Filter interviews by
I applied via Walk-in and was interviewed in Apr 2021. There was 1 interview round.
An engine converts fuel into mechanical energy to power a vehicle or machine.
Fuel is ignited in a combustion chamber, creating high-pressure gases that push pistons.
The pistons turn a crankshaft, which converts the up-and-down motion into rotational motion.
The rotational motion is transferred to the wheels or other machinery to create movement.
Different types of engines include gasoline, diesel, electric, and hybrid.
Ef...
A flywheel is a mechanical device used to store rotational energy. It is used in various applications such as engines and power plants.
Flywheels are used to maintain a constant speed in machines that experience fluctuations in power supply.
They are also used to store energy and release it when needed, such as in hybrid cars.
Flywheels can be made of various materials such as steel, aluminum, and carbon fiber.
They are co...
An engine is a machine that converts fuel into mechanical energy to power a vehicle or other machinery.
Engines come in various types, including gasoline, diesel, electric, and hybrid.
They work by igniting fuel in a combustion chamber, which creates pressure that moves pistons and turns a crankshaft.
The power generated by the engine is used to propel a vehicle or operate machinery.
Engines require regular maintenance to ...
The crankshaft converts reciprocating motion into rotational motion.
Converts linear motion into rotational motion
Transfers power from pistons to drive train
Consists of main journals, rod journals, and crankpins
Balancing is important to reduce vibration and wear
Commonly made of forged steel or cast iron
Used in internal combustion engines, steam engines, and pumps
I applied via Campus Placement and was interviewed in Sep 2023. There were 2 interview rounds.
When an engine reaches full speed RPM, it is operating at its maximum rotational speed.
Full speed RPM indicates the engine is running at its highest rotational speed
Reaching full speed RPM is important for optimal performance and efficiency
Engine components must be properly assembled to ensure it can reach full speed RPM
Examples: Car engine reaching 7000 RPM, industrial motor reaching 3000 RPM
We manufacture a variety of HP engines for different applications.
We produce HP engines for a range of vehicles, including cars, trucks, and motorcycles.
Our HP engines are designed to meet specific performance requirements for each application.
We offer a diverse selection of HP engines with varying power outputs and features.
Some examples of our HP engines include turbocharged models for high performance vehicles and f
I applied via Recruitment Consultant and was interviewed in Jan 2018. There were 6 interview rounds.
I applied via Company Website and was interviewed before Jun 2019. There was 1 interview round.
I applied via Naukri.com and was interviewed in Nov 2021. There were 2 interview rounds.
posted on 24 Feb 2025
I was interviewed in Aug 2024.
The 7QC tools are a set of quality control tools used for process improvement and problem-solving in manufacturing and other industries.
Check sheets: Used to collect and organize data for analysis.
Cause-and-effect diagrams (Fishbone diagrams): Used to identify and analyze potential causes of a problem.
Control charts: Used to monitor process variation over time.
Histograms: Used to show the frequency distribution of a se...
The 8D methodology is a problem-solving approach used to identify, correct, and prevent recurring problems.
8D stands for 8 disciplines, each representing a step in the problem-solving process
It involves creating a team, defining the problem, implementing short-term containment actions, identifying root causes, implementing permanent corrective actions, and preventing recurrence
Examples of tools used in 8D methodology i...
8D is a problem-solving methodology used in quality management to identify, correct, and prevent recurring problems.
8D stands for Eight Disciplines
It is a structured problem-solving process typically used in the automotive industry
Each discipline represents a step in the process, from defining the problem to implementing long-term solutions
Any improvement in your industry
Did you profit for any Quality process
I applied via Walk-in and was interviewed in Jun 2021. There was 1 interview round.
The firing order of a 4 cylinder engine is 1-3-4-2.
Firing order refers to the sequence in which each cylinder fires during the engine's cycle.
The firing order is determined by the engine's design and can vary between different types of engines.
In a 4 cylinder engine, the firing order is usually 1-3-4-2.
This means that the first cylinder to fire is the one closest to the front of the engine, followed by the third cylind
The connecting rod is a crucial component in an engine that connects the piston to the crankshaft.
Transfers the linear motion of the piston to the rotational motion of the crankshaft
Converts reciprocating motion into rotational motion
Provides a link between the piston and the crankshaft
Helps in transmitting power from the piston to the crankshaft
Acts as a lever to amplify the force exerted by the piston
Plays a role in ...
Piston rings are of three types: compression rings, oil control rings, and wiper rings.
Compression rings seal the combustion chamber and transfer heat from the piston to the cylinder wall.
Oil control rings regulate the amount of oil on the cylinder wall and prevent oil from entering the combustion chamber.
Wiper rings scrape excess oil from the cylinder wall and prevent it from entering the combustion chamber.
Materials ...
FIP stands for Fixed Index Annuity.
FIP is a type of annuity that offers a guaranteed minimum interest rate.
The interest rate is linked to a stock market index, such as the S&P 500.
The interest rate is fixed for a certain period of time, usually several years.
FIPs are often used as a retirement savings vehicle.
They offer the potential for higher returns than traditional fixed annuities, but with less risk than investing
0.1 microns is equal to 100 nanometers.
1 micron is equal to 1000 nanometers.
Therefore, 0.1 micron is equal to 100 nanometers.
Microns and nanometers are units of length used to measure very small distances.
This conversion is commonly used in fields like nanotechnology and microscopy.
I was interviewed in Sep 2022.
posted on 28 Apr 2022
I applied via Walk-in and was interviewed in May 2022. There was 1 interview round.
posted on 12 May 2022
I applied via Campus Placement and was interviewed before May 2021. There was 1 interview round.
GD&T stands for Geometric Dimensioning and Tolerancing. It is used to define and communicate engineering tolerances.
GD&T is a symbolic language used to specify the size, shape, orientation, and location of features on a part.
It ensures that parts are manufactured to the correct dimensions and fit together properly.
GD&T is used in quality to improve communication between design, engineering, and manufacturing teams.
It h...
MS Excel commands used?
Data sorting and filtering
Conditional formatting
Pivot tables and charts
VLOOKUP and HLOOKUP functions
IF and SUM functions
Casting is a manufacturing process in which a liquid material is poured into a mold, allowed to solidify, and then removed from the mold.
The liquid material can be metal, plastic, or ceramic.
The mold is typically made of sand, plaster, or metal.
The casting process can be used to create complex shapes and parts.
Examples of cast parts include engine blocks, turbine blades, and jewelry.
The process can be done using gravit...
Forging is a manufacturing process where metal is shaped by applying compressive forces using a hammer or press.
Metal is heated to a high temperature to make it malleable
The metal is then shaped using a hammer or press
Forging can be done using different techniques such as open die forging, closed die forging, and seamless ring rolling
Forging is used to create high-strength components for various industries such as aero
The least count of a vernier caliper is the smallest measurement that can be read on the scale.
The least count is determined by the number of divisions on the vernier scale and the main scale.
It is usually expressed in fractions of a millimeter or inch.
For example, a vernier caliper with 20 divisions on the vernier scale and 1mm on the main scale has a least count of 0.05mm.
The least count is important for accurate mea...
based on 5 reviews
Rating in categories
Diploma Trainee Engineer
28
salaries
| ₹0 L/yr - ₹0 L/yr |
Diploma Engineer
21
salaries
| ₹0 L/yr - ₹0 L/yr |
Mechanical Engineer
20
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineer
18
salaries
| ₹0 L/yr - ₹0 L/yr |
Associate Engineer
14
salaries
| ₹0 L/yr - ₹0 L/yr |
Mahindra & Mahindra
Escorts Kubota Limited
Tractors and Farm Equipment
Ashok Leyland