Upload Button Icon Add office photos

Filter interviews by

TOP STEEL NIGERIA Mechanical Engineer Interview Questions and Answers

Updated 14 Apr 2024

TOP STEEL NIGERIA Mechanical Engineer Interview Experiences

3 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Referral and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Difference btwn planned shutdown and predictive shutdown
  • Ans. 

    Planned shutdown is scheduled maintenance while predictive shutdown is based on data analysis to predict when maintenance is needed.

    • Planned shutdown is pre-scheduled and typically occurs at regular intervals to prevent unexpected breakdowns.

    • Predictive shutdown uses data analysis and monitoring to predict when maintenance is needed based on the condition of the equipment.

    • Planned shutdown is proactive maintenance while p...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Hv confidence n remember the basics

Skills evaluated in this interview

I applied via Company Website and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Gear ratio calculation...PCD calculation, Few questions About Hydraulic and pneumatic cylinder and Hydraulic Power pack

Interview Preparation Tips

Interview preparation tips for other job seekers - Be technically fit and confident

Mechanical Engineer Interview Questions Asked at Other Companies

Q1. What we need to do if pressure valve fail in boiler
Q2. What are the basic parts of an aeroplane and there working functi ... read more
asked in Tata Steel
Q3. Percentage of carbon presence in cast iron
Q4. How we cool a pipe in a chamber without using coolent
Q5. Why petrol engines comparison ratio low when compared to a diesel ... read more

I applied via Company Website and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Gear ratio calculation...PCD calculation, Few questions About Hydraulic and pneumatic cylinder and Hydraulic Power pack

Interview Preparation Tips

Interview preparation tips for other job seekers - Be technically fit and confident

Interview questions from similar companies

I applied via Referral and was interviewed before May 2021. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Genaral questions about pas work experience
Round 2 - One-on-one 

(1 Question)

  • Q1. Questions related to work were asked and personal family details were also asked
Round 3 - HR 

(1 Question)

  • Q1. About compensation and time of joining only

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared about your past work experience related process & technical questions

Interview Questionnaire 

3 Questions

  • Q1. What is differential?
  • Ans. 

    Differential is a mechanical device that allows the wheels of a vehicle to rotate at different speeds.

    • Differential is commonly found in vehicles with multiple wheels, such as cars and trucks.

    • It is located in the center of the axle and connects the drive shaft to the wheels.

    • The main purpose of a differential is to allow the wheels to rotate at different speeds while still receiving power from the engine.

    • This is importan...

  • Answered by AI
  • Q2. What is EGR system
  • Ans. 

    EGR system stands for Exhaust Gas Recirculation system. It is used in internal combustion engines to reduce nitrogen oxide emissions.

    • EGR system recirculates a portion of exhaust gases back into the engine's intake manifold.

    • This reduces the combustion temperature and lowers the production of nitrogen oxides.

    • The recirculated exhaust gases also help in reducing engine knocking and improving fuel efficiency.

    • EGR systems can...

  • Answered by AI
  • Q3. Which types gear use in I-shift automatic gearbox
  • Ans. 

    The I-shift automatic gearbox uses helical gears and spur gears.

    • I-shift automatic gearbox uses helical gears for the main transmission and spur gears for the auxiliary section

    • Helical gears provide smoother and quieter operation compared to spur gears

    • Spur gears are used for the auxiliary section as they are more efficient for high torque applications

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for every question and give answers of every question to interviewer related to question
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Basic aptitude test with time limit

Round 3 - One-on-one 

(2 Questions)

  • Q1. Basically questions about the trade about you are working or knowledge of job and experience , the job in the field of interest is very important
  • Q2. Ask about educational qualification and any achievements

Interview Preparation Tips

Interview preparation tips for other job seekers - Stay focused and keep your goals clear to get the final round
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I appeared for an interview in Mar 2023.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Not that much to share they just ask the day to day challenge handling and process of purchasing a material...
  • Q2. How many mails do you handle
  • Ans. 

    I handle approximately 50-100 emails per day in my current role as a Senior Engineer.

    • I prioritize emails based on urgency and importance

    • I respond to emails promptly to ensure efficient communication

    • I organize emails into folders for easy access and reference

  • Answered by AI
Round 3 - One-on-one 

(1 Question)

  • Q1. Same as it is before...
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Dec 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. All bout current job description.
  • Q2. Details about structural design and its analysis.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Aug 2023. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. What is your current ctc
  • Ans. 

    My current CTC is confidential and I would prefer to discuss compensation during the negotiation phase.

    • My current CTC is subject to confidentiality agreements.

    • I am open to discussing compensation during the negotiation phase.

    • I believe my skills and experience align with the Senior Engineer role.

  • Answered by AI
  • Q2. Reason for job change
  • Ans. 

    Seeking new challenges and opportunities for growth

    • Desire to work on more complex projects

    • Looking for a company with better career advancement opportunities

    • Seeking a more collaborative team environment

    • Want to expand skill set in new technologies

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Best company to choose for career growth
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Apr 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Basics about your self
Round 3 - Technical 

(1 Question)

  • Q1. Regarding your experience and related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Be your self and confident

TOP STEEL NIGERIA Interview FAQs

How many rounds are there in TOP STEEL NIGERIA Mechanical Engineer interview?
TOP STEEL NIGERIA interview process usually has 1 rounds. The most common rounds in the TOP STEEL NIGERIA interview process are Technical.
What are the top questions asked in TOP STEEL NIGERIA Mechanical Engineer interview?

Some of the top questions asked at the TOP STEEL NIGERIA Mechanical Engineer interview -

  1. Difference btwn planned shutdown and predictive shutd...read more
  2. Gear ratio calculation...PCD calculation, Few questions About Hydraulic and pne...read more

Tell us how to improve this page.

TOP STEEL NIGERIA Mechanical Engineer Interview Process

based on 1 interview

1 Interview rounds

  • Technical Round
View more
Executive Accountant
4 salaries
unlock blur

₹8.4 L/yr - ₹9.6 L/yr

Commercial Manager
3 salaries
unlock blur

₹13.8 L/yr - ₹18.2 L/yr

Store Manager
3 salaries
unlock blur

₹12 L/yr - ₹12 L/yr

Store Incharge
3 salaries
unlock blur

₹6 L/yr - ₹7.8 L/yr

Accounts Head
3 salaries
unlock blur

₹15 L/yr - ₹22.8 L/yr

Explore more salaries
Compare TOP STEEL NIGERIA with

Hindalco Industries

4.2
Compare

Hindustan Zinc

3.8
Compare

Vedanta Aluminium

3.9
Compare

Vedanta Resources

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview