Synergy Maritime Engineer Trainee Interview Questions and Answers

Q1. Conduct technical interview and aptitude test
Add your answer

Q1. How many times hipot test can be done on a cable?
Ans. 
The hipot test can be done on a cable multiple times depending on the specific requirements and standards.
• The number of times a hipot test can be done on a cable depends on the cable's specifications and the testing requirements.

• Generally, a hipot test is performed once during the manufacturing process to ensure the cable's insulation integrity.

• However, additional hipot tests may be conducted during the cable's lifespa...read more
Answered by AI
Add your answer
Q2. What if battery polarity is inverse with respect to battery charger?
Ans. 
If battery polarity is inverse with respect to battery charger, it can lead to damage or malfunction.
• Inverse polarity can cause short circuits or overheating.

• It can damage the battery, charger, or both.

• Reverse polarity protection circuits can prevent damage.

• Always double-check the polarity before connecting the battery to the charger.
Answered by AI
Add your answer
Q3. How many types of earthing are there?
Ans. 
There are several types of earthing used in electrical systems.
• The most common types of earthing are:

• - TN-S system: Separate neutral and protective earth conductors

• - TN-C system: Combined neutral and protective earth conductors

• - TN-C-S system: Combination of TN-S and TN-C systems

• - TT system: Separate earth electrode for each electrical installation

• - IT system: No direct connection between earth and neutral

• Each type of ...read more
Answered by AI
Add your answer
Q4. What type of quality documents you have handled?
Ans. 
I have handled various quality documents such as quality control plans, inspection reports, and non-conformance reports.
• Quality control plans

• Inspection reports

• Non-conformance reports
Answered by AI
Add your answer
Q5. What are the tests performed on PT?
Add your answer
Q6. What are the tests done on power transformer?
Ans. 
Tests done on power transformers include insulation resistance, turns ratio, winding resistance, and dielectric tests.
• Insulation resistance test checks the insulation quality of the transformer.

• Turns ratio test measures the ratio of primary to secondary turns.

• Winding resistance test determines the resistance of transformer windings.

• Dielectric tests assess the dielectric strength and insulation properties of the transfo...read more
Answered by AI
Add your answer
Q7. What is the process of hipot in busbar, breakers, cables and trafo?
Ans. 
Hipot testing is a process used to verify the insulation integrity of busbars, breakers, cables, and transformers.
• Hipot testing involves applying a high voltage to the component being tested.

• The purpose is to check for any insulation breakdown or leakage current.

• For busbars and cables, the test is typically performed between the conductor and the ground.

• For breakers and transformers, the test is performed between diffe...read more
Answered by AI
View 1 more answer
Q8. What is the difference between IR, WR and CR?
Ans. 
IR, WR, and CR are abbreviations used in different contexts. IR stands for Infrared, WR stands for Weather Resistant, and CR stands for Compression Ratio.
• IR refers to Infrared, which is a type of electromagnetic radiation with longer wavelengths than visible light.

• WR is used to indicate that a product or material is designed to withstand various weather conditions.

• CR is a term commonly used in engineering and physics t...read more
Answered by AI
Add your answer
Q9. Where is tap changer in a transfermer located and why?If the voltage output in secondary decreases what will be location of tap changer?
Ans. 
Tap changer in a transformer is located on the high voltage winding side to regulate the voltage output.
• Tap changer is typically located on the high voltage winding side of a transformer.

• It is used to adjust the turns ratio and regulate the voltage output.

• If the voltage output in the secondary decreases, the tap changer will be moved to a higher tap position to increase the voltage.
Answered by AI
View 1 more answer

Q1. Gauging calculation
Add your answer
Q2. Shipment handling
Add your answer

Q1. Professional experience
Add your answer
Q2. Emergency situations
Add your answer

Q1. Which type of electrode is used in P91 welding?
Ans. 
P91 welding typically uses a low hydrogen type electrode.
• Low hydrogen type electrode is commonly used in P91 welding

• The electrode helps prevent hydrogen-induced cracking in the weld

• Examples of low hydrogen electrodes include E7018 and E7016
Answered by AI
Add your answer
Q2. What is PWHT??
Ans. 
PWHT stands for Post Weld Heat Treatment, a process used to relieve residual stresses and improve the mechanical properties of welded joints.
• PWHT involves heating the welded joint to a specific temperature for a certain period of time, followed by controlled cooling.

• The process helps to reduce hardness, increase ductility, and improve toughness of the welded joint.

• PWHT is commonly used in industries such as oil and gas...read more
Answered by AI
Add your answer

Prepare for aptitude

Q1. Process improvement, HAZOP, SIL
Add your answer
Q2. ERP, DCS operation
Add your answer

Q1. Compensation and benefits
Add your answer

Proove you are eligible for achive targate and focused to job.