Upload Button Icon Add office photos

Filter interviews by

Bodal Chemicals Instrument Engineer Interview Questions and Answers

Updated 21 Jun 2024

Bodal Chemicals Instrument Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(3 Questions)

  • Q1. MASS FLOWMETER CALIBRATION
  • Q2. DP TYPE LT working and configuration
  • Ans. 

    DP type LT stands for Differential Pressure type Level Transmitter used for measuring level in tanks or vessels.

    • DP type LT measures level by detecting the pressure difference between two points in a vessel.

    • It consists of two pressure sensors connected to the top and bottom of the tank.

    • The configuration involves setting the zero and span points to calibrate the transmitter.

    • Commonly used in industries like oil & gas, che...

  • Answered by AI
  • Q3. Installation of DPT IN STEAM LINE
  • Ans. 

    Installation of DPT in steam line involves proper mounting, calibration, and protection against high temperatures.

    • Ensure proper mounting of the differential pressure transmitter (DPT) in the steam line to accurately measure pressure difference.

    • Calibrate the DPT regularly to maintain accuracy in steam pressure readings.

    • Use heat-resistant materials and insulation to protect the DPT from high temperatures in the steam lin...

  • Answered by AI
Round 2 - One-on-one 

(2 Questions)

  • Q1. Family background
  • Q2. Salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Company is very good. Working environments are also very good. We Increase our knowledge and skill. Staff was very good and sporting.

Skills evaluated in this interview

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Feb 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Technical standards, hazards zone, field Instrumentation, DCS.
Round 3 - Case Study 

Challanges in job, safety , risk and hazards

Round 4 - HR 

(1 Question)

  • Q1. Introduction, communication skills, presentation, salary discussion.

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare all I mentioned above, if you want to join aarti.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Fundamentals of instrumentation with practical knowledge
  • Q2. All flow meter accuracy
  • Ans. 

    Flow meter accuracy depends on various factors such as type of flow meter, fluid properties, and installation conditions.

    • The type of flow meter used affects its accuracy. For example, a differential pressure flow meter may have an accuracy of +/- 0.5% of the flow rate, while a magnetic flow meter may have an accuracy of +/- 0.25%.

    • Fluid properties such as viscosity, density, and conductivity can also affect flow meter a...

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. DCS, Plc, Transmitter, Related
Round 3 - HR 

(1 Question)

  • Q1. Experience, Expected salary

Interview Preparation Tips

Interview preparation tips for other job seekers - Good for starting candidate, Good for learning, supportive team
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Sep 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Basic instrumentation working principles. Basic and detail engineering
Round 3 - HR 

(1 Question)

  • Q1. Availability for site work
  • Ans. 

    I am available for site work and can adjust my schedule as needed.

    • I am flexible with my schedule and can work evenings and weekends if required

    • I have reliable transportation to travel to different sites

    • I am willing to travel for work if necessary

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Feb 2023.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Heat exchanger, pump, Safety valve design P&ID, PFD
  • Q2. Past experience of your company

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare in deep all these topic. Majorly they will ask ypon these.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Apr 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Tells me about your self
  • Q2. Need to update abou education and working experience
  • Q3. Did you have working experience in sap
  • Q4. If you have experienced in sap the need explain in details

Interview Preparation Tips

Topics to prepare for Aarti Industries Associate interview:
  • SAP
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Jul 2023.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Family discussion
Round 3 - One-on-one 

(2 Questions)

  • Q1. Personal introduction
  • Q2. Your past job experience only

Interview Preparation Tips

Interview preparation tips for other job seekers - Please if don't have any jobs or you are contractual working employee, then it's great to join but switch job after 2 years or before

I applied via Recruitment Consultant and was interviewed in Jun 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Questions based on your past experience and job profile.

Interview Preparation Tips

Interview preparation tips for other job seekers - Confidence plays a vital role in any interview. Give answer to the point. If you don't know something be polite.

Interview Questionnaire 

1 Question

  • Q1. Site engineer

Interview Preparation Tips

Interview preparation tips for other job seekers - Telephone interview

Bodal Chemicals Interview FAQs

How many rounds are there in Bodal Chemicals Instrument Engineer interview?
Bodal Chemicals interview process usually has 2 rounds. The most common rounds in the Bodal Chemicals interview process are Technical and One-on-one Round.
What are the top questions asked in Bodal Chemicals Instrument Engineer interview?

Some of the top questions asked at the Bodal Chemicals Instrument Engineer interview -

  1. DP TYPE LT working and configurat...read more
  2. Installation of DPT IN STEAM L...read more
  3. MASS FLOWMETER CALIBRAT...read more

Tell us how to improve this page.

Bodal Chemicals Instrument Engineer Interview Process

based on 2 interviews

Interview experience

4.5
  
Good
View more

Interview Questions from Similar Companies

Aarti Industries Interview Questions
4.1
 • 282 Interviews
PI Industries Interview Questions
4.0
 • 105 Interviews
Atul Interview Questions
3.9
 • 83 Interviews
Hikal Interview Questions
3.8
 • 56 Interviews
View all
Bodal Chemicals Instrument Engineer Salary
based on 21 salaries
₹2.4 L/yr - ₹5.2 L/yr
45% less than the average Instrument Engineer Salary in India
View more details

Bodal Chemicals Instrument Engineer Reviews and Ratings

based on 3 reviews

2.5/5

Rating in categories

2.5

Skill development

2.5

Work-life balance

2.0

Salary

2.9

Job security

2.0

Company culture

1.5

Promotions

2.5

Work satisfaction

Explore 3 Reviews and Ratings
Electrical Engineer
34 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Plant Operator
29 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

QC Chemist
22 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Instrument Engineer
21 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Instrumentation Technician
21 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Bodal Chemicals with

Atul

3.9
Compare

Vinati Organics

4.0
Compare

Navin Fluorine International

3.9
Compare

Sudarshan Chemical Industries

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview