspection
  • Q3. Inspection only cylinder head cylinder block cylinder bed plate

Interview Preparation Tips

Topics to prepare for JCB Quality Engineer interview:
  • Quality Engineering
Interview preparation tips for other job seekers - My name manish kumar i am a qualified engineer b-tech mechanical
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Dec 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. 2 stroke engine and 4 stroke engine
  • Q2. Type of engine
  • Ans. 

    The type of engine refers to the design and configuration of the engine used in a specific application.

    • The type of engine can be classified based on fuel type (gasoline, diesel, electric, etc.)

    • It can also be classified based on the number of cylinders (4-cylinder, 6-cylinder, etc.)

    • Other classifications include rotary engines, hybrid engines, and turbine engines.

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. Introduce your self
  • Ans. 

    I am a dedicated and experienced Production Engineer with a strong background in manufacturing processes and quality control.

    • Bachelor's degree in Mechanical Engineering

    • 5+ years of experience in production engineering

    • Proficient in CAD software and manufacturing processes

    • Led successful projects to improve production efficiency

  • Answered by AI
  • Q2. Family members
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - HR 

(1 Question)

  • Q1. Quality control
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(3 Questions)

  • Q1. Basic personal information
  • Q2. Like 1.Personal Information 2.Family Background 3.Working Experience 4.Eduacational Background 5.Technical Skills 6.Projects. Etc
  • Q3. What was your educational journey?
  • Ans. 

    I have a strong educational background in engineering and quality management.

    • Bachelor's degree in Mechanical Engineering

    • Master's degree in Quality Management

    • Courses in statistical process control and quality assurance

    • Continuous learning through workshops and seminars

  • Answered by AI
Round 3 - Technical 

(2 Questions)

  • Q1. Like, 1.Measuring Instruments 2.Core Quality tools 3.GDNT,7QCTools,Poka Yoke,Kaizen,Red Bin Analysis 4.Quality Control
  • Q2. What is Quality?
  • Ans. 

    Quality is meeting or exceeding customer expectations through consistent and reliable products or services.

    • Quality is a measure of how well a product or service meets customer needs and expectations.

    • It involves consistent and reliable performance, meeting specifications and standards.

    • Quality is achieved through effective planning, control, and improvement processes.

    • Examples of quality include products that are durable,...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for JCB Quality Engineer interview:
  • Autocad
  • 7Qctools
  • 6Sigma
Interview preparation tips for other job seekers - Prepare youself to crack a interview as per your educational background.
Interview experience
2
Poor
Difficulty level
Hard
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - Technical 

(1 Question)

  • Q1. Communication electrical circuit working
Round 2 - HR 

(1 Question)

  • Q1. What do you need this job?

Interview Preparation Tips

Interview preparation tips for other job seekers - Grow learning skill,grow up yourself and listening all knowledge about here and there
Contribute & help others!
anonymous
You can choose to be anonymous

Volvo Construction Equipment Interview FAQs

How many rounds are there in Volvo Construction Equipment Manufacturing Production Engineer interview?
Volvo Construction Equipment interview process usually has 1 rounds. The most common rounds in the Volvo Construction Equipment interview process are Technical.
What are the top questions asked in Volvo Construction Equipment Manufacturing Production Engineer interview?

Some of the top questions asked at the Volvo Construction Equipment Manufacturing Production Engineer interview -

  1. Tell me your biod...read more
  2. What is curr...read more
  3. What is volt...read more

Recently Viewed

INTERVIEWS

Sandvik Mining and Rock Technology

No Interviews

INTERVIEWS

Sandvik Mining and Rock Technology

10 top interview questions

JOBS

Comviva Technology

No Jobs

INTERVIEWS

Sandvik Mining and Rock Technology

No Interviews

INTERVIEWS

Sandvik Mining and Rock Technology

No Interviews

INTERVIEWS

Volvo Construction Equipment

No Interviews

INTERVIEWS

Sandvik Mining and Rock Technology

No Interviews

INTERVIEWS

Volvo Construction Equipment

No Interviews

INTERVIEWS

Sandvik Mining and Rock Technology

No Interviews

INTERVIEWS

Sandvik Mining and Rock Technology

No Interviews

Tell us how to improve this page.

Volvo Construction Equipment Manufacturing Production Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Caterpillar Inc Interview Questions
4.3
 • 176 Interviews
JCB Interview Questions
4.0
 • 125 Interviews
Zetwerk Interview Questions
4.1
 • 83 Interviews
TechnipFMC Interview Questions
4.0
 • 69 Interviews
Hilti Interview Questions
3.5
 • 60 Interviews
TÜV SÜD Interview Questions
3.9
 • 60 Interviews
View all
Service Engineer
78 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Sales Manager
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Service Coordinator
6 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
6 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Volvo Construction Equipment with

Caterpillar Inc

4.2
Compare

Komatsu

3.9
Compare

JCB

4.0
Compare

Tata Hitachi Construction Machinery

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview