Upload Button Icon Add office photos

TÜV NORD

Compare button icon Compare button icon Compare

Filter interviews by

TÜV NORD Quality Inspector Interview Questions and Answers

Updated 21 Jan 2023

TÜV NORD Quality Inspector Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Dec 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. ALL QUESTIONS RELATED TO ASME AND PED, NDT, MATERIAL, WELDING
  • Q2. They ask you about lot about raw material, WPS PQR, INSPECTION EQUIPMENT REGARDING QUESTIONS

Interview Preparation Tips

Topics to prepare for TÜV NORD Quality Inspector interview:
  • ASME
  • NDT Inspection
  • Raw Material
  • welding technology
  • EQUIPMENT INSPECTION
  • Heat Treatment
Interview preparation tips for other job seekers - If we want to travel lot more than usual you can join this job as Inspection enginer

Interview questions from similar companies

I applied via Company Website

Round 1 - HR 

(1 Question)

  • Q1. Resume short listed and ask questions in this regard. And also ask him to overall experience and which Feild required and put op questions.

Interview Preparation Tips

Interview preparation tips for other job seekers - Take interview preparation. Self study and prepare of notes. Taking hard work during inspection and project period.

I applied via Referral and was interviewed in Apr 2022. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. About plate mill

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company & good environment
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Releted for new build site in telecom
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(3 Questions)

  • Q1. What is your experience with cement plant execution?
  • Ans. 

    I have 5 years of experience in cement plant execution, including overseeing construction, quality control, and project management.

    • Managed construction projects from start to finish

    • Implemented quality control measures to ensure compliance with industry standards

    • Coordinated with various teams to ensure project deadlines were met

    • Utilized project management tools to track progress and identify areas for improvement

  • Answered by AI
  • Q2. Silo experience
  • Q3. Quality in civil
  • Ans. 

    Quality in civil engineering refers to ensuring that construction projects meet specified standards and requirements.

    • Quality in civil engineering involves ensuring that materials used meet specifications and standards.

    • It also includes ensuring that construction processes adhere to industry regulations and codes.

    • Quality control measures such as inspections and testing are used to verify compliance with quality standards...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Feb 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Are You Interested for work in Tata Projects?
  • Ans. 

    Yes, I am interested in working at Tata Projects.

    • Tata Projects is a reputable company known for its quality projects.

    • Working at Tata Projects would provide me with valuable experience in the field of quality engineering.

    • I am impressed by Tata Projects' commitment to excellence and their focus on delivering high-quality projects.

    • I believe that working at Tata Projects would offer me opportunities for professional growth...

  • Answered by AI
  • Q2. Why are you in interested in Tata Projects?
  • Ans. 

    I am interested in Tata Projects because of their reputation for quality and innovation in the engineering industry.

    • Tata Projects has a strong reputation for delivering high-quality projects.

    • They are known for their innovative approach to engineering and construction.

    • The company has a diverse portfolio of projects across various sectors.

    • Tata Projects offers excellent career growth opportunities and a supportive work en...

  • Answered by AI
Round 3 - Technical 

(10 Questions)

  • Q1. What is the Physical & Chemical test of Steel Reinforcement?
  • Ans. 

    Physical & Chemical tests of Steel Reinforcement include tensile strength, elongation, chemical composition, and corrosion resistance.

    • Tensile strength test measures the maximum stress a material can withstand before breaking

    • Elongation test measures the ability of the material to stretch before breaking

    • Chemical composition test determines the percentage of elements present in the steel reinforcement

    • Corrosion resistance ...

  • Answered by AI
  • Q2. What are Cement & concrete test?
  • Ans. 

    Cement and concrete tests are used to ensure the quality and strength of the materials used in construction.

    • Tests for cement include fineness, setting time, compressive strength, and soundness.

    • Tests for concrete include slump, compressive strength, air content, and density.

    • These tests are important to ensure that the materials meet the required standards and specifications for construction projects.

    • Results from these t...

  • Answered by AI
  • Q3. What are Pre & post pour checks for concrete?
  • Ans. 

    Pre & post pour checks are essential to ensure the quality of concrete.

    • Pre-pour checks include inspection of formwork, reinforcement, and concrete mix design.

    • Post-pour checks include slump test, air content test, and temperature monitoring.

    • Other checks include curing, finishing, and testing for compressive strength.

    • These checks help ensure that the concrete is of the desired quality and meets the project specifications

  • Answered by AI
  • Q4. What are Aggregate test and results criteria?
  • Ans. 

    Aggregate test is a method to determine the strength of coarse aggregates. Results criteria depend on the type of aggregate.

    • Aggregate tests include crushing value test, impact value test, and abrasion value test.

    • The results criteria for each test vary depending on the type of aggregate being tested.

    • For example, the crushing value test result criteria for basalt aggregate is 25%, while for limestone aggregate it is 30%.

    • ...

  • Answered by AI
  • Q5. What is passing criteria of concrete cubes?
  • Ans. 

    The passing criteria of concrete cubes is based on the compressive strength achieved by the cubes after a certain period of time.

    • The cubes are usually tested after 7 and 28 days of curing

    • The passing criteria varies depending on the grade of concrete used

    • For example, for M20 grade concrete, the passing criteria is 20 N/mm² after 28 days of curing

    • The cubes are tested using a compression testing machine

  • Answered by AI
  • Q6. What is concrete cover & it's requirement?
  • Ans. 

    Concrete cover is the thickness of concrete between the surface of embedded reinforcement and the outer surface of the concrete.

    • It is required to protect the reinforcement from corrosion and fire damage.

    • The thickness of the concrete cover depends on the type of structure and the environmental conditions.

    • The minimum concrete cover is specified in the design codes and standards.

    • For example, in reinforced concrete columns...

  • Answered by AI
  • Q7. Previous projects related responsibilities
  • Q8. What is NCR & it's closing process?
  • Ans. 

    NCR stands for Non-Conformance Report. It is a document used to record and track quality issues in a product or process.

    • NCR is used to document any deviation from the required specifications or standards.

    • It includes details such as the nature of the non-conformance, its location, and the corrective action taken.

    • The closing process involves verifying that the corrective action has been effective and the non-conformance ...

  • Answered by AI
  • Q9. All about what you have mentioned in your CV.
  • Q10. About Tests and that's IS codes.

Interview Preparation Tips

Interview preparation tips for other job seekers - 1. First of all You should mention in your CV only what you know well.
2. You should not mention any Extra information or activites in your CV.
3. You should answer properly about the question.
4. If you do'nt know answer about any question, you can say humbly Sir, No idea about this.
5. You should not answer any question bypassing the topic of that question.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Oct 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Some technical questions

Round 3 - Technical 

(1 Question)

  • Q1. Quality test question
Round 4 - HR 

(1 Question)

  • Q1. Salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Yes good job

I was interviewed in Jul 2021.

Interview Questionnaire 

5 Questions

  • Q1. About notice period.
  • Q2. About experience
  • Q3. About technical experience
  • Q4. 5 technical exams
  • Q5. And many more….

Interview Preparation Tips

Interview preparation tips for other job seekers - Be calm. Make your Minus into Plus. That’s the confidence.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I was interviewed in Aug 2024.

Round 1 - Technical 

(2 Questions)

  • Q1. What is Least count of lathe machine?
  • Ans. 

    The least count of a lathe machine is the smallest measurement that can be read or measured by the machine.

    • The least count of a lathe machine is typically determined by the number of divisions on the main scale and the number of divisions on the Vernier scale.

    • For example, if the main scale has 1 mm divisions and the Vernier scale has 10 divisions that cover 9 mm, the least count would be 0.1 mm.

    • The least count is impor...

  • Answered by AI
  • Q2. Which tool was used to boring machine?
  • Ans. 

    The tool used for boring machine is called a boring bar.

    • Boring bar is a cutting tool used in machining to create holes with precise dimensions and smooth finishes.

    • It is commonly used in metalworking and woodworking industries.

    • Examples of boring bars include solid carbide bars, indexable insert bars, and adjustable bars.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Small or big don't give up job for any situations

Quality Inspector Interview Questions & Answers

Bureau Veritas user image Umar bin abdul majeeth

posted on 11 May 2024

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed before May 2023. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. Introducing yourself

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep updated

TÜV NORD Interview FAQs

How many rounds are there in TÜV NORD Quality Inspector interview?
TÜV NORD interview process usually has 2 rounds. The most common rounds in the TÜV NORD interview process are Resume Shortlist and Technical.
What are the top questions asked in TÜV NORD Quality Inspector interview?

Some of the top questions asked at the TÜV NORD Quality Inspector interview -

  1. They ask you about lot about raw material, WPS PQR, INSPECTION EQUIPMENT REGARD...read more
  2. ALL QUESTIONS RELATED TO ASME AND PED, NDT, MATERIAL, WELD...read more

Tell us how to improve this page.

TÜV NORD Quality Inspector Interview Process

based on 2 interviews

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Tata Projects Interview Questions
4.2
 • 426 Interviews
Bureau Veritas Interview Questions
3.9
 • 113 Interviews
SGS Interview Questions
3.9
 • 92 Interviews
CMS Infosystems Interview Questions
3.6
 • 54 Interviews
Intertek Interview Questions
3.8
 • 51 Interviews
Cashify Interview Questions
3.8
 • 40 Interviews
Titan Eye Plus Interview Questions
4.3
 • 30 Interviews
View all
TÜV NORD Quality Inspector Salary
based on 24 salaries
₹1.8 L/yr - ₹7.5 L/yr
51% more than the average Quality Inspector Salary in India
View more details

TÜV NORD Quality Inspector Reviews and Ratings

based on 7 reviews

4.1/5

Rating in categories

4.2

Skill development

3.8

Work-life balance

3.6

Salary

4.0

Job security

3.8

Company culture

3.8

Promotions

4.0

Work satisfaction

Explore 7 Reviews and Ratings
Inspection Engineer
548 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
212 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Inspection Engineer
132 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
73 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Quality Engineer
70 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare TÜV NORD with

Bureau Veritas

3.9
Compare

DNV GL

4.3
Compare

SGS

3.9
Compare

Intertek

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview