Upload Button Icon Add office photos

TMEIC

Compare button icon Compare button icon Compare

Filter interviews by

TMEIC Production & Maintenance Engineer Interview Questions and Answers

Updated 15 Apr 2024

TMEIC Production & Maintenance Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Oct 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Power Electronics Based questions

Round 2 - Group Discussion 

GD Based Blockchain Technology

Interview Preparation Tips

Interview preparation tips for other job seekers - I am a fresher too

Interview questions from similar companies

I applied via Walk-in and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

Arithmetic and logical reasoning

Round 2 - Technical 

(1 Question)

  • Q1. Dc machines, transformers, ac machines

Interview Preparation Tips

Interview preparation tips for other job seekers - Try to prepare for aptitude
Keep your resume as short as possible.. prepare electrical machines
Interview experience
3
Average
Difficulty level
Hard
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jul 2023. There were 4 interview rounds.

Round 1 - Aptitude Test 

30min test from core subject

Round 2 - Group Discussion 

Usual GD on a relevant topic, everyone gets the opportunity to talk. Make relevant points and stick on to your opinion.

Round 3 - Technical 

(1 Question)

  • Q1. Complex technical questions from core subjects, application level questions should be expected.
Round 4 - HR 

(1 Question)

  • Q1. MR+HR round combined.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Jul 2024. There were 3 interview rounds.

Round 1 - Assignment 

About power system control system

Round 2 - Group Discussion 

Present trends and tgey willgive 10 min to think and note down

Round 3 - Technical 

(2 Questions)

  • Q1. About resume get good knowledge of what you have put in resume
  • Q2. And basic electricals
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Jul 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(5 Questions)

  • Q1. Question on Autocad
  • Q2. Question on Automatic Transfer Switch
  • Q3. Typer of Automatic Transfer switch
  • Ans. 

    Automatic Transfer Switches are devices used to automatically switch power sources in case of a power outage.

    • Types of automatic transfer switches include open transition, closed transition, and delayed transition.

    • Examples of automatic transfer switch manufacturers include Generac, Eaton, and Schneider Electric.

    • Automatic transfer switches are commonly used in backup power systems for critical facilities like hospitals,

  • Answered by AI
  • Q4. Purge command, layers
  • Q5. Load bank related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Drafting Work
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Power factor correction
  • Q2. Working of circuit breaker
  • Ans. 

    Circuit breakers are electrical switches designed to protect electrical circuits from damage caused by overload or short circuit.

    • Circuit breakers automatically trip when they detect an overload or short circuit in the electrical system.

    • They interrupt the flow of electricity to prevent damage to the circuit or electrical devices.

    • Circuit breakers can be reset manually after tripping to restore power to the circuit.

    • There ...

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I was interviewed before Mar 2024.

Round 1 - Technical 

(6 Questions)

  • Q1. What is transformer differential protection, and how is current transformer (CT) sizing determined?
  • Ans. 

    Transformer differential protection is a method to protect transformers from internal faults. CT sizing is determined based on the transformer's primary current rating.

    • Transformer differential protection compares the currents entering and leaving the transformer to detect internal faults.

    • Current transformers (CTs) are sized based on the transformer's primary current rating and the desired accuracy of the protection sch...

  • Answered by AI
  • Q2. What is unbalanced protection in electrical systems?
  • Ans. 

    Unbalanced protection in electrical systems is a type of protection that detects and responds to imbalances in current or voltage levels.

    • Unbalanced protection is used to detect faults such as phase-to-phase or phase-to-ground faults in electrical systems.

    • It helps prevent damage to equipment and ensures the safety of personnel by quickly isolating the faulty section of the system.

    • Examples of unbalanced protection device...

  • Answered by AI
  • Q3. Is the use of a smartphone camera flasher permitted while assessing old switchgears for modernization?
  • Ans. 

    Yes, the use of a smartphone camera flasher is permitted while assessing old switchgears for modernization.

    • Using a smartphone camera flasher can help illuminate dark areas and improve visibility while assessing old switchgears.

    • It can assist in capturing clear and detailed images for documentation and analysis.

    • Ensure that the flash does not interfere with any sensitive equipment or cause any safety hazards.

    • Consider usin...

  • Answered by AI
  • Q4. What is your current CTC, and what are your salary expectations?
  • Ans. 

    I am currently earning X amount and my salary expectations are Y amount.

    • Mention your current CTC (Cost to Company)

    • Clearly state your salary expectations

    • Consider factors like experience, industry standards, and job responsibilities when stating salary expectations

  • Answered by AI
  • Q5. What are your reasons for wanting to leave your current company?
  • Ans. 

    Seeking new challenges and opportunities for growth.

    • Desire for new challenges and learning opportunities

    • Limited growth potential in current role

    • Seeking a more innovative and dynamic work environment

  • Answered by AI
  • Q6. What inputs do you collect during a site visit for the assessment of existing switchgear when considering the retrofit of circuit breakers?
  • Ans. 

    During a site visit for assessing existing switchgear for retrofitting circuit breakers, inputs collected include equipment specifications, condition, age, and load requirements.

    • Collect equipment specifications such as voltage rating, current rating, and interrupting capacity.

    • Assess the condition of the existing switchgear to determine if it can accommodate the new circuit breakers.

    • Consider the age of the switchgear to...

  • Answered by AI
Round 2 - HR 

(5 Questions)

  • Q1. Tell me about yourself.
  • Q2. What are your reasons for wanting to leave your current company?
  • Ans. 

    Seeking new challenges and opportunities for growth.

    • Desire for new challenges and learning opportunities

    • Limited growth potential in current role

    • Seeking a more innovative and dynamic work environment

  • Answered by AI
  • Q3. What are your reasons for wanting to change your career?
  • Ans. 

    Seeking new challenges and opportunities for growth in a field that aligns more closely with my interests and skills.

    • Desire for new challenges and opportunities

    • Interest in pursuing a career that aligns better with skills and passions

    • Seeking professional growth and development

    • Exploring a field with more potential for advancement

    • Wanting to broaden knowledge and experience in a different industry

  • Answered by AI
  • Q4. What is your current Cost to Company (CTC), and what is your expected CTC?
  • Ans. 

    My current CTC is $80,000 per year, and my expected CTC is $90,000 per year.

    • Current CTC: $80,000 per year

    • Expected CTC: $90,000 per year

    • Reasons for expecting increase in CTC (if applicable)

  • Answered by AI
  • Q5. Are you open to relocation?
  • Ans. 

    Yes, I am open to relocation for the right opportunity.

    • I am willing to relocate for the right job opportunity that aligns with my career goals.

    • I am open to exploring new locations and experiencing different cultures.

    • I understand that relocation may be necessary for career advancement and growth.

  • Answered by AI

I was interviewed before Sep 2016.

Interview Questionnaire 

1 Question

  • Q1. Ocampo, basic electronics and C

Interview Preparation Tips

Round: Test
Duration: 1 hour
Total Questions: 50

Skills: Embedded Systems, C Programming
College Name: Sahyadri college of engineering

Interview Questionnaire 

3 Questions

  • Q1. Why do you want to join the company
  • Ans. 

    I want to join the company because of its innovative projects and strong company culture.

    • I am impressed by the company's track record of successful projects.

    • I believe the company's values align with my own professional goals.

    • I am excited about the opportunity to work with a talented team of professionals.

    • I see great potential for growth and development within the company.

  • Answered by AI
  • Q2. Why should we choose you
  • Ans. 

    I am a dedicated and hardworking individual with relevant skills and experience.

    • I have a strong work ethic and am committed to delivering high-quality results.

    • I have relevant experience and skills that align with the requirements of the position.

    • I am a quick learner and adaptable to new environments.

    • I am passionate about the industry and eager to contribute to the team.

  • Answered by AI
  • Q3. What profile would you like to like to work in
  • Ans. 

    I would like to work in a marketing and communications profile.

    • Experience in creating marketing campaigns

    • Strong communication skills

    • Ability to analyze market trends and consumer behavior

    • Proficiency in social media and digital marketing

    • Collaboration with cross-functional teams

  • Answered by AI

Interview Preparation Tips

College Name: NIT Kurukshetra

Interview Questionnaire 

1 Question

  • Q1. About Yourself

Interview Preparation Tips

Round: Test
Experience: Test level was medium, as i also sat for mahindra, i found L&T test was harder than mahindra!
Tips: Just study RS agarwal

Round: Group Discussion
Experience: It was easy for me, coz i was aware about tips of GD
Tips: Be the leader, if possibleTalk in between, even if u dont know topic much
Duration: 20 minutes

Round: Interview
Experience: This question was damn easy for me, coz i can talk more based on my activities & resume
Tips: Dont hesitate, stay calm & describe yourself, but not family background

General Tips: Be yourself, no technical knowledge is required(depends on panel u get)
Skill Tips: ""
College Name: IIT Roorkee
Motivation: To get placed!

TMEIC Interview FAQs

How many rounds are there in TMEIC Production & Maintenance Engineer interview?
TMEIC interview process usually has 2 rounds. The most common rounds in the TMEIC interview process are Aptitude Test and Group Discussion.

Tell us how to improve this page.

TMEIC Production & Maintenance Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Siemens Interview Questions
4.1
 • 418 Interviews
Johnson Controls Interview Questions
3.6
 • 262 Interviews
ABB Interview Questions
4.1
 • 235 Interviews
BHEL Interview Questions
4.1
 • 113 Interviews
GE Interview Questions
4.2
 • 102 Interviews
View all
Senior Engineer
67 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
64 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
54 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
50 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
30 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare TMEIC with

Siemens

4.1
Compare

ABB

4.1
Compare

Schneider Electric

4.1
Compare

BHEL

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview