Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Ultramarine & Pigments Team. If you also belong to the team, you can get access from here

Ultramarine & Pigments Verified Tick

Compare button icon Compare button icon Compare
3.7

based on 65 Reviews

Filter interviews by

Clear (1)

Ultramarine & Pigments Senior Instrument Engineer Interview Questions, Process, and Tips

Updated 7 Aug 2021

Ultramarine & Pigments Senior Instrument Engineer Interview Experiences

1 interview found

I applied via Naukri.com and was interviewed before Aug 2020. There was 1 interview round.

Interview Questionnaire 

5 Questions

  • Q1. Introduction
  • Q2. How can be new IOs added in existing PLC/DCS system??
  • Ans. 

    New IOs can be added in existing PLC/DCS system by following these steps:

    • Identify the type and number of IOs required

    • Check the compatibility of the new IOs with the existing system

    • Configure the IOs in the PLC/DCS software

    • Install the new IO modules and connect them to the system

    • Test the new IOs to ensure proper functioning

  • Answered by AI
  • Q3. Pressure transmitter Hook up diagram!!!
  • Ans. 

    A pressure transmitter hook up diagram shows how to connect the transmitter to the process piping and control system.

    • The transmitter should be installed at the point where pressure is to be measured.

    • The process piping should be connected to the high and low pressure ports of the transmitter.

    • The transmitter should be connected to the control system using appropriate wiring.

    • Proper grounding and shielding techniques shoul...

  • Answered by AI
  • Q4. Selection of field instruments
  • Ans. 

    Field instruments are selected based on process requirements, accuracy, reliability, and cost.

    • Understand the process requirements and select instruments accordingly

    • Consider accuracy and reliability of the instruments

    • Evaluate the cost of the instruments and select the most cost-effective option

    • Ensure compatibility with the control system

    • Consider environmental factors such as temperature and pressure

    • Examples of field ins...

  • Answered by AI
  • Q5. Working Principle of coriolis mass flowmeter and electromagnetic flowmeter
  • Ans. 

    Coriolis mass flowmeter measures mass flow rate by detecting the Coriolis force. Electromagnetic flowmeter measures volumetric flow rate by using Faraday's law of electromagnetic induction.

    • Coriolis mass flowmeter measures the mass flow rate directly

    • It works on the principle of Coriolis force

    • The fluid is forced to oscillate by a vibrating tube and the Coriolis force is measured

    • Electromagnetic flowmeter measures the volu...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I prepared technical as well as mindset for unpredictable questions

Rate your
company

🤫 100% anonymous

How was your last interview experience?

Share interview

Interview questions from similar companies

I applied via Walk-in

Round 1 - Aptitude Test 
Round 2 - Aptitude Test 
Round 3 - Technical 

(1 Question)

  • Q1. Electromagnetic flowmeter working principle
  • Ans. 

    Electromagnetic flowmeter measures fluid flow by inducing a magnetic field and measuring the voltage generated by the fluid's movement.

    • Uses Faraday's law of electromagnetic induction

    • Fluid must be conductive

    • No moving parts

    • Accurate and reliable

    • Commonly used in water treatment, chemical, and food industries

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Simply waste...no comments.....All you need is patience in this firm
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(3 Questions)

  • Q1. MASS FLOWMETER CALIBRATION
  • Q2. DP TYPE LT working and configuration
  • Ans. 

    DP type LT stands for Differential Pressure type Level Transmitter used for measuring level in tanks or vessels.

    • DP type LT measures level by detecting the pressure difference between two points in a vessel.

    • It consists of two pressure sensors connected to the top and bottom of the tank.

    • The configuration involves setting the zero and span points to calibrate the transmitter.

    • Commonly used in industries like oil & gas, che...

  • Answered by AI
  • Q3. Installation of DPT IN STEAM LINE
  • Ans. 

    Installation of DPT in steam line involves proper mounting, calibration, and protection against high temperatures.

    • Ensure proper mounting of the differential pressure transmitter (DPT) in the steam line to accurately measure pressure difference.

    • Calibrate the DPT regularly to maintain accuracy in steam pressure readings.

    • Use heat-resistant materials and insulation to protect the DPT from high temperatures in the steam lin...

  • Answered by AI
Round 2 - One-on-one 

(2 Questions)

  • Q1. Family background
  • Q2. Salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Company is very good. Working environments are also very good. We Increase our knowledge and skill. Staff was very good and sporting.

Skills evaluated in this interview

Instrumentation Technician Interview Questions & Answers

Ineos Styrolution user image Chauhan Hardiksinh Harshd Sinh

posted on 25 Aug 2023

Interview experience
5
Excellent
Difficulty level
-
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Aug 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(4 Questions)

  • Q1. Instrument mechanical
  • Q2. Apprenticeship a
  • Q3. Iti I’m instrument mechanical
  • Q4. I’m so happy for
Round 3 - HR 

(2 Questions)

  • Q1. Behaviour safety
  • Q2. Future a Company growth

Interview Preparation Tips

Interview preparation tips for other job seekers - Mr Hardiksinh Chauhan
Iti (instrument mechanism)

I applied via Walk-in

Round 1 - Aptitude Test 
Round 2 - Aptitude Test 
Round 3 - Technical 

(1 Question)

  • Q1. Electromagnetic flowmeter working principle
  • Ans. 

    Electromagnetic flowmeter measures fluid flow by inducing a magnetic field and measuring the voltage generated by the fluid's movement.

    • Uses Faraday's law of electromagnetic induction

    • Fluid must be conductive

    • No moving parts

    • Accurate and reliable

    • Commonly used in water treatment, chemical, and food industries

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Simply waste...no comments.....All you need is patience in this firm
Contribute & help others!
anonymous
You can choose to be anonymous

Ultramarine & Pigments Interview FAQs

What are the top questions asked in Ultramarine & Pigments Senior Instrument Engineer interview?

Some of the top questions asked at the Ultramarine & Pigments Senior Instrument Engineer interview -

  1. How can be new IOs added in existing PLC/DCS system...read more
  2. Working Principle of coriolis mass flowmeter and electromagnetic flowme...read more
  3. Pressure transmitter Hook up diagram!...read more

Recently Viewed

SALARIES

Abhinandan Urban Co-Op Bank

Tell us how to improve this page.

Anonymously discuss salaries, work culture, and many more

Get Ambitionbox App

Interview Questions from Similar Companies

Asian Paints Interview Questions
4.0
 • 627 Interviews
Berger Paints Interview Questions
3.7
 • 253 Interviews
Atul Interview Questions
3.9
 • 78 Interviews
AkzoNobel Interview Questions
4.2
 • 62 Interviews
BASF Interview Questions
4.4
 • 30 Interviews
View all

Ultramarine & Pigments Senior Instrument Engineer Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

4.0

Skill development

3.0

Work-life balance

3.0

Salary

4.0

Job security

3.0

Company culture

3.0

Promotions

3.0

Work satisfaction

Explore 1 Review and Rating
Production Supervisor
25 salaries
unlock blur

₹1 L/yr - ₹4.5 L/yr

Assistant Engineer
24 salaries
unlock blur

₹3.2 L/yr - ₹5.8 L/yr

Junior Engineer
23 salaries
unlock blur

₹1.2 L/yr - ₹4.1 L/yr

Assistant Manager
17 salaries
unlock blur

₹7 L/yr - ₹11 L/yr

Senior Engineer
15 salaries
unlock blur

₹4.7 L/yr - ₹9.2 L/yr

Explore more salaries
Compare Ultramarine & Pigments with

BASF

4.4
Compare

Pidilite Industries

4.3
Compare

Asian Paints

4.0
Compare

AkzoNobel

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent