AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Varam Constructions Electrical Design Engineer Interview Questions and Answers
Varam Constructions Electrical Design Engineer Interview Experiences
1 interview found
Salija Arjun
Selected
I applied via Approached by Company and was interviewed before Oct 2022. There were 2 interview rounds.
(4 Questions)
- Q1. Describe about myself
- Q2. Transmission voltage
- Q3. Transformer selection process
- Ans.
Transformer selection process involves considering factors like load requirements, efficiency, voltage regulation, and cost.
Determine the load requirements to calculate the transformer size needed
Consider the efficiency of the transformer to minimize energy losses
Evaluate the voltage regulation capabilities to ensure stable output voltage
Take into account the cost of the transformer and balance it with performance requ
- Q4. Generator selection process
Interview Preparation Tips
Interview questions from similar companies
Anonymous
Selected
I applied via Naukri.com and was interviewed in Jul 2024. There were 2 interview rounds.
(3 Questions)
- Q1. What is a Variable Frequency Drive (VFD) and what is its working principle?
- Ans.
A Variable Frequency Drive (VFD) is a type of motor controller that drives an electric motor by varying the frequency and voltage supplied to the motor.
VFDs are used to control the speed and torque of AC induction motors.
They convert fixed frequency and voltage input to variable frequency and voltage output.
VFDs improve energy efficiency by matching motor speed to the actual load requirements.
They are commonly used in ...
- Q2. What is the process for calculating power load?
- Ans.
The process for calculating power load involves determining the electrical demand of a system or device.
Identify all electrical devices and their power ratings in the system.
Calculate the power consumption of each device by multiplying its voltage and current.
Sum up the power consumption of all devices to get the total power load.
Consider factors like power factor and diversity to account for variations in power usage.
...
- Q3. What are MPCB and MCB?
- Ans.
MPCB stands for Motor Protection Circuit Breaker and MCB stands for Miniature Circuit Breaker.
MPCB is specifically designed to protect motors from overloads and short circuits.
MCB is a type of circuit breaker that automatically switches off electrical circuits during abnormal conditions.
Both MPCB and MCB are important components in electrical systems for protecting equipment and preventing electrical hazards.
(2 Questions)
- Q1. Can you describe your experience working at your previous company?
- Ans.
I have 5 years of experience working at my previous company as an Electrical Design Engineer.
Led the design and development of electrical systems for commercial buildings
Collaborated with cross-functional teams to ensure project deadlines were met
Performed testing and troubleshooting of electrical components
Implemented cost-saving measures by optimizing designs and materials
- Q2. What are your salary expectations?
- Ans.
My salary expectations are in line with industry standards for an experienced Electrical Design Engineer.
Research industry standards for Electrical Design Engineer salaries
Consider years of experience, education, and location when determining salary expectations
Be prepared to negotiate based on benefits and additional perks offered by the company
Interview Preparation Tips
- Presentation Skills
Interview Questionnaire
5 Questions
- Q1. What is your strength programming language?
- Ans.
My strength programming language is C++. I have extensive experience in developing software and solving complex problems using C++.
Proficient in object-oriented programming with C++
Strong knowledge of data structures and algorithms
Experience in developing efficient and scalable code
Familiarity with C++ libraries and frameworks
Ability to debug and optimize code for performance
Experience in multi-threading and parallel p...
- Q2. Differences between C and Java?
- Ans.
C is a low-level programming language while Java is a high-level object-oriented language.
C is a procedural language while Java is an object-oriented language.
C has manual memory management while Java has automatic garbage collection.
C is platform-dependent while Java is platform-independent.
C supports pointers while Java does not.
C is typically used for system-level programming while Java is used for application devel
- Q3. What is data structure?
- Ans.
Data structure is a way of organizing and storing data in a computer so that it can be accessed and manipulated efficiently.
Data structures define the way data is organized and stored in memory.
They provide efficient algorithms for accessing, inserting, and deleting data.
Examples of data structures include arrays, linked lists, stacks, queues, trees, and graphs.
- Q4. Where do u see yourself after 5 years?
- Ans.
In 5 years, I see myself as a senior electrical engineer leading a team on innovative projects and contributing to the growth of the company.
Leading a team on innovative projects
Contributing to the growth of the company
Possibly pursuing further education or certifications
Mentoring junior engineers
Attending industry conferences and staying updated on latest technologies
- Q5. If you got selected in CAT examination, what would u prefer job or further studies?
- Ans.
I would prefer a job to gain practical experience and apply my knowledge in a real-world setting.
Prefer job for practical experience
Apply knowledge in real-world setting
Gain industry exposure
Financial independence
Opportunity for career growth
Interview Preparation Tips
Experience: On that day huge strength of students was attended, including our university. The criteria are 60% in 10th,12th, and current degree without standing arrears. However I qualified for this round. It was simple.
Tips: 1. Command over the vocabulary.
2. Reading of newspaper and novels regularly.
Duration: 1 hour
Total Questions: 50
Round: Group Discussion
Experience: There were 7 groups which consisted 10 members each. Each person had given the time seperately to talk about the topic and later HR was asking a general question.
Tips: 1. Fluency should be good.
2. Clarity in voice.
3. Knowledge about the topic
Duration: 11 hours 20 minutes
Round: Technical + HR Interview
Experience: There was panel of 4 people who were asking questions. They went through all my resume and asked the questions.
Tips: 1.Confidence
2. Knowledge about languages
3. Proper resume
3. Inflencial technical skills
College Name: Ajay Kumar Garg Engineering College, Ghaziabad
Skills evaluated in this interview
I was interviewed in Dec 2016.
Interview Questionnaire
3 Questions
- Q1. Reason for low scores.
- Ans.
Low scores due to lack of time management and exam anxiety.
Struggled to allocate enough time for each question
Difficulty managing time during the exam
Anxiety affecting performance under pressure
- Q2. Questions regarding my final year project.
- Q3. Thermodynamics.
Interview Preparation Tips
I applied via Walk-in and was interviewed in Nov 2018. There were 6 interview rounds.
Interview Questionnaire
3 Questions
- Q1. Any requirement for electrical engineer....
- Q2. I am motivate doing like this job
- Q3. I want a good job
Interview Preparation Tips
I applied via Naukri.com and was interviewed in May 2018. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. 1.Tell me about your self. 2.Tell me about your job roles & responsibilities. 3.About FMEA 4.About MSA 5.About PPAP element according to IATF (19-Elements) 6.About PPAP Levels (5-Level) 7.Difference b/w Ve...
- Ans.
I am a Product Design Engineer with experience in FMEA, MSA, PPAP, ISO standards, and Six Sigma concepts.
Job roles include designing products, conducting FMEA analysis, implementing MSA techniques, preparing PPAP documentation, ensuring compliance with ISO standards, and applying Six Sigma principles.
FMEA (Failure Mode and Effects Analysis) is a systematic method for identifying and preventing potential failures in a p...
- Q2. 1.Tell me about your self 2.Basic questions realated to package.
Interview Preparation Tips
Skills: Communication, Problem Solving, Analytical Skills, Leadership, Decision Making Skills
Duration: <1 week
I applied via Recruitment Consulltant and was interviewed before Feb 2021. There were 2 interview rounds.
(8 Questions)
- Q1. What are your salary expectations?
- Q2. What is your family background?
- Q3. Share details of your previous job.
- Q4. Why should we hire you?
- Q5. Why are you looking for a change?
- Q6. Where do you see yourself in 5 years?
- Q7. What are your strengths and weaknesses?
- Q8. Tell me about yourself.
Interview Preparation Tips
SAGAR SHAH
Interview Preparation Tips
Experience: CRITERIA:6.5+ CGPANO BACKLOGS
Tips: TRY TO WORK HARD IN THE EARLIER SEMESTERS TO BE ELIGIBLE FOR MOST OF THE COMPANIES.
Round: Test
Experience: 30 TECHNICAL QUESTIONS, PURELY BRANCH SPECIFIC, EASY AND BASIC CONCEPTS WERE ASKED.30 APTITUDE AND ENGLISH QUESTIONS, VERY EASY
Tips: PREPARE TECHNICAL PART WELLPRACTICE APTITUDE AND ENGLISH FROM www.indiabix.comVERY HELPFUL WEBSITE
Duration: 60 minutes
Total Questions: 60
Round: HR Interview
Experience: GENERAL QUESTIONS WERE ASKED:ABOUT MYSELFFAMILY BACKGROUNDSCHOOLING AND ACADEMIC ACHIEVEMENTSABOUT JOINING TCE
Tips: DON'T MANIPULATE THE TRUTH.ANSWER CLEARLY AND CONFIDENTLY.
Round: Technical Interview
Experience: TECHNICAL QUESTIONS RELATED TO ELECTIVE SUBJECTS WERE ASKED.ALSO DESIGN STEPS OF VARIOUS STRUCTURAL ELEMENTS WERE ASKED.
Tips: BE PREPARED. SAY "DON'T KNOW THE ANSWER" INSTEAD OF SPEAKING NONSENSE. ANSWER ONLY WHAT IS ASKED. EXTRA INFO GIVEN BY YOU CAN GET YOU IN UNWANTED TROUBLE!! :P
General Tips: BEST OF LUCK.
Skill Tips: MAIN FOCUS ON THE WAY YOU COMMUNICATE WITH THE INTERVIEWERS IN ENGLISH!!
Skills: COMMUNICATION SKILLS
College Name: NIT SURAT
Motivation: GOOD REPUTATION. IT WAS EXACTLY MATCHING TO THE JOB PROFILE I ASPIRED FOR.TATA GROUP IS A BIG BRAND IN INDIA AND CAN LEAD TO MANY FUTURE BENEFITS IF YOU SERVE THEM FOR CONSIDERABLE AMOUNT OF TIME.
Funny Moments: THEY ASKED ME: "ANY SUGGESTION FOR IMPROVING OUR SELECTION PROCEDURE?"I ANSWERED: "YOU SHOULD CHANGE IT. TEST SHOULD BE ONLINE RATHER THAN BEING OFFLINE i.e. PEN AND PAPER."THEY WERE IMPRESSED AND APPRECIATED IT. :P
Ganesh Chandurkar
Interview Questionnaire
1 Question
- Q1. About Transformer
Interview Preparation Tips
Duration: 10 hours 5 minutes
Total Questions: 10
I applied via Company Website and was interviewed in Jul 2021. There were 6 interview rounds.
Group disscassion for planing prodection according
Interview Preparation Tips
Varam Constructions Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Electrical Engineer Interview Questions
- Electrical Technician Interview Questions
- Electrical Designer Interview Questions
- Electrical Supervisor Interview Questions
- Electrical Maintenance Engineer Interview Questions
- Electrical GET Interview Questions
- Diploma Electrical Engineer Interview Questions
- Senior Electrical Engineer Interview Questions
- Show more
Varam Constructions Electrical Design Engineer Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
TCS
Accenture
Wipro
Cognizant
- Home >
- Interviews >
- Varam Constructions Interview Questions >
- Varam Constructions Electrical Design Engineer Interview Questions
